Richard Mille RM 35-01 Super Clone: Rafael Nadal Black NTPT Carbon Skeleton Dial

The Richard Mille RM 35-01 super clone features the all-black NTPT carbon fibre tonneau case of the Rafael Nadal time-only automatic paired with a skeletonised black-on-black dial and a black rubber strap, finished to 98% visual and dimensional parity with the genuine reference. This RM 35-01 Super Clone carries a Swiss-grade automatic clone movement of the RMAL2 caliber with a 55-hour power reserve, priced at $1,799 against a genuine market figure above $135,000.

$ 1,799

4-Stage QC

Verified factory

Insured Shipping

DHL · FedEx · 5–10 days

1-Year Warranty

Parts + servicing

Discreet Packaging

Signature required

SSL Secure

Description

Richard Mille RM 35-01 Super Clone: Rafael Nadal Black NTPT Carbon Skeleton Dial Overview

The Richard Mille RM 35-01 is the Rafael Nadal time-only automatic, built here in the all-black colourway with a black NTPT carbon fibre case, a skeletonised black dial, and a black rubber strap. This super clone follows the RM 35-01 reference with a 49.94mm by 44.50mm case, six polished titanium spline screws ringing the bezel, and a black rubber strap with a titanium folding buckle for $1,799. The tonneau geometry, the carbon weave pattern through the case surface, and the bridge layout under the skeleton dial track the genuine reference within tight production tolerance.

Case & Crystal

Tonneau Case, Crown and Lug Profile 49.94mm Black NTPT Carbon Build

The Richard Mille RM 35-01 super clone carries a tonneau case measuring 49.94mm long by 44.50mm wide and 13.15mm thick, machined to the curved Richard Mille silhouette that the Rafael Nadal references made famous. The case uses black NTPT carbon fibre across the bezel, the caseband, and the caseback, layered and pressed into the distinctive striated pattern that gives every NTPT case a unique visual fingerprint. Six titanium spline screws secure the bezel to the caseband and tie into the engineered look of the RM 35-01, and the grade 5 titanium crown at 4 o’clock seals the case for water resistance to 50 meters.

Black NTPT Carbon Fibre Construction

The black NTPT carbon fibre case of the RM 35-01 super clone delivers a hard, light, shock-resistant structure that holds its colour and finish across long-term tournament-grade wear. NTPT, which stands for North Thin Ply Technology, layers thin carbon filaments at alternating angles and bonds them under heat and pressure to produce a composite that is significantly lighter than titanium and visibly striated through every viewing angle. This material choice is the architectural reason the genuine RM 35-01 weighs under 50 grams on the head, and the super clone follows the carbon-fibre construction so the watch reads correctly under close inspection on weight, surface texture, and case rigidity.

Sapphire Crystal and Sapphire Caseback

Scratch-resistant sapphire crystal with anti-reflective coating covers the skeletonised dial and lets full light through to the open bridges below. The curved sapphire follows the tonneau profile and stays clear under angled light, a signature look of the RM 35-01. The sapphire caseback shows the automatic clone movement from below, including the variable geometry rotor, the mainspring barrel, and the gear train, and the grade 5 titanium crown supports the 50-meter water resistance of the reference.

Dial & Markers

Skeletonised Dial with Black-Toned Bridges

The skeletonised dial of this RM 35-01 super clone shows the movement bridges, the mainspring barrel, and the gear train from the front, with no traditional dial plate covering the architecture. The bridges carry a black PVD-style tone that drops the visual contrast inside the open dial and lets the black NTPT case carry through to the centre of the watch. The open design lets the buyer read both the time and the inner mechanics through the sapphire, which is the signature visual identity of every Richard Mille sports reference. This super clone matches the bridge cut-out shape, the satin finishing on the bridges, and the black-on-black architecture of the genuine black RM 35-01.

Black Hour Markers, Skeleton Hands and Small Seconds

The RM 35-01 carries applied black hour markers placed around the chapter ring, with the applied “Richard Mille” branding on the upper bridge in a matching dark tone. The skeleton hour and minute hands run in skeletonised baton form, matching the open dial language and giving a clear time reading against the dark bridges. A small seconds sub-dial sits at 6 o’clock with a skeletonised hand and a black chapter ring, the layout that defines the RM 35-01 as a time-only automatic distinct from the chronograph references. The marker placement, the print, and the upper-bridge logo follow the black reference layout.

Tonneau Layout and Legibility

The tonneau case shape extends the dial vertically, which gives the skeletonised display extra real estate for the visible movement architecture. The skeleton hour and minute hands stay legible against the black bridges through the polished edge contrast, and the chapter ring carries the minute track around the outer edge for precise reading. The small seconds sub-dial at 6 o’clock keeps the running indication separate from the central hands. The black NTPT bezel frames the dial without colour interference, which keeps the focus on the stealth all-black aesthetic that defines this colourway.

Movement & Specifications

Swiss-Grade RMAL2 Clone Automatic Skeleton Movement

The Richard Mille RM 35-01 super clone runs on a Swiss-grade automatic mechanical movement engineered to match the genuine Richard Mille RMAL2 caliber in feel, frequency, and architecture. The movement operates at 28,800 vibrations per hour, winds automatically through a variable geometry rotor, and holds a power reserve of approximately 55 hours for over two days off the wrist. The caliber drives the central hours and minutes, plus the small seconds sub-dial at 6 o’clock, across a grade 5 titanium baseplate and bridges, the same architectural choice the genuine RMAL2 uses for shock resistance and weight reduction during high-impact sport use.

Accuracy, Shock Resistance and Daily Performance

Daily deviation holds within -4 to +6 seconds per day after factory regulation, close to the chronometer band that buyers expect from a Swiss-grade automatic build. The grade 5 titanium baseplate and bridges give the movement a strong, light core that handles the shock load Rafael Nadal generates during tournament tennis play, which is the architectural reasoning behind the genuine RMAL2. The variable geometry rotor lets the wearer tune the winding efficiency to the wrist activity level, an engineering signature carried over from the wider Richard Mille automatic line. The 50-meter water resistance and the titanium crown let the RM 35-01 super clone hold its seal through daily wear, hand washing, and light water contact, in line with the active-wear positioning of the Rafael Nadal reference.

Spec grid:

TypeAutomatic mechanical, skeleton
Frequency28,800 vph (4 Hz)
Power ReserveApproximately 55 hours
BaseplateGrade 5 titanium
BridgesGrade 5 titanium with black tone, satin finished
WindingVariable geometry rotor
FunctionsHours, minutes, small seconds at 6 o’clock
Strap & Clasp

Black Rubber Strap and Titanium Folding Buckle

The RM 35-01 super clone carries a black rubber strap, the strap style Richard Mille pairs with the all-black NTPT carbon Rafael Nadal reference. The strap uses a soft, flexible rubber compound that holds its shape across long-term wear and stays comfortable through humidity and temperature swings on the court or under a shirt cuff. Integrated lugs flow into the tonneau case for the continuous Richard Mille silhouette. A grade 5 titanium folding buckle closes flush against the wrist for a secure hold and lets the buyer remove the watch without flexing the strap repeatedly. The RM 35-01 uses the black rubber strap on this NTPT carbon variant and not a metal bracelet.

Wrist Feel, Sizing and Comfort

The watch weighs approximately 65 grams on the full black rubber strap, which gives the RM 35-01 the light wrist presence buyers expect from a carbon-fibre Richard Mille. The 49.94mm by 44.50mm tonneau case wears closer to a 44mm round watch on the wrist due to the curved geometry, and the slim 13.15mm height clears most shirt cuffs. The RM 35-01 super clone sits comfortably on wrists from 6.5 to 8 inches with the titanium folding buckle adjusted across the strap holes. The all-black NTPT finish and the black rubber strap give the watch a stealth wrist presence that pairs with both sport and tailored wear.

Tonneau Case, Crown and Lug Profile 49.94mm Black NTPT Carbon Build

The Richard Mille RM 35-01 super clone carries a tonneau case measuring 49.94mm long by 44.50mm wide and 13.15mm thick, machined to the curved Richard Mille silhouette that the Rafael Nadal references made famous. The case uses black NTPT carbon fibre across the bezel, the caseband, and the caseback, layered and pressed into the distinctive striated pattern that gives every NTPT case a unique visual fingerprint. Six titanium spline screws secure the bezel to the caseband and tie into the engineered look of the RM 35-01, and the grade 5 titanium crown at 4 o’clock seals the case for water resistance to 50 meters.

Black NTPT Carbon Fibre Construction

The black NTPT carbon fibre case of the RM 35-01 super clone delivers a hard, light, shock-resistant structure that holds its colour and finish across long-term tournament-grade wear. NTPT, which stands for North Thin Ply Technology, layers thin carbon filaments at alternating angles and bonds them under heat and pressure to produce a composite that is significantly lighter than titanium and visibly striated through every viewing angle. This material choice is the architectural reason the genuine RM 35-01 weighs under 50 grams on the head, and the super clone follows the carbon-fibre construction so the watch reads correctly under close inspection on weight, surface texture, and case rigidity.

Sapphire Crystal and Sapphire Caseback

Scratch-resistant sapphire crystal with anti-reflective coating covers the skeletonised dial and lets full light through to the open bridges below. The curved sapphire follows the tonneau profile and stays clear under angled light, a signature look of the RM 35-01. The sapphire caseback shows the automatic clone movement from below, including the variable geometry rotor, the mainspring barrel, and the gear train, and the grade 5 titanium crown supports the 50-meter water resistance of the reference.

Skeletonised Dial with Black-Toned Bridges

The skeletonised dial of this RM 35-01 super clone shows the movement bridges, the mainspring barrel, and the gear train from the front, with no traditional dial plate covering the architecture. The bridges carry a black PVD-style tone that drops the visual contrast inside the open dial and lets the black NTPT case carry through to the centre of the watch. The open design lets the buyer read both the time and the inner mechanics through the sapphire, which is the signature visual identity of every Richard Mille sports reference. This super clone matches the bridge cut-out shape, the satin finishing on the bridges, and the black-on-black architecture of the genuine black RM 35-01.

Black Hour Markers, Skeleton Hands and Small Seconds

The RM 35-01 carries applied black hour markers placed around the chapter ring, with the applied “Richard Mille” branding on the upper bridge in a matching dark tone. The skeleton hour and minute hands run in skeletonised baton form, matching the open dial language and giving a clear time reading against the dark bridges. A small seconds sub-dial sits at 6 o’clock with a skeletonised hand and a black chapter ring, the layout that defines the RM 35-01 as a time-only automatic distinct from the chronograph references. The marker placement, the print, and the upper-bridge logo follow the black reference layout.

Tonneau Layout and Legibility

The tonneau case shape extends the dial vertically, which gives the skeletonised display extra real estate for the visible movement architecture. The skeleton hour and minute hands stay legible against the black bridges through the polished edge contrast, and the chapter ring carries the minute track around the outer edge for precise reading. The small seconds sub-dial at 6 o’clock keeps the running indication separate from the central hands. The black NTPT bezel frames the dial without colour interference, which keeps the focus on the stealth all-black aesthetic that defines this colourway.

Swiss-Grade RMAL2 Clone Automatic Skeleton Movement

The Richard Mille RM 35-01 super clone runs on a Swiss-grade automatic mechanical movement engineered to match the genuine Richard Mille RMAL2 caliber in feel, frequency, and architecture. The movement operates at 28,800 vibrations per hour, winds automatically through a variable geometry rotor, and holds a power reserve of approximately 55 hours for over two days off the wrist. The caliber drives the central hours and minutes, plus the small seconds sub-dial at 6 o’clock, across a grade 5 titanium baseplate and bridges, the same architectural choice the genuine RMAL2 uses for shock resistance and weight reduction during high-impact sport use.

Accuracy, Shock Resistance and Daily Performance

Daily deviation holds within -4 to +6 seconds per day after factory regulation, close to the chronometer band that buyers expect from a Swiss-grade automatic build. The grade 5 titanium baseplate and bridges give the movement a strong, light core that handles the shock load Rafael Nadal generates during tournament tennis play, which is the architectural reasoning behind the genuine RMAL2. The variable geometry rotor lets the wearer tune the winding efficiency to the wrist activity level, an engineering signature carried over from the wider Richard Mille automatic line. The 50-meter water resistance and the titanium crown let the RM 35-01 super clone hold its seal through daily wear, hand washing, and light water contact, in line with the active-wear positioning of the Rafael Nadal reference.

Spec grid:

TypeAutomatic mechanical, skeleton
Frequency28,800 vph (4 Hz)
Power ReserveApproximately 55 hours
BaseplateGrade 5 titanium
BridgesGrade 5 titanium with black tone, satin finished
WindingVariable geometry rotor
FunctionsHours, minutes, small seconds at 6 o’clock

Black Rubber Strap and Titanium Folding Buckle

The RM 35-01 super clone carries a black rubber strap, the strap style Richard Mille pairs with the all-black NTPT carbon Rafael Nadal reference. The strap uses a soft, flexible rubber compound that holds its shape across long-term wear and stays comfortable through humidity and temperature swings on the court or under a shirt cuff. Integrated lugs flow into the tonneau case for the continuous Richard Mille silhouette. A grade 5 titanium folding buckle closes flush against the wrist for a secure hold and lets the buyer remove the watch without flexing the strap repeatedly. The RM 35-01 uses the black rubber strap on this NTPT carbon variant and not a metal bracelet.

Wrist Feel, Sizing and Comfort

The watch weighs approximately 65 grams on the full black rubber strap, which gives the RM 35-01 the light wrist presence buyers expect from a carbon-fibre Richard Mille. The 49.94mm by 44.50mm tonneau case wears closer to a 44mm round watch on the wrist due to the curved geometry, and the slim 13.15mm height clears most shirt cuffs. The RM 35-01 super clone sits comfortably on wrists from 6.5 to 8 inches with the titanium folding buckle adjusted across the strap holes. The all-black NTPT finish and the black rubber strap give the watch a stealth wrist presence that pairs with both sport and tailored wear.

Case & Crystal

Tonneau Case, Crown and Lug Profile 49.94mm Black NTPT Carbon Build

The Richard Mille RM 35-01 super clone carries a tonneau case measuring 49.94mm long by 44.50mm wide and 13.15mm thick, machined to the curved Richard Mille silhouette that the Rafael Nadal references made famous. The case uses black NTPT carbon fibre across the bezel, the caseband, and the caseback, layered and pressed into the distinctive striated pattern that gives every NTPT case a unique visual fingerprint. Six titanium spline screws secure the bezel to the caseband and tie into the engineered look of the RM 35-01, and the grade 5 titanium crown at 4 o’clock seals the case for water resistance to 50 meters.

Black NTPT Carbon Fibre Construction

The black NTPT carbon fibre case of the RM 35-01 super clone delivers a hard, light, shock-resistant structure that holds its colour and finish across long-term tournament-grade wear. NTPT, which stands for North Thin Ply Technology, layers thin carbon filaments at alternating angles and bonds them under heat and pressure to produce a composite that is significantly lighter than titanium and visibly striated through every viewing angle. This material choice is the architectural reason the genuine RM 35-01 weighs under 50 grams on the head, and the super clone follows the carbon-fibre construction so the watch reads correctly under close inspection on weight, surface texture, and case rigidity.

Sapphire Crystal and Sapphire Caseback

Scratch-resistant sapphire crystal with anti-reflective coating covers the skeletonised dial and lets full light through to the open bridges below. The curved sapphire follows the tonneau profile and stays clear under angled light, a signature look of the RM 35-01. The sapphire caseback shows the automatic clone movement from below, including the variable geometry rotor, the mainspring barrel, and the gear train, and the grade 5 titanium crown supports the 50-meter water resistance of the reference.

Dial & Markers

Skeletonised Dial with Black-Toned Bridges

The skeletonised dial of this RM 35-01 super clone shows the movement bridges, the mainspring barrel, and the gear train from the front, with no traditional dial plate covering the architecture. The bridges carry a black PVD-style tone that drops the visual contrast inside the open dial and lets the black NTPT case carry through to the centre of the watch. The open design lets the buyer read both the time and the inner mechanics through the sapphire, which is the signature visual identity of every Richard Mille sports reference. This super clone matches the bridge cut-out shape, the satin finishing on the bridges, and the black-on-black architecture of the genuine black RM 35-01.

Black Hour Markers, Skeleton Hands and Small Seconds

The RM 35-01 carries applied black hour markers placed around the chapter ring, with the applied “Richard Mille” branding on the upper bridge in a matching dark tone. The skeleton hour and minute hands run in skeletonised baton form, matching the open dial language and giving a clear time reading against the dark bridges. A small seconds sub-dial sits at 6 o’clock with a skeletonised hand and a black chapter ring, the layout that defines the RM 35-01 as a time-only automatic distinct from the chronograph references. The marker placement, the print, and the upper-bridge logo follow the black reference layout.

Tonneau Layout and Legibility

The tonneau case shape extends the dial vertically, which gives the skeletonised display extra real estate for the visible movement architecture. The skeleton hour and minute hands stay legible against the black bridges through the polished edge contrast, and the chapter ring carries the minute track around the outer edge for precise reading. The small seconds sub-dial at 6 o’clock keeps the running indication separate from the central hands. The black NTPT bezel frames the dial without colour interference, which keeps the focus on the stealth all-black aesthetic that defines this colourway.

Movement & Specifications

Swiss-Grade RMAL2 Clone Automatic Skeleton Movement

The Richard Mille RM 35-01 super clone runs on a Swiss-grade automatic mechanical movement engineered to match the genuine Richard Mille RMAL2 caliber in feel, frequency, and architecture. The movement operates at 28,800 vibrations per hour, winds automatically through a variable geometry rotor, and holds a power reserve of approximately 55 hours for over two days off the wrist. The caliber drives the central hours and minutes, plus the small seconds sub-dial at 6 o’clock, across a grade 5 titanium baseplate and bridges, the same architectural choice the genuine RMAL2 uses for shock resistance and weight reduction during high-impact sport use.

Accuracy, Shock Resistance and Daily Performance

Daily deviation holds within -4 to +6 seconds per day after factory regulation, close to the chronometer band that buyers expect from a Swiss-grade automatic build. The grade 5 titanium baseplate and bridges give the movement a strong, light core that handles the shock load Rafael Nadal generates during tournament tennis play, which is the architectural reasoning behind the genuine RMAL2. The variable geometry rotor lets the wearer tune the winding efficiency to the wrist activity level, an engineering signature carried over from the wider Richard Mille automatic line. The 50-meter water resistance and the titanium crown let the RM 35-01 super clone hold its seal through daily wear, hand washing, and light water contact, in line with the active-wear positioning of the Rafael Nadal reference.

Spec grid:

TypeAutomatic mechanical, skeleton
Frequency28,800 vph (4 Hz)
Power ReserveApproximately 55 hours
BaseplateGrade 5 titanium
BridgesGrade 5 titanium with black tone, satin finished
WindingVariable geometry rotor
FunctionsHours, minutes, small seconds at 6 o’clock
Strap & Clasp

Black Rubber Strap and Titanium Folding Buckle

The RM 35-01 super clone carries a black rubber strap, the strap style Richard Mille pairs with the all-black NTPT carbon Rafael Nadal reference. The strap uses a soft, flexible rubber compound that holds its shape across long-term wear and stays comfortable through humidity and temperature swings on the court or under a shirt cuff. Integrated lugs flow into the tonneau case for the continuous Richard Mille silhouette. A grade 5 titanium folding buckle closes flush against the wrist for a secure hold and lets the buyer remove the watch without flexing the strap repeatedly. The RM 35-01 uses the black rubber strap on this NTPT carbon variant and not a metal bracelet.

Wrist Feel, Sizing and Comfort

The watch weighs approximately 65 grams on the full black rubber strap, which gives the RM 35-01 the light wrist presence buyers expect from a carbon-fibre Richard Mille. The 49.94mm by 44.50mm tonneau case wears closer to a 44mm round watch on the wrist due to the curved geometry, and the slim 13.15mm height clears most shirt cuffs. The RM 35-01 super clone sits comfortably on wrists from 6.5 to 8 inches with the titanium folding buckle adjusted across the strap holes. The all-black NTPT finish and the black rubber strap give the watch a stealth wrist presence that pairs with both sport and tailored wear.

OUR QUALITY PROMISE

Quality Checks Before Shipping

Every timepiece deserves careful attention before it reaches you. Before dispatch, each watch undergoes a visual inspection to review its overall appearance, finishing, and key components.

Visual Inspection

Checking the overall appearance, dial and finishing.

Component Review

Reviewing hands, case, bracelet and clasp.

Final Review

A final check before careful packaging and dispatch.

shopping with confidence

THE ELITE EXPERIENCE

A Better Way to Shop for Timepieces

Enjoy a more reassuring shopping experience with thoughtful service, added protection and convenient delivery with every order.

1-Year Warranty

Added peace of mind with 1-year warranty coverage.

Free Shipping

Complimentary shipping on your order.

Careful Packaging

Carefully packed to help protect your order during transit.