Richard Mille RM 21-01 Super Clone : Tourbillon Aerodyne Carbon Honeycomb

The Richard Mille RM 21-01 super clone features the aviation-inspired Aerodyne tonneau case in Carbon TPT and grade 5 titanium with the signature honeycomb-pattern bezel and skeletonised aluminium-lithium honeycomb baseplate, finished to 98% visual and dimensional parity with the 50-piece genuine reference. The RM 21-01 Aerodyne Super Clone carries an automatic skeleton mechanical movement engineered to resemble the tourbillon architecture at 6 o’clock, priced at $2,000 against a genuine market figure above $1,000,000.

$ 2,000

4-Stage QC

Verified factory

Insured Shipping

DHL · FedEx · 5–10 days

1-Year Warranty

Parts + servicing

Discreet Packaging

Signature required

SSL Secure

Description

Richard Mille RM 21-01 Super Clone : Tourbillon Aerodyne Carbon Honeycomb Overview

The Richard Mille RM 21-01 Aerodyne is the aviation-inspired 50-piece limited tonneau tourbillon reference, built here with a Carbon TPT bezel, a grade 5 titanium caseband, a honeycomb-pattern surface signature, and a skeletonised dial that frames the aluminium-lithium honeycomb baseplate. This super clone follows the RM 21-01 reference with a 50.10mm by 42.70mm case, six titanium spline screws, a tourbillon-style display at 6 o’clock, and a black rubber strap with a titanium deployant buckle for $2,000. The tonneau geometry, the honeycomb texture across the bezel, the bridge architecture, and the case finishing track the genuine reference within tight production tolerance.

Case & Crystal

Tonneau Case, Honeycomb Bezel and Aerospace Profile — 50.10mm Carbon TPT Build

The Richard Mille RM 21-01 super clone carries a tonneau case measuring 50.10mm long by 42.70mm wide and 14.40mm thick, machined to the Aerodyne silhouette that the aviation-inspired 2021 release defined. The bezel uses Carbon TPT in the honeycomb pattern Richard Mille engineered as a direct visual tribute to aircraft fuselage skin construction. Six titanium spline screws lock the bezel to the caseband around the perimeter, a structural detail that ties the RM 21-01 to the wider Richard Mille tonneau family. The screw-down crown at 2 o’clock seals the case for water resistance to 50 meters.

Carbon TPT, Grade 5 Titanium and the Honeycomb Construction Detail

The Carbon TPT bezel of the RM 21-01 Aerodyne super clone delivers a layered carbon composite surface with the engineered honeycomb texture across the visible perimeter, paired with a grade 5 titanium caseband that holds the structural rigidity of the build. Carbon TPT, a thin-ply composite of carbon filaments suspended in matrix resin, ranks among the lightest and most rigid materials used in modern watchmaking and gives the bezel a striated dark finish under angled light. The grade 5 titanium caseband provides a strong, light core that keeps the watch under 95 grams on the rubber strap. This super clone follows the genuine Carbon-TPT-and-titanium construction so the RM 21-01 reads correctly under close inspection on weight, surface texture, and honeycomb relief.

Sapphire Crystal, Sapphire Caseback and Six Spline Screws

Scratch-resistant sapphire crystal with anti-reflective coating covers the skeletonised dial and lets the full visual depth of the honeycomb baseplate and titanium bridges read through to the wearer. The curved sapphire follows the tonneau profile and stays clear under angled light, in line with the Richard Mille sports aesthetic. The sapphire caseback shows the automatic skeleton clone movement from below, including the visible barrel and the bridge architecture, and the six titanium spline screws around the bezel match the genuine RM 21-01 fixing pattern.

Dial & Markers

Skeletonised Dial with Honeycomb Aluminium-Lithium Baseplate

The skeletonised dial of this RM 21-01 super clone reveals the honeycomb aluminium-lithium alloy baseplate, the titanium bridges, and the visible barrel from the front, with no traditional dial plate hiding the architecture. The honeycomb pattern carries through the visible baseplate, which is the visual signature that defines the Aerodyne theme of the reference. The open design lets the buyer read the time and the inner mechanics through the sapphire, and the colour palette stays in the engineered grey-and-black tones of the genuine production. This super clone matches the honeycomb cell layout, the satin finishing on the titanium bridges, and the open architecture of the genuine RM 21-01 Aerodyne dial.

Applied Richard Mille Branding and Tourbillon-Style Aperture at 6

The RM 21-01 carries applied “Richard Mille” branding on the upper bridge and a circular aperture at 6 o’clock that frames the tourbillon-style display, with white printed indices placed around the chapter ring for the hour reading. The skeleton hour and minute hands run in luminous-tipped baton form, matching the open dial language and giving a clear time reading against the honeycomb backdrop. The 6 o’clock aperture sits where the genuine RM 21-01 places its tourbillon cage and presents the same visual identity through the rotating element below. The branding placement, the printed indices, and the aperture geometry follow the limited-edition reference layout.

Tonneau Layout, Honeycomb Visual Identity and Legibility

The tonneau case shape extends the dial vertically, which gives the skeletonised display extra real estate for the honeycomb baseplate texture and the bridge architecture. The hour and minute hands stay legible against the visible movement through the luminous coating on the hand tips, and the chapter ring carries the printed indices around the outer edge for direct time reading. The honeycomb pattern, repeated across the bezel and the baseplate, locks the Aerodyne visual identity from the perimeter to the centre of the watch.

 

Movement & Specifications

Swiss-Grade Automatic Skeleton Clone with Tourbillon-Style Aperture

The Richard Mille RM 21-01 super clone runs on a Swiss-grade automatic mechanical skeleton movement engineered to resemble the architecture of the genuine Richard Mille RM 21-01 caliber, including the tourbillon-style aperture at 6 o’clock. The movement operates at 21,600 vibrations per hour, winds automatically through the rotor, and holds a power reserve of approximately 70 hours for nearly three days off the wrist. The caliber drives the central hours and minutes across a grade 5 titanium baseplate with the engineered honeycomb structure, the same architectural choice the genuine RM 21-01 uses for weight reduction and rigidity. The 6 o’clock aperture shows a rotating element engineered to mirror the visual presence of the genuine tourbillon cage rather than a true working tourbillon escapement, a distinction Super Clone Watches discloses for buyer transparency on this reference.

Accuracy, Shock Resistance and Daily Performance

Daily deviation holds within -5 to +8 seconds per day after factory regulation, close to the chronometer band that buyers expect from a Swiss-grade automatic build. The grade 5 titanium baseplate with the honeycomb structure gives the movement a strong, light core that handles shock during daily wear, which carries directly from the aerospace engineering reasoning behind the genuine RM 21-01. The 50-meter water resistance and the screw-down crown let the Aerodyne super clone hold its seal through daily wear, hand washing, and light water contact, in line with the active-luxury positioning of the reference.

Spec grid:

TypeAutomatic mechanical, skeleton, tourbillon-style display
Frequency21,600 vph (3 Hz)
Power ReserveApproximately 70 hours
BaseplateGrade 5 titanium with honeycomb structure
BridgesGrade 5 titanium, satin finished
FunctionsHours, minutes, tourbillon-style aperture at 6
Strap & Clasp

Black Rubber Strap and Titanium Deployant Buckle

The RM 21-01 super clone carries a black rubber strap with a titanium deployant buckle, the strap configuration Richard Mille pairs with the Aerodyne reference. The strap uses a soft, flexible rubber compound that holds its shape across long-term wear, with integrated lugs that flow into the tonneau case for the continuous Richard Mille silhouette. The titanium deployant buckle closes flush against the wrist for a secure hold and lets the buyer remove the watch without flexing the strap repeatedly. The Aerodyne uses the black rubber strap on this Carbon TPT variant and not a metal bracelet.

Wrist Feel, Sizing and Comfort

The watch weighs approximately 92 grams on the full black rubber strap, which gives the RM 21-01 the light wrist presence buyers expect from a Carbon-TPT-and-titanium Richard Mille build. The 50.10mm by 42.70mm tonneau case wears closer to a 44mm round watch on the wrist due to the curved tonneau geometry, and the 14.40mm height clears most shirt cuffs through the contoured profile. The Aerodyne super clone sits comfortably on wrists from 6.75 to 8.25 inches with the titanium deployant buckle adjusted across the strap holes.

 

Tonneau Case, Honeycomb Bezel and Aerospace Profile — 50.10mm Carbon TPT Build

The Richard Mille RM 21-01 super clone carries a tonneau case measuring 50.10mm long by 42.70mm wide and 14.40mm thick, machined to the Aerodyne silhouette that the aviation-inspired 2021 release defined. The bezel uses Carbon TPT in the honeycomb pattern Richard Mille engineered as a direct visual tribute to aircraft fuselage skin construction. Six titanium spline screws lock the bezel to the caseband around the perimeter, a structural detail that ties the RM 21-01 to the wider Richard Mille tonneau family. The screw-down crown at 2 o’clock seals the case for water resistance to 50 meters.

Carbon TPT, Grade 5 Titanium and the Honeycomb Construction Detail

The Carbon TPT bezel of the RM 21-01 Aerodyne super clone delivers a layered carbon composite surface with the engineered honeycomb texture across the visible perimeter, paired with a grade 5 titanium caseband that holds the structural rigidity of the build. Carbon TPT, a thin-ply composite of carbon filaments suspended in matrix resin, ranks among the lightest and most rigid materials used in modern watchmaking and gives the bezel a striated dark finish under angled light. The grade 5 titanium caseband provides a strong, light core that keeps the watch under 95 grams on the rubber strap. This super clone follows the genuine Carbon-TPT-and-titanium construction so the RM 21-01 reads correctly under close inspection on weight, surface texture, and honeycomb relief.

Sapphire Crystal, Sapphire Caseback and Six Spline Screws

Scratch-resistant sapphire crystal with anti-reflective coating covers the skeletonised dial and lets the full visual depth of the honeycomb baseplate and titanium bridges read through to the wearer. The curved sapphire follows the tonneau profile and stays clear under angled light, in line with the Richard Mille sports aesthetic. The sapphire caseback shows the automatic skeleton clone movement from below, including the visible barrel and the bridge architecture, and the six titanium spline screws around the bezel match the genuine RM 21-01 fixing pattern.

Skeletonised Dial with Honeycomb Aluminium-Lithium Baseplate

The skeletonised dial of this RM 21-01 super clone reveals the honeycomb aluminium-lithium alloy baseplate, the titanium bridges, and the visible barrel from the front, with no traditional dial plate hiding the architecture. The honeycomb pattern carries through the visible baseplate, which is the visual signature that defines the Aerodyne theme of the reference. The open design lets the buyer read the time and the inner mechanics through the sapphire, and the colour palette stays in the engineered grey-and-black tones of the genuine production. This super clone matches the honeycomb cell layout, the satin finishing on the titanium bridges, and the open architecture of the genuine RM 21-01 Aerodyne dial.

Applied Richard Mille Branding and Tourbillon-Style Aperture at 6

The RM 21-01 carries applied “Richard Mille” branding on the upper bridge and a circular aperture at 6 o’clock that frames the tourbillon-style display, with white printed indices placed around the chapter ring for the hour reading. The skeleton hour and minute hands run in luminous-tipped baton form, matching the open dial language and giving a clear time reading against the honeycomb backdrop. The 6 o’clock aperture sits where the genuine RM 21-01 places its tourbillon cage and presents the same visual identity through the rotating element below. The branding placement, the printed indices, and the aperture geometry follow the limited-edition reference layout.

Tonneau Layout, Honeycomb Visual Identity and Legibility

The tonneau case shape extends the dial vertically, which gives the skeletonised display extra real estate for the honeycomb baseplate texture and the bridge architecture. The hour and minute hands stay legible against the visible movement through the luminous coating on the hand tips, and the chapter ring carries the printed indices around the outer edge for direct time reading. The honeycomb pattern, repeated across the bezel and the baseplate, locks the Aerodyne visual identity from the perimeter to the centre of the watch.

 

Swiss-Grade Automatic Skeleton Clone with Tourbillon-Style Aperture

The Richard Mille RM 21-01 super clone runs on a Swiss-grade automatic mechanical skeleton movement engineered to resemble the architecture of the genuine Richard Mille RM 21-01 caliber, including the tourbillon-style aperture at 6 o’clock. The movement operates at 21,600 vibrations per hour, winds automatically through the rotor, and holds a power reserve of approximately 70 hours for nearly three days off the wrist. The caliber drives the central hours and minutes across a grade 5 titanium baseplate with the engineered honeycomb structure, the same architectural choice the genuine RM 21-01 uses for weight reduction and rigidity. The 6 o’clock aperture shows a rotating element engineered to mirror the visual presence of the genuine tourbillon cage rather than a true working tourbillon escapement, a distinction Super Clone Watches discloses for buyer transparency on this reference.

Accuracy, Shock Resistance and Daily Performance

Daily deviation holds within -5 to +8 seconds per day after factory regulation, close to the chronometer band that buyers expect from a Swiss-grade automatic build. The grade 5 titanium baseplate with the honeycomb structure gives the movement a strong, light core that handles shock during daily wear, which carries directly from the aerospace engineering reasoning behind the genuine RM 21-01. The 50-meter water resistance and the screw-down crown let the Aerodyne super clone hold its seal through daily wear, hand washing, and light water contact, in line with the active-luxury positioning of the reference.

Spec grid:

TypeAutomatic mechanical, skeleton, tourbillon-style display
Frequency21,600 vph (3 Hz)
Power ReserveApproximately 70 hours
BaseplateGrade 5 titanium with honeycomb structure
BridgesGrade 5 titanium, satin finished
FunctionsHours, minutes, tourbillon-style aperture at 6

Black Rubber Strap and Titanium Deployant Buckle

The RM 21-01 super clone carries a black rubber strap with a titanium deployant buckle, the strap configuration Richard Mille pairs with the Aerodyne reference. The strap uses a soft, flexible rubber compound that holds its shape across long-term wear, with integrated lugs that flow into the tonneau case for the continuous Richard Mille silhouette. The titanium deployant buckle closes flush against the wrist for a secure hold and lets the buyer remove the watch without flexing the strap repeatedly. The Aerodyne uses the black rubber strap on this Carbon TPT variant and not a metal bracelet.

Wrist Feel, Sizing and Comfort

The watch weighs approximately 92 grams on the full black rubber strap, which gives the RM 21-01 the light wrist presence buyers expect from a Carbon-TPT-and-titanium Richard Mille build. The 50.10mm by 42.70mm tonneau case wears closer to a 44mm round watch on the wrist due to the curved tonneau geometry, and the 14.40mm height clears most shirt cuffs through the contoured profile. The Aerodyne super clone sits comfortably on wrists from 6.75 to 8.25 inches with the titanium deployant buckle adjusted across the strap holes.

 

Case & Crystal

Tonneau Case, Honeycomb Bezel and Aerospace Profile — 50.10mm Carbon TPT Build

The Richard Mille RM 21-01 super clone carries a tonneau case measuring 50.10mm long by 42.70mm wide and 14.40mm thick, machined to the Aerodyne silhouette that the aviation-inspired 2021 release defined. The bezel uses Carbon TPT in the honeycomb pattern Richard Mille engineered as a direct visual tribute to aircraft fuselage skin construction. Six titanium spline screws lock the bezel to the caseband around the perimeter, a structural detail that ties the RM 21-01 to the wider Richard Mille tonneau family. The screw-down crown at 2 o’clock seals the case for water resistance to 50 meters.

Carbon TPT, Grade 5 Titanium and the Honeycomb Construction Detail

The Carbon TPT bezel of the RM 21-01 Aerodyne super clone delivers a layered carbon composite surface with the engineered honeycomb texture across the visible perimeter, paired with a grade 5 titanium caseband that holds the structural rigidity of the build. Carbon TPT, a thin-ply composite of carbon filaments suspended in matrix resin, ranks among the lightest and most rigid materials used in modern watchmaking and gives the bezel a striated dark finish under angled light. The grade 5 titanium caseband provides a strong, light core that keeps the watch under 95 grams on the rubber strap. This super clone follows the genuine Carbon-TPT-and-titanium construction so the RM 21-01 reads correctly under close inspection on weight, surface texture, and honeycomb relief.

Sapphire Crystal, Sapphire Caseback and Six Spline Screws

Scratch-resistant sapphire crystal with anti-reflective coating covers the skeletonised dial and lets the full visual depth of the honeycomb baseplate and titanium bridges read through to the wearer. The curved sapphire follows the tonneau profile and stays clear under angled light, in line with the Richard Mille sports aesthetic. The sapphire caseback shows the automatic skeleton clone movement from below, including the visible barrel and the bridge architecture, and the six titanium spline screws around the bezel match the genuine RM 21-01 fixing pattern.

Dial & Markers

Skeletonised Dial with Honeycomb Aluminium-Lithium Baseplate

The skeletonised dial of this RM 21-01 super clone reveals the honeycomb aluminium-lithium alloy baseplate, the titanium bridges, and the visible barrel from the front, with no traditional dial plate hiding the architecture. The honeycomb pattern carries through the visible baseplate, which is the visual signature that defines the Aerodyne theme of the reference. The open design lets the buyer read the time and the inner mechanics through the sapphire, and the colour palette stays in the engineered grey-and-black tones of the genuine production. This super clone matches the honeycomb cell layout, the satin finishing on the titanium bridges, and the open architecture of the genuine RM 21-01 Aerodyne dial.

Applied Richard Mille Branding and Tourbillon-Style Aperture at 6

The RM 21-01 carries applied “Richard Mille” branding on the upper bridge and a circular aperture at 6 o’clock that frames the tourbillon-style display, with white printed indices placed around the chapter ring for the hour reading. The skeleton hour and minute hands run in luminous-tipped baton form, matching the open dial language and giving a clear time reading against the honeycomb backdrop. The 6 o’clock aperture sits where the genuine RM 21-01 places its tourbillon cage and presents the same visual identity through the rotating element below. The branding placement, the printed indices, and the aperture geometry follow the limited-edition reference layout.

Tonneau Layout, Honeycomb Visual Identity and Legibility

The tonneau case shape extends the dial vertically, which gives the skeletonised display extra real estate for the honeycomb baseplate texture and the bridge architecture. The hour and minute hands stay legible against the visible movement through the luminous coating on the hand tips, and the chapter ring carries the printed indices around the outer edge for direct time reading. The honeycomb pattern, repeated across the bezel and the baseplate, locks the Aerodyne visual identity from the perimeter to the centre of the watch.

 

Movement & Specifications

Swiss-Grade Automatic Skeleton Clone with Tourbillon-Style Aperture

The Richard Mille RM 21-01 super clone runs on a Swiss-grade automatic mechanical skeleton movement engineered to resemble the architecture of the genuine Richard Mille RM 21-01 caliber, including the tourbillon-style aperture at 6 o’clock. The movement operates at 21,600 vibrations per hour, winds automatically through the rotor, and holds a power reserve of approximately 70 hours for nearly three days off the wrist. The caliber drives the central hours and minutes across a grade 5 titanium baseplate with the engineered honeycomb structure, the same architectural choice the genuine RM 21-01 uses for weight reduction and rigidity. The 6 o’clock aperture shows a rotating element engineered to mirror the visual presence of the genuine tourbillon cage rather than a true working tourbillon escapement, a distinction Super Clone Watches discloses for buyer transparency on this reference.

Accuracy, Shock Resistance and Daily Performance

Daily deviation holds within -5 to +8 seconds per day after factory regulation, close to the chronometer band that buyers expect from a Swiss-grade automatic build. The grade 5 titanium baseplate with the honeycomb structure gives the movement a strong, light core that handles shock during daily wear, which carries directly from the aerospace engineering reasoning behind the genuine RM 21-01. The 50-meter water resistance and the screw-down crown let the Aerodyne super clone hold its seal through daily wear, hand washing, and light water contact, in line with the active-luxury positioning of the reference.

Spec grid:

TypeAutomatic mechanical, skeleton, tourbillon-style display
Frequency21,600 vph (3 Hz)
Power ReserveApproximately 70 hours
BaseplateGrade 5 titanium with honeycomb structure
BridgesGrade 5 titanium, satin finished
FunctionsHours, minutes, tourbillon-style aperture at 6
Strap & Clasp

Black Rubber Strap and Titanium Deployant Buckle

The RM 21-01 super clone carries a black rubber strap with a titanium deployant buckle, the strap configuration Richard Mille pairs with the Aerodyne reference. The strap uses a soft, flexible rubber compound that holds its shape across long-term wear, with integrated lugs that flow into the tonneau case for the continuous Richard Mille silhouette. The titanium deployant buckle closes flush against the wrist for a secure hold and lets the buyer remove the watch without flexing the strap repeatedly. The Aerodyne uses the black rubber strap on this Carbon TPT variant and not a metal bracelet.

Wrist Feel, Sizing and Comfort

The watch weighs approximately 92 grams on the full black rubber strap, which gives the RM 21-01 the light wrist presence buyers expect from a Carbon-TPT-and-titanium Richard Mille build. The 50.10mm by 42.70mm tonneau case wears closer to a 44mm round watch on the wrist due to the curved tonneau geometry, and the 14.40mm height clears most shirt cuffs through the contoured profile. The Aerodyne super clone sits comfortably on wrists from 6.75 to 8.25 inches with the titanium deployant buckle adjusted across the strap holes.

 

OUR QUALITY PROMISE

Quality Checks Before Shipping

Every timepiece deserves careful attention before it reaches you. Before dispatch, each watch undergoes a visual inspection to review its overall appearance, finishing, and key components.

Visual Inspection

Checking the overall appearance, dial and finishing.

Component Review

Reviewing hands, case, bracelet and clasp.

Final Review

A final check before careful packaging and dispatch.

shopping with confidence

THE ELITE EXPERIENCE

A Better Way to Shop for Timepieces

Enjoy a more reassuring shopping experience with thoughtful service, added protection and convenient delivery with every order.

1-Year Warranty

Added peace of mind with 1-year warranty coverage.

Free Shipping

Complimentary shipping on your order.

Careful Packaging

Carefully packed to help protect your order during transit.