Rolex Datejust II 116334 Super Clone : Iced Out Diamond Pave Dial 41mm

The Rolex Datejust II 116334 super clone features the 41mm white Rolesor dress watch paired with an 18k white gold fluted bezel and a fully iced-out pave dial set with high-grade simulated diamonds, finished to 98% visual and dimensional parity with the genuine reference. This Datejust II 116334 Super Clone carries simulated diamond hour markers and a date at 3 o’clock under a Cyclops lens on a steel Jubilee bracelet, priced at $1,699 against a genuine pre-owned market figure near $13,500.

This iced-out Datejust II Super Clone uses a polished Oystersteel case, an 18k white gold fluted bezel, and a five-link Jubilee bracelet with a folding Oysterclasp. The dial carries a full pave of high-grade simulated diamonds across its surface, with simulated diamond hour markers framing the time display. A Swiss-grade clone of Rolex Caliber 3136 drives the timekeeping at 28,800 vibrations per hour with a roughly 48-hour power reserve. The 116334 ran in the Rolex catalogue from about 2009 to 2016 as the 41mm Datejust II, and this super clone matches the case proportions and the dial layout of that production run. The watch ships from a top-tier specialist factory with a full quality control pass, insured worldwide delivery, and a 1-year limited warranty.

Reference 116334
Case 41mm × 12mm, Oystersteel
Dial Iced-out simulated diamond pave
Movement Swiss-grade Caliber 3136 clone, automatic
Power Reserve Approximately 48 hours
Frequency 28,800 vph (4 Hz)
Water Res. 100 meters
Crystal Sapphire with Cyclops date lens, anti-reflective coating
Bezel 18k white gold fluted, mirror-polished
Bracelet Jubilee, five-piece links, folding Oysterclasp
Functions Hours, minutes, seconds, date

$ 1,299

4-Stage QC

Verified factory

Insured Shipping

DHL · FedEx · 5–10 days

1-Year Warranty

Parts + servicing

Discreet Packaging

Signature required

SSL Secure

Description

Rolex Datejust II 116334 Super Clone : Iced Out Diamond Pave Dial 41mm Overview

The Datejust II 116334 is the 41mm white Rolesor version of the Rolex Oyster Perpetual Datejust, built here with an 18k white gold fluted bezel and a fully iced-out simulated diamond pave dial. This super clone follows the 116334 reference with a 41mm Oystersteel case, a screw-down Twinlock crown, and the five-link Jubilee bracelet for $1,699. Every proportion, the fluted bezel cut, the diamond pave layout, and each bracelet link follow the genuine reference within tight production tolerance.

Case & Crystal

 Case, Crown and Lug Profile 41mm Oystersteel Build

The Rolex Datejust II 116334 super clone carries a 41mm Oyster case measuring 12mm thick, built on a 904L stainless steel core for accurate weight and corrosion resistance. The case uses mirror-polished surfaces across the lugs and flanks, and the larger 41mm diameter gives the 116334 the bolder wrist presence that defines the Datejust II generation. The screw-down Twinlock crown at 3 o’clock seals the case for water resistance to 100 meters.

18k White Gold Fluted Bezel

The 18k white gold fluted bezel is a defining feature of this Datejust II 116334, machined with the precise angled flutes of the genuine white Rolesor reference. The white gold fluting catches light around the dial edge and frames the iced-out pave surface with a sharp metallic contrast. This super clone follows the genuine flute count, depth, and polish so the bezel reads correctly under close inspection.

Sapphire Crystal, Cyclops Lens and Caseback

Scratch-resistant sapphire crystal with anti-reflective coating covers the pave dial and carries a Cyclops magnification lens over the date aperture at 3 o’clock. The Cyclops lens enlarges the date by 2.5 times for quick reading, a signature detail of the Datejust line since 1953. The solid screw-down caseback seals the Caliber 3136 clone movement and supports the 100-meter water resistance rating of the Datejust.

Dial & Markers

Iced Out Simulated Diamond Pave Dial

The pave dial of this Datejust II 116334 super clone carries a full setting of high-grade simulated diamonds across its entire surface for the fully iced-out look that defines this listing. The simulated stones are hand-set in a tight pave pattern that covers the dial from edge to edge with a continuous field of light. Every diamond on this dial is a high-grade simulated stone selected for cut consistency and brightness, not a mined diamond. This super clone matches the pave density, the stone size, and the dial layout of the genuine iced-out 116334.

Simulated Diamond Hour Markers and Hands

The Datejust II 116334 carries simulated diamond hour markers set into the pave field to mark the hours against the iced-out surface. The markers use the same high-grade simulated stones as the dial pave, sized and placed to match the genuine reference. The central hour, minute, and seconds hands follow the genuine 116334 in shape and length, finished in white gold tone to read clearly against the bright pave dial.

Logo, Text and Symmetry

The applied Rolex coronet sits at 12 o’clock, with “Rolex Oyster Perpetual Datejust” printed across the dial in fine text. The print stays crisp against the diamond pave surface, and the line spacing follows the genuine 116334 layout. The iced-out pave dial, the 18k white gold fluted bezel, and the polished steel case give the 116334 a high-impact face that holds attention in any setting.

Movement & Specifications

Swiss-Grade Caliber 3136 Clone Movement

The Rolex Datejust II 116334 super clone runs on a Swiss-grade automatic movement engineered to match the genuine Rolex Caliber 3136 in feel, frequency, and autonomy. The movement operates at 28,800 vibrations per hour, winds bidirectionally through a free-rotating rotor, and holds a power reserve of approximately 48 hours for two days off the wrist. The caliber drives the central hours, minutes, seconds, and the date at 3 o’clock.

 Accuracy and Daily Performance

Daily deviation holds within -5 to +8 seconds per day after factory regulation, close to the chronometer standard of the genuine Caliber 3136. The smooth sweeping seconds hand and the quiet rotor confirm the Swiss-grade build. The 100-meter water resistance and the screw-down Twinlock crown let the 116334 super clone hold its seal through daily wear, hand washing, and light water contact.

Spec grid:

TypeAutomatic, self-winding
Frequency28,800 vph (4 Hz)
Power ReserveApproximately 48 hours
Jewels31
WindingAutomatic bidirectional
FunctionsHours, minutes, seconds, date
Bracelet & Clasp

 Steel Jubilee Bracelet and Folding Oysterclasp

The Datejust II 116334 super clone carries the Jubilee bracelet, the five-piece-link design Rolex pairs with the white Rolesor Datejust II. The bracelet uses an Oystersteel finish with brushed outer links and polished center links, tapering smoothly from the lugs toward the wrist. A concealed folding Oysterclasp closes flush against the wrist for a secure hold. The Datejust uses the Jubilee bracelet or the Oyster bracelet and never a President bracelet.

Wrist Feel, Sizing and Comfort

The watch weighs approximately 155 grams on the full Jubilee bracelet, giving the substantial wrist presence buyers expect from a 41mm Datejust II. The larger 41mm case carries the iced-out pave dial with strong visual weight while the 12mm profile still slides under a shirt cuff. The Datejust II 116334 sits comfortably on wrists from 6.5 to 8 inches.

 Case, Crown and Lug Profile 41mm Oystersteel Build

The Rolex Datejust II 116334 super clone carries a 41mm Oyster case measuring 12mm thick, built on a 904L stainless steel core for accurate weight and corrosion resistance. The case uses mirror-polished surfaces across the lugs and flanks, and the larger 41mm diameter gives the 116334 the bolder wrist presence that defines the Datejust II generation. The screw-down Twinlock crown at 3 o’clock seals the case for water resistance to 100 meters.

18k White Gold Fluted Bezel

The 18k white gold fluted bezel is a defining feature of this Datejust II 116334, machined with the precise angled flutes of the genuine white Rolesor reference. The white gold fluting catches light around the dial edge and frames the iced-out pave surface with a sharp metallic contrast. This super clone follows the genuine flute count, depth, and polish so the bezel reads correctly under close inspection.

Sapphire Crystal, Cyclops Lens and Caseback

Scratch-resistant sapphire crystal with anti-reflective coating covers the pave dial and carries a Cyclops magnification lens over the date aperture at 3 o’clock. The Cyclops lens enlarges the date by 2.5 times for quick reading, a signature detail of the Datejust line since 1953. The solid screw-down caseback seals the Caliber 3136 clone movement and supports the 100-meter water resistance rating of the Datejust.

Iced Out Simulated Diamond Pave Dial

The pave dial of this Datejust II 116334 super clone carries a full setting of high-grade simulated diamonds across its entire surface for the fully iced-out look that defines this listing. The simulated stones are hand-set in a tight pave pattern that covers the dial from edge to edge with a continuous field of light. Every diamond on this dial is a high-grade simulated stone selected for cut consistency and brightness, not a mined diamond. This super clone matches the pave density, the stone size, and the dial layout of the genuine iced-out 116334.

Simulated Diamond Hour Markers and Hands

The Datejust II 116334 carries simulated diamond hour markers set into the pave field to mark the hours against the iced-out surface. The markers use the same high-grade simulated stones as the dial pave, sized and placed to match the genuine reference. The central hour, minute, and seconds hands follow the genuine 116334 in shape and length, finished in white gold tone to read clearly against the bright pave dial.

Logo, Text and Symmetry

The applied Rolex coronet sits at 12 o’clock, with “Rolex Oyster Perpetual Datejust” printed across the dial in fine text. The print stays crisp against the diamond pave surface, and the line spacing follows the genuine 116334 layout. The iced-out pave dial, the 18k white gold fluted bezel, and the polished steel case give the 116334 a high-impact face that holds attention in any setting.

Swiss-Grade Caliber 3136 Clone Movement

The Rolex Datejust II 116334 super clone runs on a Swiss-grade automatic movement engineered to match the genuine Rolex Caliber 3136 in feel, frequency, and autonomy. The movement operates at 28,800 vibrations per hour, winds bidirectionally through a free-rotating rotor, and holds a power reserve of approximately 48 hours for two days off the wrist. The caliber drives the central hours, minutes, seconds, and the date at 3 o’clock.

 Accuracy and Daily Performance

Daily deviation holds within -5 to +8 seconds per day after factory regulation, close to the chronometer standard of the genuine Caliber 3136. The smooth sweeping seconds hand and the quiet rotor confirm the Swiss-grade build. The 100-meter water resistance and the screw-down Twinlock crown let the 116334 super clone hold its seal through daily wear, hand washing, and light water contact.

Spec grid:

TypeAutomatic, self-winding
Frequency28,800 vph (4 Hz)
Power ReserveApproximately 48 hours
Jewels31
WindingAutomatic bidirectional
FunctionsHours, minutes, seconds, date

 Steel Jubilee Bracelet and Folding Oysterclasp

The Datejust II 116334 super clone carries the Jubilee bracelet, the five-piece-link design Rolex pairs with the white Rolesor Datejust II. The bracelet uses an Oystersteel finish with brushed outer links and polished center links, tapering smoothly from the lugs toward the wrist. A concealed folding Oysterclasp closes flush against the wrist for a secure hold. The Datejust uses the Jubilee bracelet or the Oyster bracelet and never a President bracelet.

Wrist Feel, Sizing and Comfort

The watch weighs approximately 155 grams on the full Jubilee bracelet, giving the substantial wrist presence buyers expect from a 41mm Datejust II. The larger 41mm case carries the iced-out pave dial with strong visual weight while the 12mm profile still slides under a shirt cuff. The Datejust II 116334 sits comfortably on wrists from 6.5 to 8 inches.

Case & Crystal

 Case, Crown and Lug Profile 41mm Oystersteel Build

The Rolex Datejust II 116334 super clone carries a 41mm Oyster case measuring 12mm thick, built on a 904L stainless steel core for accurate weight and corrosion resistance. The case uses mirror-polished surfaces across the lugs and flanks, and the larger 41mm diameter gives the 116334 the bolder wrist presence that defines the Datejust II generation. The screw-down Twinlock crown at 3 o’clock seals the case for water resistance to 100 meters.

18k White Gold Fluted Bezel

The 18k white gold fluted bezel is a defining feature of this Datejust II 116334, machined with the precise angled flutes of the genuine white Rolesor reference. The white gold fluting catches light around the dial edge and frames the iced-out pave surface with a sharp metallic contrast. This super clone follows the genuine flute count, depth, and polish so the bezel reads correctly under close inspection.

Sapphire Crystal, Cyclops Lens and Caseback

Scratch-resistant sapphire crystal with anti-reflective coating covers the pave dial and carries a Cyclops magnification lens over the date aperture at 3 o’clock. The Cyclops lens enlarges the date by 2.5 times for quick reading, a signature detail of the Datejust line since 1953. The solid screw-down caseback seals the Caliber 3136 clone movement and supports the 100-meter water resistance rating of the Datejust.

Dial & Markers

Iced Out Simulated Diamond Pave Dial

The pave dial of this Datejust II 116334 super clone carries a full setting of high-grade simulated diamonds across its entire surface for the fully iced-out look that defines this listing. The simulated stones are hand-set in a tight pave pattern that covers the dial from edge to edge with a continuous field of light. Every diamond on this dial is a high-grade simulated stone selected for cut consistency and brightness, not a mined diamond. This super clone matches the pave density, the stone size, and the dial layout of the genuine iced-out 116334.

Simulated Diamond Hour Markers and Hands

The Datejust II 116334 carries simulated diamond hour markers set into the pave field to mark the hours against the iced-out surface. The markers use the same high-grade simulated stones as the dial pave, sized and placed to match the genuine reference. The central hour, minute, and seconds hands follow the genuine 116334 in shape and length, finished in white gold tone to read clearly against the bright pave dial.

Logo, Text and Symmetry

The applied Rolex coronet sits at 12 o’clock, with “Rolex Oyster Perpetual Datejust” printed across the dial in fine text. The print stays crisp against the diamond pave surface, and the line spacing follows the genuine 116334 layout. The iced-out pave dial, the 18k white gold fluted bezel, and the polished steel case give the 116334 a high-impact face that holds attention in any setting.

Movement & Specifications

Swiss-Grade Caliber 3136 Clone Movement

The Rolex Datejust II 116334 super clone runs on a Swiss-grade automatic movement engineered to match the genuine Rolex Caliber 3136 in feel, frequency, and autonomy. The movement operates at 28,800 vibrations per hour, winds bidirectionally through a free-rotating rotor, and holds a power reserve of approximately 48 hours for two days off the wrist. The caliber drives the central hours, minutes, seconds, and the date at 3 o’clock.

 Accuracy and Daily Performance

Daily deviation holds within -5 to +8 seconds per day after factory regulation, close to the chronometer standard of the genuine Caliber 3136. The smooth sweeping seconds hand and the quiet rotor confirm the Swiss-grade build. The 100-meter water resistance and the screw-down Twinlock crown let the 116334 super clone hold its seal through daily wear, hand washing, and light water contact.

Spec grid:

TypeAutomatic, self-winding
Frequency28,800 vph (4 Hz)
Power ReserveApproximately 48 hours
Jewels31
WindingAutomatic bidirectional
FunctionsHours, minutes, seconds, date
Bracelet & Clasp

 Steel Jubilee Bracelet and Folding Oysterclasp

The Datejust II 116334 super clone carries the Jubilee bracelet, the five-piece-link design Rolex pairs with the white Rolesor Datejust II. The bracelet uses an Oystersteel finish with brushed outer links and polished center links, tapering smoothly from the lugs toward the wrist. A concealed folding Oysterclasp closes flush against the wrist for a secure hold. The Datejust uses the Jubilee bracelet or the Oyster bracelet and never a President bracelet.

Wrist Feel, Sizing and Comfort

The watch weighs approximately 155 grams on the full Jubilee bracelet, giving the substantial wrist presence buyers expect from a 41mm Datejust II. The larger 41mm case carries the iced-out pave dial with strong visual weight while the 12mm profile still slides under a shirt cuff. The Datejust II 116334 sits comfortably on wrists from 6.5 to 8 inches.

OUR QUALITY PROMISE

Quality Checks Before Shipping

Every timepiece deserves careful attention before it reaches you. Before dispatch, each watch undergoes a visual inspection to review its overall appearance, finishing, and key components.

Visual Inspection

Checking the overall appearance, dial and finishing.

Component Review

Reviewing hands, case, bracelet and clasp.

Final Review

A final check before careful packaging and dispatch.

shopping with confidence

THE ELITE EXPERIENCE

A Better Way to Shop for Timepieces

Enjoy a more reassuring shopping experience with thoughtful service, added protection and convenient delivery with every order.

1-Year Warranty

Added peace of mind with 1-year warranty coverage.

Free Shipping

Complimentary shipping on your order.

Careful Packaging

Carefully packed to help protect your order during transit.