Rolex Cellini Danaos 4233 White Dial Super Clone : 38mm Two-Tone Gold Dress Watch

$ 1,299

4-Stage QC

Verified factory

Insured Shipping

DHL · FedEx · 5–10 days

1-Year Warranty

Parts + servicing

Discreet Packaging

Signature required

SSL Secure

Description

Rolex Cellini Danaos 4233 White Dial Super Clone : 38mm Two-Tone Gold Dress Watch Overview

The Rolex Cellini Danaos 4233 is the 38mm two-tone gold dress watch Rolex produced in the Cellini line between 1993 and the mid-2000s, taking its name from Danaus, the legendary king of Argos in Greek mythology. The Cellini Danaos 4233 super clone matches the white lacquer dial, applied Roman numerals, two-tone gold case construction, and dress watch silhouette of the genuine reference at 98% accuracy, sourced from a specialist partner factory to Super Clone Watches quality standards for $1,299.

Case & Crystal

 Case, Crown and Crystal | 38mm Two-Tone Gold Build

The Rolex Cellini Danaos 4233 super clone features a 38mm round case standing 9.5mm tall, built from a 904L stainless steel core finished with high-grade gold PVD in the original two-tone white gold and yellow gold configuration. The slim 9.5mm height matches the dress watch profile that allows the Cellini Danaos 4233 to sit flush under a shirt cuff without lift or drag.

 Case Geometry and Finishing

The case follows the original Cellini Danaos grammar of alternating polished and satin surfaces. Polished bezel sections sit between satin-brushed outer ring portions in the two-tone gold finish. The lugs taper inward with mirror-polished tops and brushed flanks. The Rolex-signed crown sits at 3 o’clock in yellow gold-tone, finished with the engraved Rolex coronet at the tip.

Sapphire Crystal and Caseback

Anti-reflective sapphire crystal sits flat over the dial, matching the genuine 4233 profile rather than the domed crystals seen on sport Rolex references. The screw-down caseback carries the Rolex coronet engraving along with the Cellini reference markings. Water resistance holds at 30 meters, consistent with the original Cellini Danaos dress watch specification.

Dial & Markers

White Lacquer Dial with Applied Roman Numerals

The white lacquer dial on this Cellini Danaos 4233 super clone matches the egg-shell white tone and gloss depth of the genuine reference under direct light. Applied yellow gold-tone Roman numerals mark each hour, paired with a slim minute track along the outer rehaut. The dial surface holds zero visible texture variation across the face, preserving the clean dress-watch aesthetic of the original 4233.

Rolex Coronet and Cellini Signature

The applied yellow gold-tone Rolex coronet sits at 12 o’clock with crisp edges and balanced proportions. The “Rolex” wordmark and “Cellini” script print directly beneath the coronet in the original typography. The “Swiss Made” hallmark appears at the dial base, completing the Cellini Danaos 4233 dial signature layout exactly as the genuine reference carries it.

Dauphine Hands and Central Seconds

Polished yellow gold-tone dauphine hour and minute hands sweep across the dial with the proportions of the original 4233. The slim central seconds hand carries a matching yellow gold-tone finish. The faceted dauphine profile catches light along the polished spine, a finishing detail that separates the Cellini Danaos 4233 from sport Rolex references using Mercedes or stick hands.

Movement & Specifications

Swiss-Grade Automatic Movement | Clone of Rolex Caliber 1602 Footprint

The Cellini Danaos 4233 super clone runs on a Swiss-grade automatic movement engineered to match the case footprint and slim profile of the genuine Rolex Caliber 1602 the original 4233 used. The movement operates at 28,800 vibrations per hour, holds 48 hours of power reserve, and drives the hours, minutes, and central seconds the dress watch configuration requires.

 Accuracy and Finishing

Daily deviation holds within -5 to +10 seconds per day after factory regulation. The movement receives Côtes de Genève striping on the bridges, perlage on the mainplate, and circular graining on the oscillating weight. The solid screw-down caseback of the Cellini Danaos 4233 super clone conceals the movement from view, matching the genuine reference where Rolex uses a closed caseback rather than an exhibition display.

The movement specifications of this Cellini Danaos 4233 super clone are listed below.

TypeAutomatic (time-only, central seconds)
Frequency28,800 vph (4 Hz)
Power Reserve48 hours
Jewels27
WindingBidirectional automatic rotor
Regulation-5 to +10 seconds per day
Strap & Buckle

 Genuine Leather Strap and 18k Gold-Tone Pin Buckle

The Cellini Danaos 4233 super clone ships on a genuine leather strap finished in black with subtle padded stitching that follows the original Rolex Cellini specifications. The 18mm strap width at the lugs tapers to a 16mm buckle end, holding the dress watch silhouette across the wrist. The leather lining sits soft against the skin for all-day office and evening wear.

Wrist Feel, Weight and Fit

The Cellini Danaos 4233 super clone weighs approximately 75 grams on the strap, light enough to disappear into the wrist after the first hour of wear. The 38mm case and 44mm lug-to-lug distance suit wrists measuring 6.25 to 7.75 inches. The 9.5mm case height allows the watch to slip under a dress shirt cuff without resistance, a profile the Cellini Danaos line built its reputation on.

 Case, Crown and Crystal | 38mm Two-Tone Gold Build

The Rolex Cellini Danaos 4233 super clone features a 38mm round case standing 9.5mm tall, built from a 904L stainless steel core finished with high-grade gold PVD in the original two-tone white gold and yellow gold configuration. The slim 9.5mm height matches the dress watch profile that allows the Cellini Danaos 4233 to sit flush under a shirt cuff without lift or drag.

 Case Geometry and Finishing

The case follows the original Cellini Danaos grammar of alternating polished and satin surfaces. Polished bezel sections sit between satin-brushed outer ring portions in the two-tone gold finish. The lugs taper inward with mirror-polished tops and brushed flanks. The Rolex-signed crown sits at 3 o’clock in yellow gold-tone, finished with the engraved Rolex coronet at the tip.

Sapphire Crystal and Caseback

Anti-reflective sapphire crystal sits flat over the dial, matching the genuine 4233 profile rather than the domed crystals seen on sport Rolex references. The screw-down caseback carries the Rolex coronet engraving along with the Cellini reference markings. Water resistance holds at 30 meters, consistent with the original Cellini Danaos dress watch specification.

White Lacquer Dial with Applied Roman Numerals

The white lacquer dial on this Cellini Danaos 4233 super clone matches the egg-shell white tone and gloss depth of the genuine reference under direct light. Applied yellow gold-tone Roman numerals mark each hour, paired with a slim minute track along the outer rehaut. The dial surface holds zero visible texture variation across the face, preserving the clean dress-watch aesthetic of the original 4233.

Rolex Coronet and Cellini Signature

The applied yellow gold-tone Rolex coronet sits at 12 o’clock with crisp edges and balanced proportions. The “Rolex” wordmark and “Cellini” script print directly beneath the coronet in the original typography. The “Swiss Made” hallmark appears at the dial base, completing the Cellini Danaos 4233 dial signature layout exactly as the genuine reference carries it.

Dauphine Hands and Central Seconds

Polished yellow gold-tone dauphine hour and minute hands sweep across the dial with the proportions of the original 4233. The slim central seconds hand carries a matching yellow gold-tone finish. The faceted dauphine profile catches light along the polished spine, a finishing detail that separates the Cellini Danaos 4233 from sport Rolex references using Mercedes or stick hands.

Swiss-Grade Automatic Movement | Clone of Rolex Caliber 1602 Footprint

The Cellini Danaos 4233 super clone runs on a Swiss-grade automatic movement engineered to match the case footprint and slim profile of the genuine Rolex Caliber 1602 the original 4233 used. The movement operates at 28,800 vibrations per hour, holds 48 hours of power reserve, and drives the hours, minutes, and central seconds the dress watch configuration requires.

 Accuracy and Finishing

Daily deviation holds within -5 to +10 seconds per day after factory regulation. The movement receives Côtes de Genève striping on the bridges, perlage on the mainplate, and circular graining on the oscillating weight. The solid screw-down caseback of the Cellini Danaos 4233 super clone conceals the movement from view, matching the genuine reference where Rolex uses a closed caseback rather than an exhibition display.

The movement specifications of this Cellini Danaos 4233 super clone are listed below.

TypeAutomatic (time-only, central seconds)
Frequency28,800 vph (4 Hz)
Power Reserve48 hours
Jewels27
WindingBidirectional automatic rotor
Regulation-5 to +10 seconds per day

 Genuine Leather Strap and 18k Gold-Tone Pin Buckle

The Cellini Danaos 4233 super clone ships on a genuine leather strap finished in black with subtle padded stitching that follows the original Rolex Cellini specifications. The 18mm strap width at the lugs tapers to a 16mm buckle end, holding the dress watch silhouette across the wrist. The leather lining sits soft against the skin for all-day office and evening wear.

Wrist Feel, Weight and Fit

The Cellini Danaos 4233 super clone weighs approximately 75 grams on the strap, light enough to disappear into the wrist after the first hour of wear. The 38mm case and 44mm lug-to-lug distance suit wrists measuring 6.25 to 7.75 inches. The 9.5mm case height allows the watch to slip under a dress shirt cuff without resistance, a profile the Cellini Danaos line built its reputation on.

Case & Crystal

 Case, Crown and Crystal | 38mm Two-Tone Gold Build

The Rolex Cellini Danaos 4233 super clone features a 38mm round case standing 9.5mm tall, built from a 904L stainless steel core finished with high-grade gold PVD in the original two-tone white gold and yellow gold configuration. The slim 9.5mm height matches the dress watch profile that allows the Cellini Danaos 4233 to sit flush under a shirt cuff without lift or drag.

 Case Geometry and Finishing

The case follows the original Cellini Danaos grammar of alternating polished and satin surfaces. Polished bezel sections sit between satin-brushed outer ring portions in the two-tone gold finish. The lugs taper inward with mirror-polished tops and brushed flanks. The Rolex-signed crown sits at 3 o’clock in yellow gold-tone, finished with the engraved Rolex coronet at the tip.

Sapphire Crystal and Caseback

Anti-reflective sapphire crystal sits flat over the dial, matching the genuine 4233 profile rather than the domed crystals seen on sport Rolex references. The screw-down caseback carries the Rolex coronet engraving along with the Cellini reference markings. Water resistance holds at 30 meters, consistent with the original Cellini Danaos dress watch specification.

Dial & Markers

White Lacquer Dial with Applied Roman Numerals

The white lacquer dial on this Cellini Danaos 4233 super clone matches the egg-shell white tone and gloss depth of the genuine reference under direct light. Applied yellow gold-tone Roman numerals mark each hour, paired with a slim minute track along the outer rehaut. The dial surface holds zero visible texture variation across the face, preserving the clean dress-watch aesthetic of the original 4233.

Rolex Coronet and Cellini Signature

The applied yellow gold-tone Rolex coronet sits at 12 o’clock with crisp edges and balanced proportions. The “Rolex” wordmark and “Cellini” script print directly beneath the coronet in the original typography. The “Swiss Made” hallmark appears at the dial base, completing the Cellini Danaos 4233 dial signature layout exactly as the genuine reference carries it.

Dauphine Hands and Central Seconds

Polished yellow gold-tone dauphine hour and minute hands sweep across the dial with the proportions of the original 4233. The slim central seconds hand carries a matching yellow gold-tone finish. The faceted dauphine profile catches light along the polished spine, a finishing detail that separates the Cellini Danaos 4233 from sport Rolex references using Mercedes or stick hands.

Movement & Specifications

Swiss-Grade Automatic Movement | Clone of Rolex Caliber 1602 Footprint

The Cellini Danaos 4233 super clone runs on a Swiss-grade automatic movement engineered to match the case footprint and slim profile of the genuine Rolex Caliber 1602 the original 4233 used. The movement operates at 28,800 vibrations per hour, holds 48 hours of power reserve, and drives the hours, minutes, and central seconds the dress watch configuration requires.

 Accuracy and Finishing

Daily deviation holds within -5 to +10 seconds per day after factory regulation. The movement receives Côtes de Genève striping on the bridges, perlage on the mainplate, and circular graining on the oscillating weight. The solid screw-down caseback of the Cellini Danaos 4233 super clone conceals the movement from view, matching the genuine reference where Rolex uses a closed caseback rather than an exhibition display.

The movement specifications of this Cellini Danaos 4233 super clone are listed below.

TypeAutomatic (time-only, central seconds)
Frequency28,800 vph (4 Hz)
Power Reserve48 hours
Jewels27
WindingBidirectional automatic rotor
Regulation-5 to +10 seconds per day
Strap & Buckle

 Genuine Leather Strap and 18k Gold-Tone Pin Buckle

The Cellini Danaos 4233 super clone ships on a genuine leather strap finished in black with subtle padded stitching that follows the original Rolex Cellini specifications. The 18mm strap width at the lugs tapers to a 16mm buckle end, holding the dress watch silhouette across the wrist. The leather lining sits soft against the skin for all-day office and evening wear.

Wrist Feel, Weight and Fit

The Cellini Danaos 4233 super clone weighs approximately 75 grams on the strap, light enough to disappear into the wrist after the first hour of wear. The 38mm case and 44mm lug-to-lug distance suit wrists measuring 6.25 to 7.75 inches. The 9.5mm case height allows the watch to slip under a dress shirt cuff without resistance, a profile the Cellini Danaos line built its reputation on.

OUR QUALITY PROMISE

Quality Checks Before Shipping

Every timepiece deserves careful attention before it reaches you. Before dispatch, each watch undergoes a visual inspection to review its overall appearance, finishing, and key components.

Visual Inspection

Checking the overall appearance, dial and finishing.

Component Review

Reviewing hands, case, bracelet and clasp.

Final Review

A final check before careful packaging and dispatch.

shopping with confidence

THE ELITE EXPERIENCE

A Better Way to Shop for Timepieces

Enjoy a more reassuring shopping experience with thoughtful service, added protection and convenient delivery with every order.

1-Year Warranty

Added peace of mind with 1-year warranty coverage.

Free Shipping

Complimentary shipping on your order.

Careful Packaging

Carefully packed to help protect your order during transit.