Showing 337–352 of 464 results
-


$ 1,299
The Rolex Lady-Datejust 28 279381RBR super clone features the 28mm Everose Rolesor watch paired with a factory diamond-set bezel and a warm sundust dial, finished to 98% visual and dimensional parity with the genuine reference. This Lady-Datejust 279381RBR Super Clone sets diamond hour markers across the dial and carries the five-link Jubilee bracelet with a concealed Crownclasp, priced at $1,499 against a genuine retail figure near $20,800.
This Everose Lady-Datejust Super Clone uses an Oystersteel case, an 18k Everose gold bezel set with a row of brilliant-cut diamonds, and a Jubilee bracelet that pairs Oystersteel outer links with Everose gold center links. The RBR suffix on the reference marks the factory diamond-set bezel, and the sundust dial reads as a warm grey-bronze tone that shifts under light. A Swiss-grade clone of Rolex Caliber 2236 drives the timekeeping at 28,800 vibrations per hour with a roughly 55-hour power reserve. The watch ships from a top-tier specialist factory that produces the complete watch, with a full quality control pass, insured worldwide delivery, and a 1-year limited warranty.
| Reference |
279381RBR |
| Case |
28mm Everose Rolesor |
| Dial |
Sundust with diamond hour markers |
| Movement |
Swiss-grade Caliber 2236 clone, automatic |
| Power Reserve |
Approximately 55 hours |
| Frequency |
28,800 vph (4 Hz) |
| Water Res. |
100 meters |
| Crystal |
Sapphire with Cyclops date lens, anti-reflective coating |
| Bezel |
18k Everose gold, factory diamond-set |
| Bracelet |
Jubilee, Everose Rolesor, concealed Crownclasp |
| Functions |
Hours, minutes, seconds, date |
-


$ 1,299
The Rolex Lady-Datejust 28 279383RBR super clone features the 28mm yellow Rolesor ladies watch paired with a diamond-set 18k yellow gold bezel and a white dial set with diamond hour markers, finished to 98% visual and dimensional parity with the genuine reference. This Lady-Datejust 279383RBR Super Clone carries a date at 3 oclock under a Cyclops lens and the Jubilee bracelet with a concealed Crownclasp, priced at $1,499 against a genuine retail figure near $19,500.
This two-tone Lady-Datejust Super Clone combines a polished Oystersteel case with an 18k yellow gold bezel ring set with brilliant-cut diamonds, the configuration the RBR suffix denotes on the genuine reference. A Swiss-grade clone of Rolex Caliber 2236 drives the timekeeping at 28,800 vibrations per hour with a power reserve of approximately 55 hours. The 279383RBR sits in the current Lady-Datejust 28 generation, and this super clone matches the case proportions, the diamond bezel layout, and the dial configuration of that production run. The watch ships from a top-tier specialist factory that produces the complete watch, with a full quality control pass, insured worldwide delivery, and a 1-year limited warranty.
| Reference |
279383RBR |
| Case |
28mm, yellow Rolesor |
| Dial |
White with diamond hour markers |
| Movement |
Swiss-grade Caliber 2236 clone, automatic |
| Power Reserve |
Approximately 55 hours |
| Frequency |
28,800 vph (4 Hz) |
| Water Res. |
100 meters |
| Crystal |
Sapphire with Cyclops date lens, anti-reflective coating |
| Bezel |
18k yellow gold, diamond-set |
| Bracelet |
Jubilee, five-piece links, concealed Crownclasp |
| Functions |
Hours, minutes, seconds, date |
-


$ 1,299
The Rolex Lady-Datejust 28 279383RBR-0003 super clone features the 28mm yellow Rolesor ladies watch paired with a factory-style diamond bezel and a champagne dial set with diamond hour markers, finished to 98% visual and dimensional parity with the genuine reference. This Lady-Datejust 279383RBR-0003 Super Clone carries a date at 3 oclock under a Cyclops lens and the five-piece-link Jubilee bracelet, priced at $1,599 against a genuine market figure near $24,500.
This two-tone Lady-Datejust Super Clone uses an Oystersteel case, an 18k yellow gold bezel ringed with brilliant-cut diamonds, and a Jubilee bracelet that closes on a concealed Crownclasp. A Swiss-grade clone of Rolex Caliber 2236 drives the timekeeping at 28,800 vibrations per hour with a power reserve of approximately 55 hours. The RBR suffix marks the factory diamond-set bezel, and the -0003 suffix marks the champagne dial with diamond hour markers, so this super clone matches both the case proportions and the gem-set dial layout of that specific configuration. The watch ships from a top-tier specialist factory with a full quality control pass, insured worldwide delivery, and a 1-year limited warranty.
| Reference |
279383RBR-0003 |
| Case |
28mm yellow Rolesor, Oystersteel and 18k gold |
| Dial |
Champagne with diamond hour markers |
| Movement |
Swiss-grade Caliber 2236 clone, automatic |
| Power Reserve |
Approximately 55 hours |
| Frequency |
28,800 vph (4 Hz) |
| Water Res. |
100 meters |
| Crystal |
Sapphire with Cyclops date lens, anti-reflective coating |
| Bezel |
18k yellow gold set with brilliant-cut diamonds |
| Bracelet |
Jubilee, five-piece links, concealed Crownclasp |
| Functions |
Hours, minutes, seconds, date |
-

$ 1,299
The Rolex Lady-Datejust 279384RBR super clone features the 28mm white Rolesor dress watch paired with a diamond-set bezel and a pink dial, finished to 98% visual and dimensional parity with the genuine reference. This Lady-Datejust 279384RBR Super Clone carries diamond hour markers, a date at 3 oclock under a Cyclops lens, and the five-link Jubilee bracelet, priced at $1,499 against a genuine market figure near $14,800.
This white Rolesor Lady-Datejust Super Clone uses an Oystersteel case with an 18k white gold diamond-set bezel, the configuration the RBR suffix marks on the genuine reference. The pink dial carries diamond hour markers and a date aperture at 3 oclock framed by a polished surround. A Swiss-grade clone of Rolex Caliber 2236 drives the timekeeping at 28,800 vibrations per hour with a roughly 55-hour power reserve. The 279384RBR sits in the current Lady-Datejust 28 catalogue as the diamond-bezel white Rolesor model, and this super clone matches the case proportions, the bezel stone layout, and the dial set of that production reference. The watch ships from a top-tier specialist factory with a full quality control pass, insured worldwide delivery, and a 1-year limited warranty.
| Reference |
279384RBR |
| Case |
28mm, white Rolesor |
| Dial |
Pink with diamond hour markers |
| Movement |
Swiss-grade Caliber 2236 clone, automatic |
| Power Reserve |
Approximately 55 hours |
| Frequency |
28,800 vph (4 Hz) |
| Water Res. |
100 meters |
| Crystal |
Sapphire with Cyclops date lens, anti-reflective coating |
| Bezel |
18k white gold, diamond-set |
| Bracelet |
Jubilee, five-piece links, concealed Crownclasp |
| Functions |
Hours, minutes, seconds, date |
-


$ 1,299
The Rolex Lady-Datejust 28 279384RBR super clone features the 28mm white Rolesor case paired with an 18k white gold diamond-set bezel and a white mother-of-pearl dial, finished to 98% visual and dimensional parity with the genuine reference. This Lady-Datejust 279384RBR Super Clone carries diamond hour markers, a date at 3 oclock under a Cyclops lens, and the five-link Jubilee bracelet, priced at $1,499 against a genuine retail figure near $19,000.
This white Rolesor Lady-Datejust Super Clone uses a polished Oystersteel case, an 18k white gold bezel set with a ring of round-cut diamonds, and a Jubilee bracelet closed by a concealed Crownclasp. The white mother-of-pearl dial shows the natural shell shimmer that gives each genuine 279384RBR dial a unique surface, and the diamond hour markers replace printed indexes for a fully gem-set face. A Swiss-grade clone of Rolex Caliber 2236 drives the timekeeping at 28,800 vibrations per hour with a roughly 55-hour power reserve. The RBR suffix in the reference confirms the factory diamond-set bezel that defines this variant. The watch ships from a top-tier specialist factory with a full quality control pass, insured worldwide delivery, and a 1-year limited warranty.
| Reference |
279384RBR |
| Case |
28mm white Rolesor, Oystersteel |
| Dial |
White mother-of-pearl, diamond markers |
| Movement |
Swiss-grade Caliber 2236 clone, automatic |
| Power Reserve |
Approximately 55 hours |
| Frequency |
28,800 vph (4 Hz) |
| Water Res. |
100 meters |
| Crystal |
Sapphire with Cyclops date lens, anti-reflective coating |
| Bezel |
18k white gold, diamond-set |
| Bracelet |
Jubilee, five-piece links, concealed Crownclasp |
| Functions |
Hours, minutes, seconds, date |
-


$ 1,299
The Rolex Lady-Datejust 28 super clone features the 28mm Oystersteel case paired with a smooth domed steel bezel and a soft pink dial, finished to 98% visual and dimensional parity with the genuine reference. This Lady-Datejust 28 Super Clone carries a date at 3 oclock under a Cyclops lens and the three-link Oyster bracelet, priced at $1,299 against a genuine market figure near $8,100.
This steel Lady-Datejust Super Clone uses a polished Oystersteel case, a mirror-polished smooth domed bezel, and an Oyster bracelet that closes with a folding Oysterclasp. A Swiss-grade clone of Rolex Caliber 2236 drives the timekeeping at 28,800 vibrations per hour with a roughly 55-hour power reserve. The Lady-Datejust 28 is the smallest classic Datejust size in the Rolex catalogue, and this super clone matches the case proportions, the pink dial layout, and the applied steel marker placement of the genuine reference. The watch ships from a top-tier specialist factory that produces the complete watch, with a full quality control pass, insured worldwide delivery, and a 1-year limited warranty.
| Reference |
279160 (closest match) |
| Case |
28mm × 8mm, Oystersteel |
| Dial |
Pink with smooth steel bezel |
| Movement |
Swiss-grade Caliber 2236 clone, automatic |
| Power Reserve |
Approximately 55 hours |
| Frequency |
28,800 vph (4 Hz) |
| Water Res. |
100 meters |
| Crystal |
Sapphire with Cyclops date lens, anti-reflective coating |
| Bezel |
Smooth domed Oystersteel, mirror-polished |
| Bracelet |
Oyster, three-piece links, folding Oysterclasp |
| Functions |
Hours, minutes, seconds, date |
-

$ 1,299
The Rolex Lady-Datejust 69173 super clone features the 26mm yellow Rolesor dress watch paired with an 18k yellow gold fluted bezel and a warm champagne dial, finished to 98% visual and dimensional parity with the genuine reference. This Lady-Datejust 69173 Super Clone carries applied yellow gold hour markers, a date at 3 oclock under a Cyclops lens, and the five-link Jubilee bracelet, priced at $1,299 against a genuine pre-owned market figure near $5,400.
This two-tone Lady-Datejust Super Clone uses a stainless steel case, an 18k yellow gold fluted bezel, and a Jubilee bracelet with a concealed Crownclasp. A Swiss-grade clone of Rolex Caliber 2135 drives the timekeeping at 28,800 vibrations per hour with a roughly 42-hour power reserve. Rolex produced the 69173 from the late 1980s into the 2000s as the defining yellow Rolesor Lady-Datejust 26, and this super clone matches the case proportions, the bezel cut, and the dial layout of that production run. The watch ships from a top-tier specialist factory that produces the complete watch, with a full quality control pass, insured worldwide delivery, and a 1-year limited warranty.
| Reference |
69173 |
| Case |
26mm, yellow Rolesor |
| Dial |
Champagne with gold markers |
| Movement |
Swiss-grade Caliber 2135 clone, automatic |
| Power Reserve |
Approximately 42 hours |
| Frequency |
28,800 vph (4 Hz) |
| Water Res. |
100 meters |
| Crystal |
Sapphire with Cyclops date lens, anti-reflective coating |
| Bezel |
18k yellow gold fluted |
| Bracelet |
Jubilee, five-piece links, concealed Crownclasp |
| Functions |
Hours, minutes, seconds, date |
-


$ 1,299
The Rolex Lady-Datejust 69173 super clone features the 26mm yellow Rolesor ladies dress watch paired with an 18k yellow gold fluted bezel and a champagne dial set with diamond hour markers, finished to 98% visual and dimensional parity with the genuine reference. This Lady-Datejust 69173 Super Clone carries a date at 3 oclock under a Cyclops lens and the five-link Jubilee bracelet, priced at $1,299 against a genuine pre-owned market figure near $5,400.
This two-tone Lady-Datejust Super Clone combines a polished stainless steel case with a gold-finished fluted bezel, a diamond-marker champagne dial, and a Jubilee bracelet that closes on a concealed Crownclasp. A Swiss-grade clone of Rolex Caliber 2135 drives the timekeeping at 28,800 vibrations per hour with a roughly 42-hour power reserve. The reference 69173 ran in the Rolex catalogue from about 1988 to 1999 as the yellow Rolesor Lady-Datejust 26, and this super clone matches the case proportions, the bezel cut, and the dial layout of that production run. The watch ships from a top-tier specialist factory with a full quality control pass, insured worldwide delivery, and a 1-year limited warranty.
| Reference |
69173 |
| Case |
26mm yellow Rolesor (steel + 18k gold) |
| Dial |
Champagne with diamond hour markers |
| Movement |
Swiss-grade Caliber 2135 clone, automatic |
| Power Reserve |
Approximately 42 hours |
| Frequency |
28,800 vph (4 Hz) |
| Water Res. |
100 meters |
| Crystal |
Sapphire with Cyclops date lens, anti-reflective coating |
| Bezel |
18k yellow gold fluted bezel |
| Bracelet |
Jubilee, five-piece links, concealed Crownclasp |
| Functions |
Hours, minutes, seconds, date |
-


$ 1,299
The Rolex Lady-Datejust 69178 super clone features the 26mm solid 18k yellow gold dress watch paired with a fluted yellow gold bezel and a rare green malachite stone dial, finished to 98% visual and dimensional parity with the genuine reference. This Lady-Datejust 69178 Super Clone carries applied yellow gold hour markers, a date at 3 oclock under a Cyclops lens, and the President bracelet, priced at $1,499 against a genuine vintage market figure near $12,500.
This yellow gold Lady-Datejust Super Clone uses a solid 18k yellow gold case, a fully fluted 18k yellow gold bezel, and the President bracelet with a concealed Crownclasp. A Swiss-grade clone of Rolex Caliber 2135 drives the timekeeping at 28,800 vibrations per hour with a power reserve of approximately 42 hours. The 69178 ran in the Rolex catalogue from the late 1980s into the 1990s as the all-gold Lady-Datejust 26 with the President bracelet, and this super clone matches the case proportions, the fluted bezel, and the malachite dial layout of that production run. The malachite stone dial is a rare factory option, prized by collectors for its banded green grain that gives each watch a one-of-a-kind face. The watch ships from a top-tier specialist factory that produces the complete watch, with a full quality control pass, insured worldwide delivery, and a 1-year limited warranty.
| Reference |
69178 |
| Case |
26mm, solid 18k yellow gold |
| Dial |
Green malachite with fluted gold bezel |
| Movement |
Swiss-grade Caliber 2135 clone, automatic |
| Power Reserve |
Approximately 42 hours |
| Frequency |
28,800 vph (4 Hz) |
| Water Res. |
100 meters |
| Crystal |
Sapphire with Cyclops date lens, anti-reflective coating |
| Bezel |
Fluted 18k yellow gold |
| Bracelet |
President, semi-circular three-piece links, concealed Crownclasp |
| Functions |
Hours, minutes, seconds, date |
-


$ 1,299
The Rolex Milgauss 116400 super clone features the 40mm Oystersteel anti-magnetic watch finished to 98% visual and dimensional parity with the genuine reference. This 116400 Super Clone carries a black dial, the signature orange lightning-bolt seconds hand, a smooth polished steel bezel, and a clear sapphire crystal, priced at $1,349 against a genuine retail near $8,950.
This steel Milgauss Super Clone uses a polished and brushed Oystersteel case, a smooth domed steel bezel, and a three-link Oyster bracelet with an Oysterlock safety clasp. A Swiss-grade clone of Rolex Caliber 3131 drives the watch at 28,800 vibrations per hour with a 48-hour power reserve. A soft-iron Faraday shield surrounds the movement for resistance to magnetic fields up to 1,000 gauss. The watch ships from a top-tier specialist factory with a full quality control pass, insured worldwide delivery, and a 1-year limited warranty.
| Reference |
116400 |
| Case |
40mm × 13.0mm, Oystersteel |
| Dial |
Black with orange lightning-bolt seconds hand |
| Movement |
Swiss-grade Caliber 3131 clone, automatic anti-magnetic |
| Power Reserve |
48 hours |
| Frequency |
28,800 vph (4 Hz) |
| Water Res. |
100 meters |
| Crystal |
Clear sapphire, anti-reflective coating |
| Bezel |
Smooth polished Oystersteel, domed |
| Bracelet |
Oyster, three-piece links, Oysterlock safety clasp |
| Functions |
Hours, minutes, seconds |
| Magnetic Resistance |
1,000 gauss soft-iron shield |
-


$ 1,299
The Rolex Milgauss 116400-0002 super clone features the 40mm Oystersteel anti-magnetic watch paired with a white dial and the orange lightning-bolt seconds hand, finished to 98% visual and dimensional parity with the genuine reference. This Milgauss 116400 Super Clone carries a smooth polished steel bezel, a clear sapphire crystal, and the three-link Oyster bracelet, priced at $1,349 against a genuine retail near $9,500.
This steel Milgauss Super Clone uses a polished and brushed Oystersteel case, a smooth domed bezel, and an Oyster bracelet with a folding Oysterlock safety clasp. A Swiss-grade clone of Rolex Caliber 3131 drives the timekeeping at 28,800 vibrations per hour with a 48-hour power reserve. The watch ships from a top-tier specialist factory with a full quality control pass, insured worldwide delivery, and a 1-year limited warranty.
| Reference |
116400-0002 |
| Case |
40mm × 13.0mm, Oystersteel |
| Dial |
White with luminous markers |
| Movement |
Swiss-grade Caliber 3131 clone, automatic antimagnetic |
| Power Reserve |
48 hours |
| Frequency |
28,800 vph (4 Hz) |
| Water Res. |
100 meters |
| Crystal |
Clear sapphire, anti-reflective coating |
| Bezel |
Smooth polished Oystersteel, domed |
| Bracelet |
Oyster, three-piece links, Oysterlock safety clasp |
| Functions |
Hours, minutes, seconds |
-


$ 1,299
The Rolex Milgauss 116400GV super clone features the 40mm Oystersteel anti-magnetic watch paired with the green-tinted sapphire crystal collectors call the GV, finished to 98% visual and dimensional parity with the genuine reference. This 116400GV Super Clone carries a black dial, the orange lightning-bolt seconds hand, a smooth polished bezel, and the three-link Oyster bracelet, priced at $1,349 against a genuine retail near $9,650.
This steel Milgauss Super Clone uses a polished and brushed Oystersteel case, a domed green sapphire crystal, and an Oyster bracelet with a folding Oysterclasp safety closure. A Swiss-grade clone of Rolex Caliber 3131 drives the timekeeping at 28,800 vibrations per hour with a 48-hour power reserve. The watch carries a soft-iron Faraday shield around the movement for resistance to magnetic fields up to 1,000 gauss. The watch ships from a top-tier specialist factory with a full quality control pass, insured worldwide delivery, and a 1-year limited warranty.
| Reference |
116400GV |
| Case |
40mm × 13.0mm, Oystersteel |
| Dial |
Black with luminous markers |
| Movement |
Swiss-grade Caliber 3131 clone, automatic |
| Power Reserve |
48 hours |
| Frequency |
28,800 vph (4 Hz) |
| Water Res. |
100 meters |
| Crystal |
Green-tinted sapphire, scratch-resistant |
| Bezel |
Smooth polished Oystersteel, fixed |
| Bracelet |
Oyster, three-piece links, Oysterclasp |
| Functions |
Hours, minutes, seconds |
| Anti-Magnetic |
Soft-iron Faraday shield, resistant to 1,000 gauss |
-


$ 1,299
The Rolex Milgauss 116400GV super clone features the 40mm steel anti-magnetic watch fitted with the green-tinted sapphire crystal collectors associate with this reference, finished to 98% visual and dimensional parity with the genuine model. This 116400GV Super Clone carries the Z-blue electric blue dial, the orange lightning-bolt seconds hand, a smooth polished steel bezel, and the steel Oyster bracelet, priced at $1,399 against a genuine retail near $8,950.
This steel Milgauss Super Clone uses a polished and brushed Oyster case, a smooth polished steel bezel with no insert, and a three-link Oyster bracelet with a folding Oysterclasp. A Swiss-grade clone of Rolex Caliber 3131 drives the timekeeping at 28,800 vibrations per hour with a 48-hour power reserve, and the movement sits inside a soft-iron Faraday cage that resists magnetic interference. The green-tinted sapphire crystal and the orange lightning-bolt seconds hand match the genuine 116400GV. The watch ships from a top-tier specialist factory with a full quality control pass, insured worldwide delivery, and a 1-year limited warranty.
| Reference |
116400GV |
| Case |
40mm × 13.0mm, stainless steel |
| Dial |
Z-blue electric blue with luminous markers |
| Movement |
Swiss-grade Caliber 3131 clone, automatic |
| Power Reserve |
48 hours |
| Frequency |
28,800 vph (4 Hz) |
| Water Res. |
100 meters |
| Crystal |
Green-tinted sapphire, anti-reflective coating |
| Bezel |
Smooth polished steel, no insert |
| Bracelet |
Oyster, three-piece links, Oysterclasp |
| Functions |
Hours, minutes, seconds |
| Anti-Magnetic |
Soft-iron Faraday cage, resists 1,000 gauss |
-


$ 1,299
The Rolex Milgauss 116400GV-0002 super clone features the 40mm Oystersteel anti-magnetic watch paired with the electric Z-blue dial and the green-tinted sapphire crystal, finished to 98% visual and dimensional parity with the genuine reference. This 116400GV Super Clone carries the orange lightning-bolt seconds hand, a smooth polished bezel, and the three-link Oyster bracelet, priced at $1,399 against a genuine retail near $9,150.
This steel Milgauss Super Clone uses a polished and brushed Oystersteel case, a domed green sapphire crystal that Rolex makes scratch and fade resistant, and an Oyster bracelet with a folding Oysterclasp. A Swiss-grade clone of Rolex Caliber 3131 drives the watch at 28,800 vibrations per hour with a 48-hour power reserve. A soft-iron Faraday shield protects the movement against magnetic fields up to 1,000 gauss. The watch ships from a top-tier specialist factory with a full quality control pass, insured worldwide delivery, and a 1-year limited warranty.
| Reference |
116400GV-0002 |
| Case |
40mm × 13.0mm, Oystersteel |
| Dial |
Electric Z-blue with luminous markers |
| Movement |
Swiss-grade Caliber 3131 clone, automatic |
| Power Reserve |
48 hours |
| Frequency |
28,800 vph (4 Hz) |
| Water Res. |
100 meters |
| Crystal |
Green-tinted sapphire, anti-reflective coating |
| Bezel |
Smooth polished Oystersteel, fixed |
| Bracelet |
Oyster, three-piece links, Oysterclasp |
| Functions |
Hours, minutes, seconds |
| Magnetic Resistance |
1,000 gauss, soft-iron Faraday shield |
-


$ 1,299
The Rolex Oyster Day-Date 40 228206 super clone features the 40mm platinum President model paired with the ice blue dial reserved for the platinum reference, finished to 98% visual and dimensional parity with the genuine watch. This 228206 Super Clone carries applied Roman numerals, a smooth domed bezel, and the spelled-out day window at 12 oclock, priced at $1,699 against a genuine retail near $80,000.
This platinum Day-Date 40 Super Clone uses a polished platinum-tone case, a smooth domed bezel that sets the platinum reference apart from the fluted gold versions, and a three-piece-link President bracelet with a concealed Crownclasp. A Swiss-grade clone of Rolex Caliber 3255 drives the movement at 28,800 vibrations per hour with a 70-hour power reserve. The watch ships from a top-tier specialist factory with a full quality control pass, insured worldwide delivery, and a 1-year limited warranty.
| Reference |
228206 |
| Case |
40mm × 12mm, 950 platinum-tone |
| Dial |
Ice blue with applied platinum-tone Roman numerals |
| Movement |
Swiss-grade Caliber 3255 clone, automatic |
| Power Reserve |
70 hours |
| Frequency |
28,800 vph (4 Hz) |
| Water Res. |
100 meters |
| Crystal |
Sapphire with Cyclops date lens |
| Bezel |
Smooth, domed, platinum-tone |
| Bracelet |
President, three-piece links, concealed Crownclasp |
| Functions |
Hours, minutes, seconds, instantaneous day, date |
-


$ 1,299
The Rolex Oyster Perpetual 114200 super clone delivers the 34mm classic-Rolex silhouette in 904L stainless steel, finished to 98% visual parity with the genuine reference. Every smooth domed bezel curve, applied index marker, and Mercedes hand placement on the glossy black dial holds the geometry of the original. The watch carries a Swiss-grade automatic clone of the Rolex Caliber 3130 inside a Twinlock screw-down case, and ships for $1,299 against a $5,000 to $8,000 secondary-market range for the authentic 114200.
This 1:1 Rolex Oyster Perpetual 114200 super clone uses a 904L Oystersteel-grade case at 34mm wide and 12mm thick, a glossy black dial with luminous applied indexes, and a 3-link Oyster bracelet with Oysterclasp and Easylink 5mm comfort extension. The watch ships from a verified partner factory after a 4-stage QC pass, with insured worldwide delivery and a 1-year limited warranty.
Reference
114200
Case
34mm × 12mm, 904L stainless steel
Dial
Glossy black with luminous applied indexes
Movement
Swiss-grade automatic clone of Caliber 3130
Power Reserve
48 hours
Frequency
28,800 vph (4 Hz)
Water Res.
100 meters
Crystal
Sapphire, scratch-resistant
Bezel
Smooth domed, polished steel
Bracelet
3-link Oyster, 19mm at lugs tapering to 14mm
Functions
Hours, minutes, seconds
Crown
Twinlock screw-down, Rolex coronet engraved
Clasp
Oysterclasp folding with Easylink 5mm extension
Popular Rolex Styles
Our collection may include a range of Rolex inspired styles, depending on current availability.
Classic Rolex Styles
A good choice for customers who prefer a clean and timeless look that works well with different outfits.
Rolex Sports Styles
Sportier designs offer a stronger presence on the wrist and are popular with customers who prefer a more casual appearance.
Rolex GMT Styles
GMT inspired designs are a popular choice for customers who like watches with a travel focused appearance.
Rolex Dive Styles
Dive inspired designs are known for their strong and practical look and are a popular option for everyday wear.
Rolex Super Clone Watches at EliteWatches
We understand that choosing a watch online is not only about appearance.
Customers also want to know about the movement, size, finishing, available version, and other product details.
That is why we aim to provide useful information on each product page so you can compare your options before making a decision.
If you are comparing two Rolex Replica Watches, take a look at their individual specifications and available features rather than choosing based on appearance alone.
Shop Rolex Replica Watches
Browse our available Rolex Replica Watches and compare different designs, sizes, and product specifications.
If you are not sure which model is right for you, contact our team and we will be happy to help with product information.
Explore Rolex Replica Watches at EliteWatches and find a style that fits you.