Richard Mille RM 055 Super Clone: Bubba Watson White Sapphire Skeleton Dial

The Richard Mille RM055 Super Clone delivers the Bubba Watson tonneau identity in a white ATZ ceramic case with clear sapphire crystal accents framing the skeletonised dial, finished to 98% visual and dimensional parity with the genuine reference. This White Sapphire build pairs the RMUL2 clone hand-wound mechanical movement with a white rubber strap and titanium deployant buckle, priced at $2,000 against a genuine market figure above $135,000.

$ 2,000

4-Stage QC

Verified factory

Insured Shipping

DHL · FedEx · 5–10 days

1-Year Warranty

Parts + servicing

Discreet Packaging

Signature required

SSL Secure

Description

Richard Mille RM 055 Super Clone: Bubba Watson White Sapphire Skeleton Dial Overview

The Richard Mille RM 055 is the Bubba Watson signature tonneau sports watch, built here with a white ATZ ceramic case, clear sapphire crystal framing, a grade 5 titanium caseband, and a skeletonised dial reading against white-toned bridges. This super clone tracks the RM 055 reference through a 49.94mm by 42.70mm case, six titanium spline screws, and a white rubber strap with a titanium deployant buckle for $2,000. The tonneau geometry, the bridge layout under the skeleton dial, the sapphire accent rings, and the case finish follow the genuine reference within tight production tolerance.

Case & Crystal

Tonneau Case Profile and Sapphire Framing 49.94mm White ATZ Ceramic Build

The RM 055 White Sapphire super clone carries a tonneau case measuring 49.94mm long by 42.70mm wide and 13.05mm thick, machined to the curved Richard Mille silhouette that the Bubba Watson reference defined. White ATZ ceramic forms the primary upper case, and clear sapphire crystal framing opens the bezel and accent rings to let light pass through to the dial architecture. A grade 5 titanium caseband links the upper ceramic shell to the sapphire caseback ring, holding the structural rigidity of the build. Six polished titanium spline screws thread through the bezel and tie into the engineered visual language of the RM 055. The screw-down crown sits at 2 o’clock and seals the case for water resistance to 50 meters.

White ATZ Ceramic, Sapphire Crystal Accents and Grade 5 Titanium

The white ATZ ceramic upper case of the RM 055 White Sapphire build delivers a hard, scratch-resistant surface that holds its colour across long-term wear. ATZ ceramic, an alumina-toughened zirconia composite, sits among the hardest engineered materials used in modern watchmaking and gives the case the matte white finish buyers expect from the Bubba Watson reference. The clear sapphire crystal accents bring a transparent architectural layer that the standard white ceramic variant does not carry, which is the defining visual cue of this White Sapphire build. The grade 5 titanium caseband provides a strong, light core that keeps the watch under 100 grams on the rubber strap. This super clone follows the genuine ceramic-and-sapphire construction so the RM 055 reads correctly under close inspection on weight, surface texture, edge geometry, and light transmission.

Front Sapphire Crystal and Sapphire Caseback

Scratch-resistant sapphire crystal with anti-reflective coating covers the skeletonised dial and lets full light through to the open bridges and the gear train below. The curved front sapphire follows the tonneau profile and stays clear under angled light, which is a signature look of the RM 055 across every variant. The sapphire caseback shows the hand-wound clone movement from below, including the visible mainspring barrel, the train wheels, and the grade 5 titanium bridges. The screw-down crown at 2 o’clock supports the 50-meter water resistance of the reference through daily wear and hand washing contact.

Dial & Markers

Skeletonised Dial with Sapphire Accent Architecture

The skeletonised dial of this RM055 Super Clone shows the movement bridges, the mainspring barrel, and the gear train from the front, with no traditional dial plate covering the architecture. The clear sapphire accent framing extends the open visual language outward from the central dial, which gives the White Sapphire variant a stronger sense of depth than the all-ceramic interpretation of the same reference. The signature visual identity of every Richard Mille sports reference lives in this open architecture, and this super clone matches the bridge cut-out shape, the satin finishing on the white-toned bridges, and the layered transparency the genuine White Sapphire build delivers.

White-Toned Bridges, Applied Branding and Hand Set

The RM 055 White Sapphire carries white-toned bridges visible through the open dial, with the applied “Richard Mille” branding placed on the upper bridge in keeping with the maison’s signature dial layout. The skeleton hour and minute hands run in skeletonised baton form, matching the open dial language and giving a clear time reading against the bright bridge plates. A central seconds hand reads in the same skeleton style for visual consistency. The branding placement, the bridge finishing, and the hand profile follow the White Sapphire reference layout, including the upper-bridge logo position that collectors check first.

Tonneau Layout, Legibility and Light Play

The tonneau case shape extends the dial vertically, which gives the skeletonised display extra real estate for the visible movement architecture and the sapphire accent rings. The skeleton hour and minute hands stay legible against the white-toned bridges through the contrast between satin finishing and polished hand surfaces, and the printed minute track around the outer chapter ring supports precise reading. The sapphire framing lets ambient light pass through the case at angles that the opaque ceramic variants block, which gives the RM 055 White Sapphire a different wrist character through the day depending on the light source.

Movement & Specifications

Swiss-Grade RMUL2 Clone Hand-Wound Skeleton Movement

The Richard Mille RM 055 White Sapphire super clone runs on a Swiss-grade hand-wound mechanical movement engineered to match the genuine Richard Mille RMUL2 caliber in feel, frequency, and architecture. The movement operates at 21,600 vibrations per hour, winds by hand through the 2 o’clock crown, and holds a power reserve of approximately 55 hours, which covers over two days off the wrist. The caliber drives the central hours, minutes, and seconds across a grade 5 titanium baseplate and grade 5 titanium bridges, the same architectural choice the genuine RMUL2 uses for shock resistance and weight reduction across the sport-watch line.

Accuracy, Shock Resistance and Daily Performance

Daily deviation holds within -5 to +8 seconds per day after factory regulation on the RM055 Super Clone, close to the chronometer band that buyers expect from a Swiss-grade hand-wound build. The grade 5 titanium baseplate and bridges give the movement a strong, light core that handles shock during sport use, which is the architectural reasoning behind the genuine RMUL2 caliber. The 50-meter water resistance and the screw-down crown let the RM 055 White Sapphire hold its seal through daily wear, hand washing, and light water contact, in line with the active-wear positioning of the Bubba Watson reference. The skeleton bridge layout also helps the buyer monitor the mainspring barrel state at a glance, which is a practical advantage of a hand-wound build.

Spec grid:

TypeHand-wound mechanical, skeleton
Frequency21,600 vph (3 Hz)
Power ReserveApproximately 55 hours
BaseplateGrade 5 titanium
BridgesGrade 5 titanium, satin finished
FunctionsHours, minutes, seconds
Strap & Clasp

White Rubber Strap and Titanium Deployant Buckle

The RM 055 White Sapphire super clone carries a white rubber strap, the strap style Richard Mille pairs with the white-cased Bubba Watson references. The strap uses a soft, flexible rubber compound that holds its shape across long-term wear, with integrated lugs that flow into the tonneau case for the continuous Richard Mille silhouette. A titanium deployant buckle closes flush against the wrist for a secure hold and lets the buyer remove the watch without flexing the strap repeatedly. The titanium clasp matches the grade 5 caseband on tone and finish, which keeps the visual language consistent from case to wrist. The RM 055 uses the white rubber strap on this White Sapphire variant and not a metal bracelet.

Wrist Feel, Sizing and Comfort

The watch weighs approximately 92 grams on the full white rubber strap, which gives the RM 055 White Sapphire the light wrist presence buyers expect from a ceramic, sapphire, and titanium Richard Mille build. The 49.94mm by 42.70mm tonneau case wears closer to a 44mm round watch on the wrist due to the curved geometry, and the slim 13.05mm height clears most shirt cuffs without snagging. The Bubba Watson White Sapphire sits comfortably on wrists from 6.5 to 8 inches with the deployant buckle adjusted across the strap holes. The rubber strap also handles sweat and humid weather better than leather or fabric, which suits the active wear case the reference was designed for.

Tonneau Case Profile and Sapphire Framing 49.94mm White ATZ Ceramic Build

The RM 055 White Sapphire super clone carries a tonneau case measuring 49.94mm long by 42.70mm wide and 13.05mm thick, machined to the curved Richard Mille silhouette that the Bubba Watson reference defined. White ATZ ceramic forms the primary upper case, and clear sapphire crystal framing opens the bezel and accent rings to let light pass through to the dial architecture. A grade 5 titanium caseband links the upper ceramic shell to the sapphire caseback ring, holding the structural rigidity of the build. Six polished titanium spline screws thread through the bezel and tie into the engineered visual language of the RM 055. The screw-down crown sits at 2 o’clock and seals the case for water resistance to 50 meters.

White ATZ Ceramic, Sapphire Crystal Accents and Grade 5 Titanium

The white ATZ ceramic upper case of the RM 055 White Sapphire build delivers a hard, scratch-resistant surface that holds its colour across long-term wear. ATZ ceramic, an alumina-toughened zirconia composite, sits among the hardest engineered materials used in modern watchmaking and gives the case the matte white finish buyers expect from the Bubba Watson reference. The clear sapphire crystal accents bring a transparent architectural layer that the standard white ceramic variant does not carry, which is the defining visual cue of this White Sapphire build. The grade 5 titanium caseband provides a strong, light core that keeps the watch under 100 grams on the rubber strap. This super clone follows the genuine ceramic-and-sapphire construction so the RM 055 reads correctly under close inspection on weight, surface texture, edge geometry, and light transmission.

Front Sapphire Crystal and Sapphire Caseback

Scratch-resistant sapphire crystal with anti-reflective coating covers the skeletonised dial and lets full light through to the open bridges and the gear train below. The curved front sapphire follows the tonneau profile and stays clear under angled light, which is a signature look of the RM 055 across every variant. The sapphire caseback shows the hand-wound clone movement from below, including the visible mainspring barrel, the train wheels, and the grade 5 titanium bridges. The screw-down crown at 2 o’clock supports the 50-meter water resistance of the reference through daily wear and hand washing contact.

Skeletonised Dial with Sapphire Accent Architecture

The skeletonised dial of this RM055 Super Clone shows the movement bridges, the mainspring barrel, and the gear train from the front, with no traditional dial plate covering the architecture. The clear sapphire accent framing extends the open visual language outward from the central dial, which gives the White Sapphire variant a stronger sense of depth than the all-ceramic interpretation of the same reference. The signature visual identity of every Richard Mille sports reference lives in this open architecture, and this super clone matches the bridge cut-out shape, the satin finishing on the white-toned bridges, and the layered transparency the genuine White Sapphire build delivers.

White-Toned Bridges, Applied Branding and Hand Set

The RM 055 White Sapphire carries white-toned bridges visible through the open dial, with the applied “Richard Mille” branding placed on the upper bridge in keeping with the maison’s signature dial layout. The skeleton hour and minute hands run in skeletonised baton form, matching the open dial language and giving a clear time reading against the bright bridge plates. A central seconds hand reads in the same skeleton style for visual consistency. The branding placement, the bridge finishing, and the hand profile follow the White Sapphire reference layout, including the upper-bridge logo position that collectors check first.

Tonneau Layout, Legibility and Light Play

The tonneau case shape extends the dial vertically, which gives the skeletonised display extra real estate for the visible movement architecture and the sapphire accent rings. The skeleton hour and minute hands stay legible against the white-toned bridges through the contrast between satin finishing and polished hand surfaces, and the printed minute track around the outer chapter ring supports precise reading. The sapphire framing lets ambient light pass through the case at angles that the opaque ceramic variants block, which gives the RM 055 White Sapphire a different wrist character through the day depending on the light source.

Swiss-Grade RMUL2 Clone Hand-Wound Skeleton Movement

The Richard Mille RM 055 White Sapphire super clone runs on a Swiss-grade hand-wound mechanical movement engineered to match the genuine Richard Mille RMUL2 caliber in feel, frequency, and architecture. The movement operates at 21,600 vibrations per hour, winds by hand through the 2 o’clock crown, and holds a power reserve of approximately 55 hours, which covers over two days off the wrist. The caliber drives the central hours, minutes, and seconds across a grade 5 titanium baseplate and grade 5 titanium bridges, the same architectural choice the genuine RMUL2 uses for shock resistance and weight reduction across the sport-watch line.

Accuracy, Shock Resistance and Daily Performance

Daily deviation holds within -5 to +8 seconds per day after factory regulation on the RM055 Super Clone, close to the chronometer band that buyers expect from a Swiss-grade hand-wound build. The grade 5 titanium baseplate and bridges give the movement a strong, light core that handles shock during sport use, which is the architectural reasoning behind the genuine RMUL2 caliber. The 50-meter water resistance and the screw-down crown let the RM 055 White Sapphire hold its seal through daily wear, hand washing, and light water contact, in line with the active-wear positioning of the Bubba Watson reference. The skeleton bridge layout also helps the buyer monitor the mainspring barrel state at a glance, which is a practical advantage of a hand-wound build.

Spec grid:

TypeHand-wound mechanical, skeleton
Frequency21,600 vph (3 Hz)
Power ReserveApproximately 55 hours
BaseplateGrade 5 titanium
BridgesGrade 5 titanium, satin finished
FunctionsHours, minutes, seconds

White Rubber Strap and Titanium Deployant Buckle

The RM 055 White Sapphire super clone carries a white rubber strap, the strap style Richard Mille pairs with the white-cased Bubba Watson references. The strap uses a soft, flexible rubber compound that holds its shape across long-term wear, with integrated lugs that flow into the tonneau case for the continuous Richard Mille silhouette. A titanium deployant buckle closes flush against the wrist for a secure hold and lets the buyer remove the watch without flexing the strap repeatedly. The titanium clasp matches the grade 5 caseband on tone and finish, which keeps the visual language consistent from case to wrist. The RM 055 uses the white rubber strap on this White Sapphire variant and not a metal bracelet.

Wrist Feel, Sizing and Comfort

The watch weighs approximately 92 grams on the full white rubber strap, which gives the RM 055 White Sapphire the light wrist presence buyers expect from a ceramic, sapphire, and titanium Richard Mille build. The 49.94mm by 42.70mm tonneau case wears closer to a 44mm round watch on the wrist due to the curved geometry, and the slim 13.05mm height clears most shirt cuffs without snagging. The Bubba Watson White Sapphire sits comfortably on wrists from 6.5 to 8 inches with the deployant buckle adjusted across the strap holes. The rubber strap also handles sweat and humid weather better than leather or fabric, which suits the active wear case the reference was designed for.

Case & Crystal

Tonneau Case Profile and Sapphire Framing 49.94mm White ATZ Ceramic Build

The RM 055 White Sapphire super clone carries a tonneau case measuring 49.94mm long by 42.70mm wide and 13.05mm thick, machined to the curved Richard Mille silhouette that the Bubba Watson reference defined. White ATZ ceramic forms the primary upper case, and clear sapphire crystal framing opens the bezel and accent rings to let light pass through to the dial architecture. A grade 5 titanium caseband links the upper ceramic shell to the sapphire caseback ring, holding the structural rigidity of the build. Six polished titanium spline screws thread through the bezel and tie into the engineered visual language of the RM 055. The screw-down crown sits at 2 o’clock and seals the case for water resistance to 50 meters.

White ATZ Ceramic, Sapphire Crystal Accents and Grade 5 Titanium

The white ATZ ceramic upper case of the RM 055 White Sapphire build delivers a hard, scratch-resistant surface that holds its colour across long-term wear. ATZ ceramic, an alumina-toughened zirconia composite, sits among the hardest engineered materials used in modern watchmaking and gives the case the matte white finish buyers expect from the Bubba Watson reference. The clear sapphire crystal accents bring a transparent architectural layer that the standard white ceramic variant does not carry, which is the defining visual cue of this White Sapphire build. The grade 5 titanium caseband provides a strong, light core that keeps the watch under 100 grams on the rubber strap. This super clone follows the genuine ceramic-and-sapphire construction so the RM 055 reads correctly under close inspection on weight, surface texture, edge geometry, and light transmission.

Front Sapphire Crystal and Sapphire Caseback

Scratch-resistant sapphire crystal with anti-reflective coating covers the skeletonised dial and lets full light through to the open bridges and the gear train below. The curved front sapphire follows the tonneau profile and stays clear under angled light, which is a signature look of the RM 055 across every variant. The sapphire caseback shows the hand-wound clone movement from below, including the visible mainspring barrel, the train wheels, and the grade 5 titanium bridges. The screw-down crown at 2 o’clock supports the 50-meter water resistance of the reference through daily wear and hand washing contact.

Dial & Markers

Skeletonised Dial with Sapphire Accent Architecture

The skeletonised dial of this RM055 Super Clone shows the movement bridges, the mainspring barrel, and the gear train from the front, with no traditional dial plate covering the architecture. The clear sapphire accent framing extends the open visual language outward from the central dial, which gives the White Sapphire variant a stronger sense of depth than the all-ceramic interpretation of the same reference. The signature visual identity of every Richard Mille sports reference lives in this open architecture, and this super clone matches the bridge cut-out shape, the satin finishing on the white-toned bridges, and the layered transparency the genuine White Sapphire build delivers.

White-Toned Bridges, Applied Branding and Hand Set

The RM 055 White Sapphire carries white-toned bridges visible through the open dial, with the applied “Richard Mille” branding placed on the upper bridge in keeping with the maison’s signature dial layout. The skeleton hour and minute hands run in skeletonised baton form, matching the open dial language and giving a clear time reading against the bright bridge plates. A central seconds hand reads in the same skeleton style for visual consistency. The branding placement, the bridge finishing, and the hand profile follow the White Sapphire reference layout, including the upper-bridge logo position that collectors check first.

Tonneau Layout, Legibility and Light Play

The tonneau case shape extends the dial vertically, which gives the skeletonised display extra real estate for the visible movement architecture and the sapphire accent rings. The skeleton hour and minute hands stay legible against the white-toned bridges through the contrast between satin finishing and polished hand surfaces, and the printed minute track around the outer chapter ring supports precise reading. The sapphire framing lets ambient light pass through the case at angles that the opaque ceramic variants block, which gives the RM 055 White Sapphire a different wrist character through the day depending on the light source.

Movement & Specifications

Swiss-Grade RMUL2 Clone Hand-Wound Skeleton Movement

The Richard Mille RM 055 White Sapphire super clone runs on a Swiss-grade hand-wound mechanical movement engineered to match the genuine Richard Mille RMUL2 caliber in feel, frequency, and architecture. The movement operates at 21,600 vibrations per hour, winds by hand through the 2 o’clock crown, and holds a power reserve of approximately 55 hours, which covers over two days off the wrist. The caliber drives the central hours, minutes, and seconds across a grade 5 titanium baseplate and grade 5 titanium bridges, the same architectural choice the genuine RMUL2 uses for shock resistance and weight reduction across the sport-watch line.

Accuracy, Shock Resistance and Daily Performance

Daily deviation holds within -5 to +8 seconds per day after factory regulation on the RM055 Super Clone, close to the chronometer band that buyers expect from a Swiss-grade hand-wound build. The grade 5 titanium baseplate and bridges give the movement a strong, light core that handles shock during sport use, which is the architectural reasoning behind the genuine RMUL2 caliber. The 50-meter water resistance and the screw-down crown let the RM 055 White Sapphire hold its seal through daily wear, hand washing, and light water contact, in line with the active-wear positioning of the Bubba Watson reference. The skeleton bridge layout also helps the buyer monitor the mainspring barrel state at a glance, which is a practical advantage of a hand-wound build.

Spec grid:

TypeHand-wound mechanical, skeleton
Frequency21,600 vph (3 Hz)
Power ReserveApproximately 55 hours
BaseplateGrade 5 titanium
BridgesGrade 5 titanium, satin finished
FunctionsHours, minutes, seconds
Strap & Clasp

White Rubber Strap and Titanium Deployant Buckle

The RM 055 White Sapphire super clone carries a white rubber strap, the strap style Richard Mille pairs with the white-cased Bubba Watson references. The strap uses a soft, flexible rubber compound that holds its shape across long-term wear, with integrated lugs that flow into the tonneau case for the continuous Richard Mille silhouette. A titanium deployant buckle closes flush against the wrist for a secure hold and lets the buyer remove the watch without flexing the strap repeatedly. The titanium clasp matches the grade 5 caseband on tone and finish, which keeps the visual language consistent from case to wrist. The RM 055 uses the white rubber strap on this White Sapphire variant and not a metal bracelet.

Wrist Feel, Sizing and Comfort

The watch weighs approximately 92 grams on the full white rubber strap, which gives the RM 055 White Sapphire the light wrist presence buyers expect from a ceramic, sapphire, and titanium Richard Mille build. The 49.94mm by 42.70mm tonneau case wears closer to a 44mm round watch on the wrist due to the curved geometry, and the slim 13.05mm height clears most shirt cuffs without snagging. The Bubba Watson White Sapphire sits comfortably on wrists from 6.5 to 8 inches with the deployant buckle adjusted across the strap holes. The rubber strap also handles sweat and humid weather better than leather or fabric, which suits the active wear case the reference was designed for.

OUR QUALITY PROMISE

Quality Checks Before Shipping

Every timepiece deserves careful attention before it reaches you. Before dispatch, each watch undergoes a visual inspection to review its overall appearance, finishing, and key components.

Visual Inspection

Checking the overall appearance, dial and finishing.

Component Review

Reviewing hands, case, bracelet and clasp.

Final Review

A final check before careful packaging and dispatch.

shopping with confidence

THE ELITE EXPERIENCE

A Better Way to Shop for Timepieces

Enjoy a more reassuring shopping experience with thoughtful service, added protection and convenient delivery with every order.

1-Year Warranty

Added peace of mind with 1-year warranty coverage.

Free Shipping

Complimentary shipping on your order.

Careful Packaging

Carefully packed to help protect your order during transit.