Richard Mille RM 70-01 Super Clone: Tourbillon Alain Prost Cycling Edition
$ 1,799The Richard Mille RM 70-01 super clone follows the Alain Prost cyclist’s tonneau wristwatch, built around an asymmetric 50.23mm by 47.78mm case in grade 5 titanium and Carbon TPT, finished to 98% visual and dimensional parity with the 30-piece limited edition. This RM 70-01 Super Clone carries a hand-wound skeleton mechanical clone movement with a tourbillon-style cage at 6 o’clock, an odometer-style mileage counter at 12 o’clock, and a power reserve of approximately 70 hours, priced at $1,799 against a genuine market figure above $810,000.
This Alain Prost cycling tonneau super clone uses an angled, ergonomic case shape that Richard Mille engineered for in-saddle wrist viewing, with the dial pitched toward the rider on the drops. The case spans 50.23mm long, 47.78mm wide, and 15.83mm thick, with six titanium spline screws anchoring the bezel and a Carbon TPT lower section paired with a grade 5 titanium upper. The skeletonised dial shows the movement bridges and the tourbillon cage at 6 o’clock, with applied “Alain Prost” branding at 9 o’clock and an applied “Richard Mille” signature on the upper bridge. The odometer module at 12 o’clock follows the layout of the genuine integrated mileage counter, with a crown-mounted reset pusher on the case flank. The hand-wound skeleton mechanical clone movement runs at 21,600 vibrations per hour and holds a power reserve of approximately 70 hours, with grade 5 titanium baseplate and bridges, the same construction logic the genuine RM 70-01 caliber uses for shock resistance and weight reduction. The watch ships from a top-tier specialist factory that produces the complete watch, with a full quality control pass, insured worldwide delivery, and a 1-year limited warranty.
| Reference | RM 70-01 Tourbillon Alain Prost |
|---|---|
| Case | 50.23mm x 47.78mm asymmetric tonneau, grade 5 titanium and Carbon TPT |
| Dial | Skeletonised with tourbillon-style cage at 6 and odometer counter at 12 |
| Movement | Swiss-grade RM 70-01 clone, hand-wound skeleton mechanical |
|---|---|
| Power Reserve | Approximately 70 hours |
| Frequency | 21,600 vph (3 Hz) |
| Water Res. | 50 meters |
| Crystal | Sapphire with anti-reflective coating, sapphire caseback |
| Bezel | Carbon TPT with six titanium spline screws |
| Functions | Hours, minutes, decorative tourbillon-style cage, decorative mileage counter |
| Case Height | 15.83mm |
| Crown | Angled at 4 o’clock with mileage counter reset pusher |
| Strap | Black rubber with titanium deployant buckle |

