Richard Mille RM 055 Super Clone Bubba Watson: Standard White ATZ Ceramic
The Richard Mille RM 055 Bubba Watson super clone arrives in the standard catalogue configuration with a white ATZ ceramic tonneau case, a grade 5 titanium caseband, a fully skeletonised dial, and a white rubber strap, all rendered at 98% visual and dimensional parity to the genuine reference. This headline RM 055 listing carries a hand-wound mechanical clone of the RMUL2 caliber with a 55-hour power reserve, sells at $1,799, and compares to a six-figure secondary-market figure on the original.
$ 1,799
4-Stage QC
Verified factory
Insured Shipping
DHL · FedEx · 5–10 days
1-Year Warranty
Parts + servicing
Discreet Packaging
Signature required
SSL Secure
Description
Richard Mille RM 055 Super Clone Bubba Watson: Standard White ATZ Ceramic Overview
The Richard Mille RM 055 in standard white ATZ ceramic is the canonical Bubba Watson tonneau, the configuration that defined the reference at launch and continues to set the visual benchmark for the RM 055 family. This super clone holds the headline production specification on every measurable surface: the 49.94mm by 42.70mm tonneau case, the white ATZ ceramic bezel and caseback ring, the grade 5 titanium central band, the six titanium spline screws, the fully skeletonised dial with the upper-bridge “Richard Mille” signature, and the white rubber strap with titanium deployant buckle. The price of $1,799 places this canonical Bubba Watson configuration within reach of buyers who want the original signature variant of the RM 055 rather than a colour or material derivative.
Case & Crystal
Tonneau Case Geometry 49.94mm by 42.70mm by 13.05mm
The RM 055 Super Clone case follows the signature Richard Mille tonneau silhouette, with vertical lines that curve outward through the mid-case and pinch back in at the integrated lugs. Total dimensions land at 49.94mm long, 42.70mm wide, and 13.05mm thick, the canonical measurements that the genuine Bubba Watson reference established in 2010. The case sandwich uses a tri-component construction: a white ATZ ceramic upper bezel, a grade 5 titanium central caseband, and a matching ceramic caseback ring, with six titanium spline screws holding the assembly under torque. The crown sits at 2 o’clock in the signature Richard Mille position, machined from titanium with the RM cross-logo pattern, and screws down to seal the watch to 50 meters.
White ATZ Ceramic Bezel and Grade 5 Titanium Caseband
The white ATZ ceramic surface gives this Bubba Watson Super Clone its headline visual identity. ATZ, short for alumina-toughened zirconia, sits among the hardest engineered ceramics in watchmaking and holds its bright matte white finish through years of daily wear without yellowing, scratching, or surface fade. The grade 5 titanium caseband carries the structural load of the case, keeps total wrist weight under 100 grams, and gives the watch the thermal-neutral feel buyers expect from a genuine Richard Mille sports reference. The polished spline-screw heads ring the bezel and tie into the engineered industrial look of the RM 055.
Sapphire Crystal, Sapphire Caseback and 50-Meter Sealing
A curved sapphire crystal with anti-reflective coating covers the skeletonised dial and follows the tonneau profile from edge to edge, holding clarity at every viewing angle. The sapphire caseback opens a full view onto the hand-wound skeleton clone movement, the satin-finished bridges, and the mainspring barrel. The screw-down crown at 2 o’clock, combined with the gasket-sealed caseback, holds the RM 055 to 50 meters of water resistance for daily wear, hand washing, and light water contact during sport use.
Dial & Markers
Fully Skeletonised Dial with Open Bridge Architecture
The RM 055 dial is fully skeletonised: no dial plate covers the movement, and the buyer reads the time through the open architecture of the satin-finished titanium bridges below. The bridge cut-outs follow the canonical Richard Mille geometry, with the upper bridge carrying the applied “Richard Mille” branding in raised metal lettering and the lower bridges framing the gear train and the mainspring barrel. This Bubba Watson Super Clone matches the bridge silhouettes, the chamfered edges, and the satin surface finish of the genuine white ceramic production.
Applied “Richard Mille” Branding and Skeletonised Hands
The upper bridge carries the applied “Richard Mille” wordmark in raised metal, the canonical brand signature of the reference. Skeleton hour and minute hands run in baton form with hollow centres for visual continuity with the open dial, and the central seconds hand carries the same skeletonised geometry. The chapter ring around the outer edge holds a printed minute track, and the applied hour markers are positioned at the 12, 3, 6, and 9 positions to anchor the time reading against the open bridges underneath.
Tonneau Display Real Estate and Daily Legibility
The vertical tonneau case shape extends the dial area along its longer axis, which gives the skeletonised architecture more visible real estate than a comparable round dial. Skeleton hands and applied markers stay legible against the satin bridges through metal-on-metal contrast, and the curved sapphire crystal holds clarity from straight-on, off-axis, and overhead viewing. The white ATZ ceramic bezel frames the dial without colour bleed, so the buyer’s eye reads the movement architecture as the primary visual focus.
Movement & Specifications
Swiss-Grade RMUL2 Clone Hand-Wound Skeleton Mechanical Caliber
The Richard Mille RM 055 Super Clone runs on a Swiss-grade hand-wound mechanical movement engineered as a 1:1 clone of the genuine Richard Mille RMUL2 caliber. The movement winds by hand through the screw-down crown, drives the hours, minutes, and central seconds, and holds a power reserve of approximately 55 hours for over two days of autonomy off the wrist. The architecture mirrors the genuine RMUL2: a grade 5 titanium baseplate and bridges, a free-sprung balance, and a fully skeletonised layout that exposes the gear train and mainspring barrel through the front and the caseback. The 21,600 vibrations per hour frequency gives the central seconds hand the deliberate sweep that buyers associate with hand-wound Richard Mille sports calibers.
Accuracy, Shock Resistance and Wrist Performance
Daily deviation holds within -5 to +8 seconds per day after factory regulation, which lands close to the chronometer band that hand-wound Richard Mille buyers expect. The grade 5 titanium baseplate and bridges give the movement a strong, light, shock-resistant core, the same architectural reasoning Richard Mille applied to the genuine RMUL2 for use during golf swings, racket sport, and other high-impact wrist activity. The screw-down crown at 2 o’clock and the gasket-sealed caseback hold the 50-meter water rating through daily wear, hand washing, and light water exposure, in line with the Bubba Watson signature reference and its golf-course origin.
Spec grid:
Strap & Clasp
White Rubber Strap and Titanium Deployant Buckle
The standard Bubba Watson Super Clone ships on the canonical white rubber strap, the strap configuration Richard Mille pairs with the white ceramic production at launch. The strap uses a soft, flexible high-grade rubber compound that holds its shape across long-term wear, resists yellowing, and integrates cleanly into the tonneau case lugs for the continuous Richard Mille silhouette from 12 o’clock through 6 o’clock. A titanium deployant buckle closes flat against the wrist for a secure hold, lets the buyer put the watch on and take it off without flexing the rubber repeatedly, and adds a clean structural finish on the underside of the wrist.
Wrist Feel, Sizing and Daily Comfort
Total weight on the wrist lands at approximately 95 grams with the strap fitted, light for a watch of this case size and a direct result of the ceramic-and-titanium construction. The 49.94mm by 42.70mm tonneau case wears closer to a 44mm round watch on the wrist because the curved geometry follows the wrist line and the 13.05mm height clears most shirt cuffs without binding. The RM 055 Super Clone fits wrists from 6.5 inches through 8.25 inches through the deployant adjustment range, and the rubber strap softens to body temperature within a few minutes of putting the watch on.
Tonneau Case Geometry 49.94mm by 42.70mm by 13.05mm
The RM 055 Super Clone case follows the signature Richard Mille tonneau silhouette, with vertical lines that curve outward through the mid-case and pinch back in at the integrated lugs. Total dimensions land at 49.94mm long, 42.70mm wide, and 13.05mm thick, the canonical measurements that the genuine Bubba Watson reference established in 2010. The case sandwich uses a tri-component construction: a white ATZ ceramic upper bezel, a grade 5 titanium central caseband, and a matching ceramic caseback ring, with six titanium spline screws holding the assembly under torque. The crown sits at 2 o’clock in the signature Richard Mille position, machined from titanium with the RM cross-logo pattern, and screws down to seal the watch to 50 meters.
White ATZ Ceramic Bezel and Grade 5 Titanium Caseband
The white ATZ ceramic surface gives this Bubba Watson Super Clone its headline visual identity. ATZ, short for alumina-toughened zirconia, sits among the hardest engineered ceramics in watchmaking and holds its bright matte white finish through years of daily wear without yellowing, scratching, or surface fade. The grade 5 titanium caseband carries the structural load of the case, keeps total wrist weight under 100 grams, and gives the watch the thermal-neutral feel buyers expect from a genuine Richard Mille sports reference. The polished spline-screw heads ring the bezel and tie into the engineered industrial look of the RM 055.
Sapphire Crystal, Sapphire Caseback and 50-Meter Sealing
A curved sapphire crystal with anti-reflective coating covers the skeletonised dial and follows the tonneau profile from edge to edge, holding clarity at every viewing angle. The sapphire caseback opens a full view onto the hand-wound skeleton clone movement, the satin-finished bridges, and the mainspring barrel. The screw-down crown at 2 o’clock, combined with the gasket-sealed caseback, holds the RM 055 to 50 meters of water resistance for daily wear, hand washing, and light water contact during sport use.
Fully Skeletonised Dial with Open Bridge Architecture
The RM 055 dial is fully skeletonised: no dial plate covers the movement, and the buyer reads the time through the open architecture of the satin-finished titanium bridges below. The bridge cut-outs follow the canonical Richard Mille geometry, with the upper bridge carrying the applied “Richard Mille” branding in raised metal lettering and the lower bridges framing the gear train and the mainspring barrel. This Bubba Watson Super Clone matches the bridge silhouettes, the chamfered edges, and the satin surface finish of the genuine white ceramic production.
Applied “Richard Mille” Branding and Skeletonised Hands
The upper bridge carries the applied “Richard Mille” wordmark in raised metal, the canonical brand signature of the reference. Skeleton hour and minute hands run in baton form with hollow centres for visual continuity with the open dial, and the central seconds hand carries the same skeletonised geometry. The chapter ring around the outer edge holds a printed minute track, and the applied hour markers are positioned at the 12, 3, 6, and 9 positions to anchor the time reading against the open bridges underneath.
Tonneau Display Real Estate and Daily Legibility
The vertical tonneau case shape extends the dial area along its longer axis, which gives the skeletonised architecture more visible real estate than a comparable round dial. Skeleton hands and applied markers stay legible against the satin bridges through metal-on-metal contrast, and the curved sapphire crystal holds clarity from straight-on, off-axis, and overhead viewing. The white ATZ ceramic bezel frames the dial without colour bleed, so the buyer’s eye reads the movement architecture as the primary visual focus.
Swiss-Grade RMUL2 Clone Hand-Wound Skeleton Mechanical Caliber
The Richard Mille RM 055 Super Clone runs on a Swiss-grade hand-wound mechanical movement engineered as a 1:1 clone of the genuine Richard Mille RMUL2 caliber. The movement winds by hand through the screw-down crown, drives the hours, minutes, and central seconds, and holds a power reserve of approximately 55 hours for over two days of autonomy off the wrist. The architecture mirrors the genuine RMUL2: a grade 5 titanium baseplate and bridges, a free-sprung balance, and a fully skeletonised layout that exposes the gear train and mainspring barrel through the front and the caseback. The 21,600 vibrations per hour frequency gives the central seconds hand the deliberate sweep that buyers associate with hand-wound Richard Mille sports calibers.
Accuracy, Shock Resistance and Wrist Performance
Daily deviation holds within -5 to +8 seconds per day after factory regulation, which lands close to the chronometer band that hand-wound Richard Mille buyers expect. The grade 5 titanium baseplate and bridges give the movement a strong, light, shock-resistant core, the same architectural reasoning Richard Mille applied to the genuine RMUL2 for use during golf swings, racket sport, and other high-impact wrist activity. The screw-down crown at 2 o’clock and the gasket-sealed caseback hold the 50-meter water rating through daily wear, hand washing, and light water exposure, in line with the Bubba Watson signature reference and its golf-course origin.
Spec grid:
White Rubber Strap and Titanium Deployant Buckle
The standard Bubba Watson Super Clone ships on the canonical white rubber strap, the strap configuration Richard Mille pairs with the white ceramic production at launch. The strap uses a soft, flexible high-grade rubber compound that holds its shape across long-term wear, resists yellowing, and integrates cleanly into the tonneau case lugs for the continuous Richard Mille silhouette from 12 o’clock through 6 o’clock. A titanium deployant buckle closes flat against the wrist for a secure hold, lets the buyer put the watch on and take it off without flexing the rubber repeatedly, and adds a clean structural finish on the underside of the wrist.
Wrist Feel, Sizing and Daily Comfort
Total weight on the wrist lands at approximately 95 grams with the strap fitted, light for a watch of this case size and a direct result of the ceramic-and-titanium construction. The 49.94mm by 42.70mm tonneau case wears closer to a 44mm round watch on the wrist because the curved geometry follows the wrist line and the 13.05mm height clears most shirt cuffs without binding. The RM 055 Super Clone fits wrists from 6.5 inches through 8.25 inches through the deployant adjustment range, and the rubber strap softens to body temperature within a few minutes of putting the watch on.
Case & Crystal
Tonneau Case Geometry 49.94mm by 42.70mm by 13.05mm
The RM 055 Super Clone case follows the signature Richard Mille tonneau silhouette, with vertical lines that curve outward through the mid-case and pinch back in at the integrated lugs. Total dimensions land at 49.94mm long, 42.70mm wide, and 13.05mm thick, the canonical measurements that the genuine Bubba Watson reference established in 2010. The case sandwich uses a tri-component construction: a white ATZ ceramic upper bezel, a grade 5 titanium central caseband, and a matching ceramic caseback ring, with six titanium spline screws holding the assembly under torque. The crown sits at 2 o’clock in the signature Richard Mille position, machined from titanium with the RM cross-logo pattern, and screws down to seal the watch to 50 meters.
White ATZ Ceramic Bezel and Grade 5 Titanium Caseband
The white ATZ ceramic surface gives this Bubba Watson Super Clone its headline visual identity. ATZ, short for alumina-toughened zirconia, sits among the hardest engineered ceramics in watchmaking and holds its bright matte white finish through years of daily wear without yellowing, scratching, or surface fade. The grade 5 titanium caseband carries the structural load of the case, keeps total wrist weight under 100 grams, and gives the watch the thermal-neutral feel buyers expect from a genuine Richard Mille sports reference. The polished spline-screw heads ring the bezel and tie into the engineered industrial look of the RM 055.
Sapphire Crystal, Sapphire Caseback and 50-Meter Sealing
A curved sapphire crystal with anti-reflective coating covers the skeletonised dial and follows the tonneau profile from edge to edge, holding clarity at every viewing angle. The sapphire caseback opens a full view onto the hand-wound skeleton clone movement, the satin-finished bridges, and the mainspring barrel. The screw-down crown at 2 o’clock, combined with the gasket-sealed caseback, holds the RM 055 to 50 meters of water resistance for daily wear, hand washing, and light water contact during sport use.
Dial & Markers
Fully Skeletonised Dial with Open Bridge Architecture
The RM 055 dial is fully skeletonised: no dial plate covers the movement, and the buyer reads the time through the open architecture of the satin-finished titanium bridges below. The bridge cut-outs follow the canonical Richard Mille geometry, with the upper bridge carrying the applied “Richard Mille” branding in raised metal lettering and the lower bridges framing the gear train and the mainspring barrel. This Bubba Watson Super Clone matches the bridge silhouettes, the chamfered edges, and the satin surface finish of the genuine white ceramic production.
Applied “Richard Mille” Branding and Skeletonised Hands
The upper bridge carries the applied “Richard Mille” wordmark in raised metal, the canonical brand signature of the reference. Skeleton hour and minute hands run in baton form with hollow centres for visual continuity with the open dial, and the central seconds hand carries the same skeletonised geometry. The chapter ring around the outer edge holds a printed minute track, and the applied hour markers are positioned at the 12, 3, 6, and 9 positions to anchor the time reading against the open bridges underneath.
Tonneau Display Real Estate and Daily Legibility
The vertical tonneau case shape extends the dial area along its longer axis, which gives the skeletonised architecture more visible real estate than a comparable round dial. Skeleton hands and applied markers stay legible against the satin bridges through metal-on-metal contrast, and the curved sapphire crystal holds clarity from straight-on, off-axis, and overhead viewing. The white ATZ ceramic bezel frames the dial without colour bleed, so the buyer’s eye reads the movement architecture as the primary visual focus.
Movement & Specifications
Swiss-Grade RMUL2 Clone Hand-Wound Skeleton Mechanical Caliber
The Richard Mille RM 055 Super Clone runs on a Swiss-grade hand-wound mechanical movement engineered as a 1:1 clone of the genuine Richard Mille RMUL2 caliber. The movement winds by hand through the screw-down crown, drives the hours, minutes, and central seconds, and holds a power reserve of approximately 55 hours for over two days of autonomy off the wrist. The architecture mirrors the genuine RMUL2: a grade 5 titanium baseplate and bridges, a free-sprung balance, and a fully skeletonised layout that exposes the gear train and mainspring barrel through the front and the caseback. The 21,600 vibrations per hour frequency gives the central seconds hand the deliberate sweep that buyers associate with hand-wound Richard Mille sports calibers.
Accuracy, Shock Resistance and Wrist Performance
Daily deviation holds within -5 to +8 seconds per day after factory regulation, which lands close to the chronometer band that hand-wound Richard Mille buyers expect. The grade 5 titanium baseplate and bridges give the movement a strong, light, shock-resistant core, the same architectural reasoning Richard Mille applied to the genuine RMUL2 for use during golf swings, racket sport, and other high-impact wrist activity. The screw-down crown at 2 o’clock and the gasket-sealed caseback hold the 50-meter water rating through daily wear, hand washing, and light water exposure, in line with the Bubba Watson signature reference and its golf-course origin.
Spec grid:
Strap & Clasp
White Rubber Strap and Titanium Deployant Buckle
The standard Bubba Watson Super Clone ships on the canonical white rubber strap, the strap configuration Richard Mille pairs with the white ceramic production at launch. The strap uses a soft, flexible high-grade rubber compound that holds its shape across long-term wear, resists yellowing, and integrates cleanly into the tonneau case lugs for the continuous Richard Mille silhouette from 12 o’clock through 6 o’clock. A titanium deployant buckle closes flat against the wrist for a secure hold, lets the buyer put the watch on and take it off without flexing the rubber repeatedly, and adds a clean structural finish on the underside of the wrist.
Wrist Feel, Sizing and Daily Comfort
Total weight on the wrist lands at approximately 95 grams with the strap fitted, light for a watch of this case size and a direct result of the ceramic-and-titanium construction. The 49.94mm by 42.70mm tonneau case wears closer to a 44mm round watch on the wrist because the curved geometry follows the wrist line and the 13.05mm height clears most shirt cuffs without binding. The RM 055 Super Clone fits wrists from 6.5 inches through 8.25 inches through the deployant adjustment range, and the rubber strap softens to body temperature within a few minutes of putting the watch on.
OUR QUALITY PROMISE
Quality Checks Before Shipping
Every timepiece deserves careful attention before it reaches you. Before dispatch, each watch undergoes a visual inspection to review its overall appearance, finishing, and key components.
Visual Inspection
Checking the overall appearance, dial and finishing.
Component Review
Reviewing hands, case, bracelet and clasp.
Final Review
A final check before careful packaging and dispatch.
THE ELITE EXPERIENCE
A Better Way to Shop for Timepieces
Enjoy a more reassuring shopping experience with thoughtful service, added protection and convenient delivery with every order.
1-Year Warranty
Added peace of mind with 1-year warranty coverage.
Free Shipping
Complimentary shipping on your order.
Careful Packaging
Carefully packed to help protect your order during transit.






