Richard Mille RM 35-01 Super Clone: Rafael Nadal White ATZ Ceramic Skeleton Dial
The Richard Mille RM 35-01 super clone features the white ATZ ceramic tonneau case of the Rafael Nadal automatic reference paired with a skeletonised dial and a white rubber strap, finished to 98% visual and dimensional parity with the genuine model. This RM 35-01 Super Clone carries an automatic time-only mechanical clone of the RMAL2 caliber with a 55-hour power reserve, priced at $1,799 against a genuine market figure above $150,000.
$ 1,799
4-Stage QC
Verified factory
Insured Shipping
DHL · FedEx · 5–10 days
1-Year Warranty
Parts + servicing
Discreet Packaging
Signature required
SSL Secure
Description
Richard Mille RM 35-01 Super Clone: Rafael Nadal White ATZ Ceramic Skeleton Dial Overview
The Richard Mille RM 35-01 is the Rafael Nadal automatic tonneau sports watch, built here with a white ATZ ceramic case, a grade 5 titanium caseband, and a skeletonised dial. This super clone follows the RM 35-01 reference with a 49.94mm by 44.50mm case, 6 titanium spline screws set through the bezel, a small seconds sub-dial at 6 o’clock, and a white rubber strap with a titanium folding buckle for $1,799. The tonneau geometry, the bridge layout under the skeleton dial, and the case finish track the genuine reference within tight production tolerance.
Case & Crystal
Tonneau Case, Crown and Lug Profile 49.94mm White Ceramic Build
The Richard Mille RM 35-01 super clone carries a tonneau case measuring 49.94mm long by 44.50mm wide and 13.15mm thick, machined to the curved Richard Mille silhouette that the Rafael Nadal collaboration defined for tennis-grade wear. The case uses white ATZ ceramic for the upper bezel and caseback ring, paired with a grade 5 titanium caseband that holds the structural rigidity of the build. Six polished titanium spline screws sit through the bezel and tie into the engineered look of the RM 35-01, and the crown at 4 o’clock locks the case for water resistance to 50 meters.
White ATZ Ceramic and Grade 5 Titanium Construction
The white ATZ ceramic bezel and caseback ring of the RM 35-01 super clone deliver a hard, scratch-resistant surface that holds the matte white colour across long-term wear. ATZ ceramic, an alumina-toughened zirconia composite, sits among the hardest engineered materials used in modern watchmaking and gives the case the bright, even surface buyers expect from this white reference. The grade 5 titanium caseband provides a strong, light core that keeps the watch comfortable at the wrist across full-day wear. This super clone follows the genuine ceramic-and-titanium construction so the RM 35-01 reads correctly under close inspection on weight, surface texture, and edge geometry.
Sapphire Crystal and Sapphire Caseback
Scratch-resistant sapphire crystal with anti-reflective coating covers the skeletonised dial and lets full light through to the open bridges below. The curved sapphire follows the tonneau profile and stays clear under angled light, which is a signature visual cue of the RM 35-01. The sapphire caseback shows the automatic clone movement and the variable geometry rotor from below, including the visible mainspring barrel and the gear train, and the screw-down crown supports the 50-meter water resistance of the reference.
Dial & Markers
Skeletonised Dial with Open Bridges
The skeletonised dial of this RM 35-01 super clone shows the movement bridges, the mainspring barrel, and the gear train from the front, with no traditional dial plate covering the architecture. The open design lets the buyer read both the time and the inner mechanics through the sapphire, which is the signature visual identity of every Richard Mille sports reference. This super clone matches the bridge cut-out shape, the satin finishing on the bridges, and the open architecture of the genuine white RM 35-01.
White Markers, White-Tipped Hands and Applied Branding
The RM 35-01 carries applied white hour markers placed around the chapter ring, with applied “Richard Mille” branding on the upper bridge in matching white print for visual consistency across the dial. The skeleton hour and minute hands run with white tips that read cleanly against the open bridges through high contrast. A small seconds sub-dial sits at 6 o’clock with a white-tipped sub-hand, which gives the buyer a constant running indication of the automatic movement underneath. The marker placement, the print, and the upper-bridge logo follow the white production layout.
Tonneau Layout and Legibility
The tonneau case shape extends the dial vertically, which gives the skeletonised display extra real estate for the visible movement architecture. The skeleton hour and minute hands stay legible against the open bridges through the white-on-skeleton contrast, and the chapter ring carries the minute track around the outer edge for precise reading. The white ceramic bezel frames the dial without colour interference, which keeps the focus on the movement underneath and the small seconds at 6 o’clock.
Movement & Specifications
Swiss-Grade RMAL2 Clone Automatic Skeleton Movement
The Richard Mille RM 35-01 super clone runs on a Swiss-grade self-winding mechanical movement engineered to match the genuine Richard Mille RMAL2 caliber in feel, frequency, and architecture. The movement operates at 28,800 vibrations per hour, winds through a variable geometry rotor that adjusts winding efficiency to the wearer’s activity level, and holds a power reserve of approximately 55 hours for over two days off the wrist. The caliber drives the central hours and minutes and the small seconds at 6 o’clock across a grade 5 titanium baseplate and bridges, the same architectural choice the genuine RMAL2 uses for shock resistance and weight reduction.
Accuracy, Shock Resistance and Daily Performance
Daily deviation holds within -4 to +6 seconds per day after factory regulation, close to the chronometer band that buyers expect from a Swiss-grade automatic build. The grade 5 titanium baseplate and bridges give the movement a strong, light core that handles shock during sport use, which is the architectural reasoning behind the genuine RMAL2 and the tennis-grade brief of the Rafael Nadal collaboration. The 50-meter water resistance and the screw-down crown let the RM 35-01 super clone hold its seal through daily wear, hand washing, and light water contact, in line with the active-wear positioning of the Rafael Nadal reference.
Spec grid:
Strap & Clasp
White Rubber Strap and Titanium Folding Buckle
The RM 35-01 super clone carries a white rubber strap, the strap style Richard Mille pairs with the white ATZ ceramic Rafael Nadal reference. The strap uses a soft, flexible rubber compound that holds its shape across long-term wear, with integrated lugs that flow into the tonneau case for the continuous Richard Mille silhouette. A grade 5 titanium folding buckle closes flush against the wrist for a secure hold and lets the buyer remove the watch without flexing the strap repeatedly. The RM 35-01 uses the white rubber strap on this white ceramic variant and not a metal bracelet.
Wrist Feel, Sizing and Comfort
The watch weighs approximately 95 grams on the full white rubber strap, which gives the RM 35-01 the light wrist presence buyers expect from a ceramic-and-titanium Richard Mille. The 49.94mm by 44.50mm tonneau case wears closer to a 44mm round watch on the wrist due to the curved geometry, and the 13.15mm height clears most shirt cuffs. The RM 35-01 super clone sits comfortably on wrists from 6.5 to 8.25 inches with the titanium folding buckle adjusted across the strap holes.
Tonneau Case, Crown and Lug Profile 49.94mm White Ceramic Build
The Richard Mille RM 35-01 super clone carries a tonneau case measuring 49.94mm long by 44.50mm wide and 13.15mm thick, machined to the curved Richard Mille silhouette that the Rafael Nadal collaboration defined for tennis-grade wear. The case uses white ATZ ceramic for the upper bezel and caseback ring, paired with a grade 5 titanium caseband that holds the structural rigidity of the build. Six polished titanium spline screws sit through the bezel and tie into the engineered look of the RM 35-01, and the crown at 4 o’clock locks the case for water resistance to 50 meters.
White ATZ Ceramic and Grade 5 Titanium Construction
The white ATZ ceramic bezel and caseback ring of the RM 35-01 super clone deliver a hard, scratch-resistant surface that holds the matte white colour across long-term wear. ATZ ceramic, an alumina-toughened zirconia composite, sits among the hardest engineered materials used in modern watchmaking and gives the case the bright, even surface buyers expect from this white reference. The grade 5 titanium caseband provides a strong, light core that keeps the watch comfortable at the wrist across full-day wear. This super clone follows the genuine ceramic-and-titanium construction so the RM 35-01 reads correctly under close inspection on weight, surface texture, and edge geometry.
Sapphire Crystal and Sapphire Caseback
Scratch-resistant sapphire crystal with anti-reflective coating covers the skeletonised dial and lets full light through to the open bridges below. The curved sapphire follows the tonneau profile and stays clear under angled light, which is a signature visual cue of the RM 35-01. The sapphire caseback shows the automatic clone movement and the variable geometry rotor from below, including the visible mainspring barrel and the gear train, and the screw-down crown supports the 50-meter water resistance of the reference.
Skeletonised Dial with Open Bridges
The skeletonised dial of this RM 35-01 super clone shows the movement bridges, the mainspring barrel, and the gear train from the front, with no traditional dial plate covering the architecture. The open design lets the buyer read both the time and the inner mechanics through the sapphire, which is the signature visual identity of every Richard Mille sports reference. This super clone matches the bridge cut-out shape, the satin finishing on the bridges, and the open architecture of the genuine white RM 35-01.
White Markers, White-Tipped Hands and Applied Branding
The RM 35-01 carries applied white hour markers placed around the chapter ring, with applied “Richard Mille” branding on the upper bridge in matching white print for visual consistency across the dial. The skeleton hour and minute hands run with white tips that read cleanly against the open bridges through high contrast. A small seconds sub-dial sits at 6 o’clock with a white-tipped sub-hand, which gives the buyer a constant running indication of the automatic movement underneath. The marker placement, the print, and the upper-bridge logo follow the white production layout.
Tonneau Layout and Legibility
The tonneau case shape extends the dial vertically, which gives the skeletonised display extra real estate for the visible movement architecture. The skeleton hour and minute hands stay legible against the open bridges through the white-on-skeleton contrast, and the chapter ring carries the minute track around the outer edge for precise reading. The white ceramic bezel frames the dial without colour interference, which keeps the focus on the movement underneath and the small seconds at 6 o’clock.
Swiss-Grade RMAL2 Clone Automatic Skeleton Movement
The Richard Mille RM 35-01 super clone runs on a Swiss-grade self-winding mechanical movement engineered to match the genuine Richard Mille RMAL2 caliber in feel, frequency, and architecture. The movement operates at 28,800 vibrations per hour, winds through a variable geometry rotor that adjusts winding efficiency to the wearer’s activity level, and holds a power reserve of approximately 55 hours for over two days off the wrist. The caliber drives the central hours and minutes and the small seconds at 6 o’clock across a grade 5 titanium baseplate and bridges, the same architectural choice the genuine RMAL2 uses for shock resistance and weight reduction.
Accuracy, Shock Resistance and Daily Performance
Daily deviation holds within -4 to +6 seconds per day after factory regulation, close to the chronometer band that buyers expect from a Swiss-grade automatic build. The grade 5 titanium baseplate and bridges give the movement a strong, light core that handles shock during sport use, which is the architectural reasoning behind the genuine RMAL2 and the tennis-grade brief of the Rafael Nadal collaboration. The 50-meter water resistance and the screw-down crown let the RM 35-01 super clone hold its seal through daily wear, hand washing, and light water contact, in line with the active-wear positioning of the Rafael Nadal reference.
Spec grid:
White Rubber Strap and Titanium Folding Buckle
The RM 35-01 super clone carries a white rubber strap, the strap style Richard Mille pairs with the white ATZ ceramic Rafael Nadal reference. The strap uses a soft, flexible rubber compound that holds its shape across long-term wear, with integrated lugs that flow into the tonneau case for the continuous Richard Mille silhouette. A grade 5 titanium folding buckle closes flush against the wrist for a secure hold and lets the buyer remove the watch without flexing the strap repeatedly. The RM 35-01 uses the white rubber strap on this white ceramic variant and not a metal bracelet.
Wrist Feel, Sizing and Comfort
The watch weighs approximately 95 grams on the full white rubber strap, which gives the RM 35-01 the light wrist presence buyers expect from a ceramic-and-titanium Richard Mille. The 49.94mm by 44.50mm tonneau case wears closer to a 44mm round watch on the wrist due to the curved geometry, and the 13.15mm height clears most shirt cuffs. The RM 35-01 super clone sits comfortably on wrists from 6.5 to 8.25 inches with the titanium folding buckle adjusted across the strap holes.
Case & Crystal
Tonneau Case, Crown and Lug Profile 49.94mm White Ceramic Build
The Richard Mille RM 35-01 super clone carries a tonneau case measuring 49.94mm long by 44.50mm wide and 13.15mm thick, machined to the curved Richard Mille silhouette that the Rafael Nadal collaboration defined for tennis-grade wear. The case uses white ATZ ceramic for the upper bezel and caseback ring, paired with a grade 5 titanium caseband that holds the structural rigidity of the build. Six polished titanium spline screws sit through the bezel and tie into the engineered look of the RM 35-01, and the crown at 4 o’clock locks the case for water resistance to 50 meters.
White ATZ Ceramic and Grade 5 Titanium Construction
The white ATZ ceramic bezel and caseback ring of the RM 35-01 super clone deliver a hard, scratch-resistant surface that holds the matte white colour across long-term wear. ATZ ceramic, an alumina-toughened zirconia composite, sits among the hardest engineered materials used in modern watchmaking and gives the case the bright, even surface buyers expect from this white reference. The grade 5 titanium caseband provides a strong, light core that keeps the watch comfortable at the wrist across full-day wear. This super clone follows the genuine ceramic-and-titanium construction so the RM 35-01 reads correctly under close inspection on weight, surface texture, and edge geometry.
Sapphire Crystal and Sapphire Caseback
Scratch-resistant sapphire crystal with anti-reflective coating covers the skeletonised dial and lets full light through to the open bridges below. The curved sapphire follows the tonneau profile and stays clear under angled light, which is a signature visual cue of the RM 35-01. The sapphire caseback shows the automatic clone movement and the variable geometry rotor from below, including the visible mainspring barrel and the gear train, and the screw-down crown supports the 50-meter water resistance of the reference.
Dial & Markers
Skeletonised Dial with Open Bridges
The skeletonised dial of this RM 35-01 super clone shows the movement bridges, the mainspring barrel, and the gear train from the front, with no traditional dial plate covering the architecture. The open design lets the buyer read both the time and the inner mechanics through the sapphire, which is the signature visual identity of every Richard Mille sports reference. This super clone matches the bridge cut-out shape, the satin finishing on the bridges, and the open architecture of the genuine white RM 35-01.
White Markers, White-Tipped Hands and Applied Branding
The RM 35-01 carries applied white hour markers placed around the chapter ring, with applied “Richard Mille” branding on the upper bridge in matching white print for visual consistency across the dial. The skeleton hour and minute hands run with white tips that read cleanly against the open bridges through high contrast. A small seconds sub-dial sits at 6 o’clock with a white-tipped sub-hand, which gives the buyer a constant running indication of the automatic movement underneath. The marker placement, the print, and the upper-bridge logo follow the white production layout.
Tonneau Layout and Legibility
The tonneau case shape extends the dial vertically, which gives the skeletonised display extra real estate for the visible movement architecture. The skeleton hour and minute hands stay legible against the open bridges through the white-on-skeleton contrast, and the chapter ring carries the minute track around the outer edge for precise reading. The white ceramic bezel frames the dial without colour interference, which keeps the focus on the movement underneath and the small seconds at 6 o’clock.
Movement & Specifications
Swiss-Grade RMAL2 Clone Automatic Skeleton Movement
The Richard Mille RM 35-01 super clone runs on a Swiss-grade self-winding mechanical movement engineered to match the genuine Richard Mille RMAL2 caliber in feel, frequency, and architecture. The movement operates at 28,800 vibrations per hour, winds through a variable geometry rotor that adjusts winding efficiency to the wearer’s activity level, and holds a power reserve of approximately 55 hours for over two days off the wrist. The caliber drives the central hours and minutes and the small seconds at 6 o’clock across a grade 5 titanium baseplate and bridges, the same architectural choice the genuine RMAL2 uses for shock resistance and weight reduction.
Accuracy, Shock Resistance and Daily Performance
Daily deviation holds within -4 to +6 seconds per day after factory regulation, close to the chronometer band that buyers expect from a Swiss-grade automatic build. The grade 5 titanium baseplate and bridges give the movement a strong, light core that handles shock during sport use, which is the architectural reasoning behind the genuine RMAL2 and the tennis-grade brief of the Rafael Nadal collaboration. The 50-meter water resistance and the screw-down crown let the RM 35-01 super clone hold its seal through daily wear, hand washing, and light water contact, in line with the active-wear positioning of the Rafael Nadal reference.
Spec grid:
Strap & Clasp
White Rubber Strap and Titanium Folding Buckle
The RM 35-01 super clone carries a white rubber strap, the strap style Richard Mille pairs with the white ATZ ceramic Rafael Nadal reference. The strap uses a soft, flexible rubber compound that holds its shape across long-term wear, with integrated lugs that flow into the tonneau case for the continuous Richard Mille silhouette. A grade 5 titanium folding buckle closes flush against the wrist for a secure hold and lets the buyer remove the watch without flexing the strap repeatedly. The RM 35-01 uses the white rubber strap on this white ceramic variant and not a metal bracelet.
Wrist Feel, Sizing and Comfort
The watch weighs approximately 95 grams on the full white rubber strap, which gives the RM 35-01 the light wrist presence buyers expect from a ceramic-and-titanium Richard Mille. The 49.94mm by 44.50mm tonneau case wears closer to a 44mm round watch on the wrist due to the curved geometry, and the 13.15mm height clears most shirt cuffs. The RM 35-01 super clone sits comfortably on wrists from 6.5 to 8.25 inches with the titanium folding buckle adjusted across the strap holes.
OUR QUALITY PROMISE
Quality Checks Before Shipping
Every timepiece deserves careful attention before it reaches you. Before dispatch, each watch undergoes a visual inspection to review its overall appearance, finishing, and key components.
Visual Inspection
Checking the overall appearance, dial and finishing.
Component Review
Reviewing hands, case, bracelet and clasp.
Final Review
A final check before careful packaging and dispatch.
THE ELITE EXPERIENCE
A Better Way to Shop for Timepieces
Enjoy a more reassuring shopping experience with thoughtful service, added protection and convenient delivery with every order.
1-Year Warranty
Added peace of mind with 1-year warranty coverage.
Free Shipping
Complimentary shipping on your order.
Careful Packaging
Carefully packed to help protect your order during transit.






