Rolex Cellini Geneve 5320/8 Yellow Gold White Dial Super Clone : Swiss-Grade Dress Watch with Articulating Lugs

$ 1,299

4-Stage QC

Verified factory

Insured Shipping

DHL · FedEx · 5–10 days

1-Year Warranty

Parts + servicing

Discreet Packaging

Signature required

SSL Secure

Description

Rolex Cellini Geneve 5320/8 Yellow Gold White Dial Super Clone : Swiss-Grade Dress Watch with Articulating Lugs Overview

The Rolex Cellini Geneve 5320/8 Super Clone takes the most refined era of Cellini Cestello design and delivers it in a slim 32mm yellow gold-tone case with articulating lugs, white lacquer Roman-numeral dial, and a Swiss-grade manual-wind caliber. This Cellini 5320/8 Super Clone follows the dress-watch grammar Rolex set with the Cellini line from 1968 through its 2023 discontinuation, finished by a verified partner factory at the 98% accuracy mark. The price of $1,299 holds the watch in the dress-tier Rolex super clone segment alongside the Cellini Danaos and the Cellini Prince references.

The 4 tabs below cover the case, dial, movement, and strap attributes of the Cellini 5320/8 Super Clone in detail.

Case & Crystal

32mm Cestello Case in Yellow Gold-Tone Finish

The Cellini 5320/8 Super Clone features a 32mm round Cestello case measuring 6mm in thickness, machined from 316L stainless steel and finished with high-grade 18k yellow gold PVD plating for long-term color retention. The slim 6mm profile slides under a shirt cuff with the dress-watch discretion that defines the Cellini line, and the yellow gold tone holds the warm Florentine character Rolex named the collection after Benvenuto Cellini for. The case carries the smooth bezel with a fine fluted-edge transition that separates the Cestello from the engine-turned Cellini variants.

Articulating Lugs and Wrist Ergonomics

The Cestello-style articulating lugs are the defining attribute of the 5320/8, and this super clone reproduces the hinged geometry that lets the case follow the wrist curve on smaller and larger sizes alike. Each lug pivots at the case junction with the precision tolerance the genuine Rolex Cestello holds, removing the rigid-bar feel that flat-lug dress watches carry. The articulating design sits flush on wrists from 5.5 inches to 7.25 inches, addressing the unisex wrist-fit range Rolex targeted with the Cestello series from 1995 onward.

 Sapphire Crystal and Solid Caseback

The Cellini 5320/8 Super Clone uses a scratch-resistant sapphire crystal that sits flat over the white lacquer dial without a cyclops magnifier, preserving the dress-watch dial symmetry. The solid yellow gold-tone caseback follows the Cellini tradition of a closed back rather than an exhibition window, sealing the manual-wind movement against dust and moisture. The case carries 30 meters of water resistance through the screw-down caseback and the push-pull crown engineered for dress-watch wear rather than aquatic use.

Dial & Markers

White Lacquer Dial with Applied Roman Numerals

The white lacquer dial on the Cellini 5320/8 Super Clone features applied yellow gold-tone Roman numerals at every hour position, a layout drawn from the dress-watch heritage Rolex named the Cellini line for in 1968. Clean Factory applies the lacquer in 3 successive passes for the deep white tone the genuine Cellini Cestello dials hold, then fits each Roman numeral by hand under microscope alignment. The dial reads with high contrast at every angle, with the polished gold numerals catching ambient light against the matte white background.

Applied Rolex Coronet and Cellini Script

The applied yellow gold-tone Rolex coronet sits at 12 o’clock above the printed “Rolex” wordmark, with the “Cellini” line in matte black script below the coronet and “Geneve” centered above the 6 o’clock position. The “Swiss Made” text sits at the dial edge below the 6 o’clock Roman numeral in the font weight Rolex used on the Cellini dial range. The dial follows the time-only Cellini design language without a date window or sub-dial, preserving the symmetry that dress-watch collectors associate with the Cestello reference.

Yellow Gold Dauphine Hands

Polished yellow gold-tone dauphine hour and minute hands carry the faceted geometry the Cellini line standardized, delivering the bright reflection that catches light against the white dial. The slim profile of the dauphine hand reads with high precision against the applied Roman numerals at every position. The dial carries no second hand and no luminous fill, holding the pure dress-watch aesthetic that separates the Cellini from the Oyster sport line.

Movement & Specifications

Swiss-Grade Manual-Wind Clone of Caliber 1602

The Cellini 5320/8 Super Clone runs on a Swiss-grade manual-wind clone caliber built to the architecture of the genuine Rolex Caliber 1602 that powered the Cellini Cestello range. The movement operates at 28,800 vibrations per hour, holds 42 hours of power reserve on a full wind, and drives the hour and minute hands through a 19-jewel gear train. The clone caliber sources from VSF, the partner factory rated for the highest movement precision in the super clone segment.

 Accuracy and Daily Performance

Daily deviation on the Cellini 5320/8 Super Clone holds within -5 to +10 seconds per day after factory regulation in 4 positions. The movement passes timegrapher validation before shipping, with the beat rate, amplitude, and isochronism logged on a serial-linked QC card. The manual-wind ritual delivers the daily owner interaction dress-watch collectors associate with traditional Swiss watchmaking, replacing the rotor sweep of automatic calibers with a direct mainspring connection.

Movement Specifications:

TypeSwiss-grade manual-wind
Base ArchitectureRolex Caliber 1602
Frequency28,800 vph (4 Hz)
Power Reserve42 hours
Jewels19
WindingManual
HairspringFlat balance spring
Strap & Buckle

 Black Leather Strap with Hand-Stitched Edges

The Cellini 5320/8 Super Clone ships on a black calf leather strap measuring 16mm at the lug and tapering to 14mm at the buckle, scaled to the 32mm case width and the slim 6mm profile. Hand-stitched edges in matching black thread run the full length of the strap, with the genuine Cellini stitch count of 14 stitches per 10cm holding the dress-watch detail collectors look for. The strap thickness sits at 2.5mm at the lug end, slimming toward the buckle for a flush wrist feel under a shirt cuff.

Yellow Gold Tang Buckle and Wrist Feel

A yellow gold-tone tang buckle with the engraved Rolex coronet secures the strap on the wrist with the simple precision the Cellini line carries. The Cellini 5320/8 Super Clone weighs 48 grams approximately on the full strap, within a 4-gram margin of the genuine 18k yellow gold 5320/8 measured at 52 grams. The strap fits wrists from 5.5 inches to 7.25 inches across the 7 punched holes, with the articulating lugs delivering the curve compliance that flat-lug dress watches miss.

32mm Cestello Case in Yellow Gold-Tone Finish

The Cellini 5320/8 Super Clone features a 32mm round Cestello case measuring 6mm in thickness, machined from 316L stainless steel and finished with high-grade 18k yellow gold PVD plating for long-term color retention. The slim 6mm profile slides under a shirt cuff with the dress-watch discretion that defines the Cellini line, and the yellow gold tone holds the warm Florentine character Rolex named the collection after Benvenuto Cellini for. The case carries the smooth bezel with a fine fluted-edge transition that separates the Cestello from the engine-turned Cellini variants.

Articulating Lugs and Wrist Ergonomics

The Cestello-style articulating lugs are the defining attribute of the 5320/8, and this super clone reproduces the hinged geometry that lets the case follow the wrist curve on smaller and larger sizes alike. Each lug pivots at the case junction with the precision tolerance the genuine Rolex Cestello holds, removing the rigid-bar feel that flat-lug dress watches carry. The articulating design sits flush on wrists from 5.5 inches to 7.25 inches, addressing the unisex wrist-fit range Rolex targeted with the Cestello series from 1995 onward.

 Sapphire Crystal and Solid Caseback

The Cellini 5320/8 Super Clone uses a scratch-resistant sapphire crystal that sits flat over the white lacquer dial without a cyclops magnifier, preserving the dress-watch dial symmetry. The solid yellow gold-tone caseback follows the Cellini tradition of a closed back rather than an exhibition window, sealing the manual-wind movement against dust and moisture. The case carries 30 meters of water resistance through the screw-down caseback and the push-pull crown engineered for dress-watch wear rather than aquatic use.

White Lacquer Dial with Applied Roman Numerals

The white lacquer dial on the Cellini 5320/8 Super Clone features applied yellow gold-tone Roman numerals at every hour position, a layout drawn from the dress-watch heritage Rolex named the Cellini line for in 1968. Clean Factory applies the lacquer in 3 successive passes for the deep white tone the genuine Cellini Cestello dials hold, then fits each Roman numeral by hand under microscope alignment. The dial reads with high contrast at every angle, with the polished gold numerals catching ambient light against the matte white background.

Applied Rolex Coronet and Cellini Script

The applied yellow gold-tone Rolex coronet sits at 12 o’clock above the printed “Rolex” wordmark, with the “Cellini” line in matte black script below the coronet and “Geneve” centered above the 6 o’clock position. The “Swiss Made” text sits at the dial edge below the 6 o’clock Roman numeral in the font weight Rolex used on the Cellini dial range. The dial follows the time-only Cellini design language without a date window or sub-dial, preserving the symmetry that dress-watch collectors associate with the Cestello reference.

Yellow Gold Dauphine Hands

Polished yellow gold-tone dauphine hour and minute hands carry the faceted geometry the Cellini line standardized, delivering the bright reflection that catches light against the white dial. The slim profile of the dauphine hand reads with high precision against the applied Roman numerals at every position. The dial carries no second hand and no luminous fill, holding the pure dress-watch aesthetic that separates the Cellini from the Oyster sport line.

Swiss-Grade Manual-Wind Clone of Caliber 1602

The Cellini 5320/8 Super Clone runs on a Swiss-grade manual-wind clone caliber built to the architecture of the genuine Rolex Caliber 1602 that powered the Cellini Cestello range. The movement operates at 28,800 vibrations per hour, holds 42 hours of power reserve on a full wind, and drives the hour and minute hands through a 19-jewel gear train. The clone caliber sources from VSF, the partner factory rated for the highest movement precision in the super clone segment.

 Accuracy and Daily Performance

Daily deviation on the Cellini 5320/8 Super Clone holds within -5 to +10 seconds per day after factory regulation in 4 positions. The movement passes timegrapher validation before shipping, with the beat rate, amplitude, and isochronism logged on a serial-linked QC card. The manual-wind ritual delivers the daily owner interaction dress-watch collectors associate with traditional Swiss watchmaking, replacing the rotor sweep of automatic calibers with a direct mainspring connection.

Movement Specifications:

TypeSwiss-grade manual-wind
Base ArchitectureRolex Caliber 1602
Frequency28,800 vph (4 Hz)
Power Reserve42 hours
Jewels19
WindingManual
HairspringFlat balance spring

 Black Leather Strap with Hand-Stitched Edges

The Cellini 5320/8 Super Clone ships on a black calf leather strap measuring 16mm at the lug and tapering to 14mm at the buckle, scaled to the 32mm case width and the slim 6mm profile. Hand-stitched edges in matching black thread run the full length of the strap, with the genuine Cellini stitch count of 14 stitches per 10cm holding the dress-watch detail collectors look for. The strap thickness sits at 2.5mm at the lug end, slimming toward the buckle for a flush wrist feel under a shirt cuff.

Yellow Gold Tang Buckle and Wrist Feel

A yellow gold-tone tang buckle with the engraved Rolex coronet secures the strap on the wrist with the simple precision the Cellini line carries. The Cellini 5320/8 Super Clone weighs 48 grams approximately on the full strap, within a 4-gram margin of the genuine 18k yellow gold 5320/8 measured at 52 grams. The strap fits wrists from 5.5 inches to 7.25 inches across the 7 punched holes, with the articulating lugs delivering the curve compliance that flat-lug dress watches miss.

Case & Crystal

32mm Cestello Case in Yellow Gold-Tone Finish

The Cellini 5320/8 Super Clone features a 32mm round Cestello case measuring 6mm in thickness, machined from 316L stainless steel and finished with high-grade 18k yellow gold PVD plating for long-term color retention. The slim 6mm profile slides under a shirt cuff with the dress-watch discretion that defines the Cellini line, and the yellow gold tone holds the warm Florentine character Rolex named the collection after Benvenuto Cellini for. The case carries the smooth bezel with a fine fluted-edge transition that separates the Cestello from the engine-turned Cellini variants.

Articulating Lugs and Wrist Ergonomics

The Cestello-style articulating lugs are the defining attribute of the 5320/8, and this super clone reproduces the hinged geometry that lets the case follow the wrist curve on smaller and larger sizes alike. Each lug pivots at the case junction with the precision tolerance the genuine Rolex Cestello holds, removing the rigid-bar feel that flat-lug dress watches carry. The articulating design sits flush on wrists from 5.5 inches to 7.25 inches, addressing the unisex wrist-fit range Rolex targeted with the Cestello series from 1995 onward.

 Sapphire Crystal and Solid Caseback

The Cellini 5320/8 Super Clone uses a scratch-resistant sapphire crystal that sits flat over the white lacquer dial without a cyclops magnifier, preserving the dress-watch dial symmetry. The solid yellow gold-tone caseback follows the Cellini tradition of a closed back rather than an exhibition window, sealing the manual-wind movement against dust and moisture. The case carries 30 meters of water resistance through the screw-down caseback and the push-pull crown engineered for dress-watch wear rather than aquatic use.

Dial & Markers

White Lacquer Dial with Applied Roman Numerals

The white lacquer dial on the Cellini 5320/8 Super Clone features applied yellow gold-tone Roman numerals at every hour position, a layout drawn from the dress-watch heritage Rolex named the Cellini line for in 1968. Clean Factory applies the lacquer in 3 successive passes for the deep white tone the genuine Cellini Cestello dials hold, then fits each Roman numeral by hand under microscope alignment. The dial reads with high contrast at every angle, with the polished gold numerals catching ambient light against the matte white background.

Applied Rolex Coronet and Cellini Script

The applied yellow gold-tone Rolex coronet sits at 12 o’clock above the printed “Rolex” wordmark, with the “Cellini” line in matte black script below the coronet and “Geneve” centered above the 6 o’clock position. The “Swiss Made” text sits at the dial edge below the 6 o’clock Roman numeral in the font weight Rolex used on the Cellini dial range. The dial follows the time-only Cellini design language without a date window or sub-dial, preserving the symmetry that dress-watch collectors associate with the Cestello reference.

Yellow Gold Dauphine Hands

Polished yellow gold-tone dauphine hour and minute hands carry the faceted geometry the Cellini line standardized, delivering the bright reflection that catches light against the white dial. The slim profile of the dauphine hand reads with high precision against the applied Roman numerals at every position. The dial carries no second hand and no luminous fill, holding the pure dress-watch aesthetic that separates the Cellini from the Oyster sport line.

Movement & Specifications

Swiss-Grade Manual-Wind Clone of Caliber 1602

The Cellini 5320/8 Super Clone runs on a Swiss-grade manual-wind clone caliber built to the architecture of the genuine Rolex Caliber 1602 that powered the Cellini Cestello range. The movement operates at 28,800 vibrations per hour, holds 42 hours of power reserve on a full wind, and drives the hour and minute hands through a 19-jewel gear train. The clone caliber sources from VSF, the partner factory rated for the highest movement precision in the super clone segment.

 Accuracy and Daily Performance

Daily deviation on the Cellini 5320/8 Super Clone holds within -5 to +10 seconds per day after factory regulation in 4 positions. The movement passes timegrapher validation before shipping, with the beat rate, amplitude, and isochronism logged on a serial-linked QC card. The manual-wind ritual delivers the daily owner interaction dress-watch collectors associate with traditional Swiss watchmaking, replacing the rotor sweep of automatic calibers with a direct mainspring connection.

Movement Specifications:

TypeSwiss-grade manual-wind
Base ArchitectureRolex Caliber 1602
Frequency28,800 vph (4 Hz)
Power Reserve42 hours
Jewels19
WindingManual
HairspringFlat balance spring
Strap & Buckle

 Black Leather Strap with Hand-Stitched Edges

The Cellini 5320/8 Super Clone ships on a black calf leather strap measuring 16mm at the lug and tapering to 14mm at the buckle, scaled to the 32mm case width and the slim 6mm profile. Hand-stitched edges in matching black thread run the full length of the strap, with the genuine Cellini stitch count of 14 stitches per 10cm holding the dress-watch detail collectors look for. The strap thickness sits at 2.5mm at the lug end, slimming toward the buckle for a flush wrist feel under a shirt cuff.

Yellow Gold Tang Buckle and Wrist Feel

A yellow gold-tone tang buckle with the engraved Rolex coronet secures the strap on the wrist with the simple precision the Cellini line carries. The Cellini 5320/8 Super Clone weighs 48 grams approximately on the full strap, within a 4-gram margin of the genuine 18k yellow gold 5320/8 measured at 52 grams. The strap fits wrists from 5.5 inches to 7.25 inches across the 7 punched holes, with the articulating lugs delivering the curve compliance that flat-lug dress watches miss.

OUR QUALITY PROMISE

Quality Checks Before Shipping

Every timepiece deserves careful attention before it reaches you. Before dispatch, each watch undergoes a visual inspection to review its overall appearance, finishing, and key components.

Visual Inspection

Checking the overall appearance, dial and finishing.

Component Review

Reviewing hands, case, bracelet and clasp.

Final Review

A final check before careful packaging and dispatch.

shopping with confidence

THE ELITE EXPERIENCE

A Better Way to Shop for Timepieces

Enjoy a more reassuring shopping experience with thoughtful service, added protection and convenient delivery with every order.

1-Year Warranty

Added peace of mind with 1-year warranty coverage.

Free Shipping

Complimentary shipping on your order.

Careful Packaging

Carefully packed to help protect your order during transit.