Rolex Datejust II 116625 Super Clone : Yellow Rolesor Iced-Out Diamond Dial 41mm

The Rolex Datejust II 116625 super clone features a 41mm yellow Rolesor case paired with a simulated-diamond-set bezel and a full pave simulated-diamond dial, finished to 98% visual and dimensional parity with a genuine iced-out two-tone Datejust II. This Datejust II 116625 Super Clone carries a date at 3 o’clock under a Cyclops lens and a two-tone Oystersteel-and-yellow-gold Oyster bracelet, priced at $1,699 against a comparable genuine market figure near $32,000.

This iced-out Datejust II Super Clone combines an Oystersteel case with 18k yellow gold on the bezel surround, crown, and bracelet center links for the warm two-tone yellow Rolesor look. The diamond-set bezel and the pave dial use high-grade simulated stones cut and set for even sparkle and accurate light return. A Swiss-grade clone of Rolex Caliber 3136 drives the timekeeping at 28,800 vibrations per hour with a roughly 48-hour power reserve. The Datejust II ran as the 41mm Datejust from about 2009 to 2016, and this super clone matches the larger case proportions and the dial layout of that production run. The watch ships from a top-tier specialist factory with a full quality control pass, insured worldwide delivery, and a 1-year limited warranty.

Reference 116625
Case 41mm × 12mm, yellow Rolesor
Dial Pave simulated diamond, iced-out bezel
Movement Swiss-grade Caliber 3136 clone, automatic
Power Reserve Approximately 48 hours
Frequency 28,800 vph (4 Hz)
Water Res. 100 meters
Crystal Sapphire with Cyclops date lens, anti-reflective coating
Bezel 18k yellow gold set with high-grade simulated diamonds
Bracelet Two-tone Oyster, three-piece links, folding Oysterclasp
Functions Hours, minutes, seconds, date

$ 1,299

4-Stage QC

Verified factory

Insured Shipping

DHL · FedEx · 5–10 days

1-Year Warranty

Parts + servicing

Discreet Packaging

Signature required

SSL Secure

Description

Rolex Datejust II 116625 Super Clone : Yellow Rolesor Iced-Out Diamond Dial 41mm Overview

The Datejust II 116625 is the 41mm yellow Rolesor version of the Rolex Datejust, built here fully iced out with a simulated-diamond bezel and a pave simulated-diamond dial. This super clone follows the Datejust II format with a 41mm Oystersteel case, 18k yellow gold accents, a screw-down Twinlock crown, and a two-tone Oyster bracelet for $1,699. Every proportion, the diamond setting pattern, and each bracelet link follow the genuine two-tone Datejust II within tight production tolerance.

Case & Crystal

Case, Crown and Lug Profile 41mm Yellow Rolesor Build

The Rolex Datejust II 116625 super clone carries a 41mm Oyster case measuring 12mm thick, built on a 904L stainless steel core for accurate weight and corrosion resistance. The case uses mirror-polished surfaces across the lugs and flanks, and the 41mm diameter gives the Datejust II a larger, bolder wrist presence than the classic 36mm Datejust. The screw-down Twinlock crown at 3 o’clock carries an 18k yellow gold finish and seals the case for water resistance to 100 meters.

18k Yellow Gold Bezel Set with Simulated Diamonds

The diamond-set bezel is the defining feature of this iced-out Datejust II 116625, finished in 18k yellow gold and set with high-grade simulated diamonds around the full circumference. The simulated stones are cut and seated for even spacing and consistent light return, so the bezel sparkles cleanly from every angle. This super clone uses high-grade simulated diamonds rather than mined diamonds, which keeps the iced-out look while holding the $1,699 price.

Sapphire Crystal, Cyclops Lens and Caseback

Scratch-resistant sapphire crystal with anti-reflective coating covers the pave dial and carries a Cyclops magnification lens over the date aperture at 3 o’clock. The Cyclops lens enlarges the date by 2.5 times for quick reading, a signature detail of the Datejust line since 1953. The solid screw-down caseback seals the Caliber 3136 clone movement and supports the 100-meter water resistance rating of the Datejust II.

Dial & Markers

Pave Simulated-Diamond Dial

The dial of this Datejust II 116625 super clone carries a full pave surface of high-grade simulated diamonds set across the face for an iced-out finish. The pave stones are seated in a tight, even pattern that catches light across the whole dial while keeping the time readable. This super clone uses simulated diamonds, not mined stones, and matches the setting density and the dial layout of a genuine pave two-tone Datejust II.

Hands and Hour Markers

The Datejust II 116625 carries gold-tone baton hands and applied hour markers that read clearly against the bright pave dial. The marker placement and the hand proportions follow the genuine 41mm Datejust II layout. The central hour, minute, and seconds hands match the reference in shape and length, and the gold tone ties the dial to the yellow Rolesor case and bracelet.

Logo, Text and Symmetry

The applied Rolex coronet sits at 12 o’clock, with “Rolex Oyster Perpetual Datejust” printed across the dial in fine text. The print stays crisp against the pave surface, and the line spacing follows the genuine Datejust II layout. The pave diamond dial, the simulated-diamond bezel, and the two-tone yellow gold case give the 116625 a full iced-out face that suits statement wear and evening occasions.

Movement & Specifications

Swiss-Grade Caliber 3136 Clone Movement

The Rolex Datejust II 116625 super clone runs on a Swiss-grade automatic movement engineered to match the genuine Rolex Caliber 3136 in feel, frequency, and autonomy. The movement operates at 28,800 vibrations per hour, winds bidirectionally through a free-rotating rotor, and holds a power reserve of approximately 48 hours for two days off the wrist. The caliber drives the central hours, minutes, seconds, and the date at 3 o’clock.

Accuracy and Daily Performance

Daily deviation holds within -5 to +8 seconds per day after factory regulation, close to the chronometer standard of the genuine Caliber 3136. The smooth sweeping seconds hand and the quiet rotor confirm the Swiss-grade build of the Datejust II 116625. The 100-meter water resistance and the screw-down Twinlock crown let the watch hold its seal through daily wear, hand washing, and light water contact.

Spec grid:

TypeAutomatic, self-winding
Frequency28,800 vph (4 Hz)
Power ReserveApproximately 48 hours
Jewels31
WindingAutomatic bidirectional
FunctionsHours, minutes, seconds, date
Bracelet & Clasp

Two-Tone Oyster Bracelet and Folding Oysterclasp

The Datejust II 116625 super clone carries a two-tone Oyster bracelet, the three-piece-link design Rolex pairs with the yellow Rolesor Datejust II. The bracelet uses brushed Oystersteel outer links and polished 18k yellow gold center links, tapering smoothly from the lugs toward the wrist. A folding Oysterclasp closes flush against the wrist for a secure hold. The Datejust uses the Oyster bracelet or the Jubilee bracelet and never a President bracelet.

Wrist Feel, Sizing and Comfort

The watch weighs approximately 155 grams on the full two-tone Oyster bracelet, giving the substantial wrist presence buyers expect from a 41mm yellow Rolesor Datejust II. The 41mm case fills the wrist with a bold, visible profile while the smooth bracelet taper keeps it comfortable through the day. The Datejust II 116625 sits well on wrists from 6.5 to 8 inches.

 

Case, Crown and Lug Profile 41mm Yellow Rolesor Build

The Rolex Datejust II 116625 super clone carries a 41mm Oyster case measuring 12mm thick, built on a 904L stainless steel core for accurate weight and corrosion resistance. The case uses mirror-polished surfaces across the lugs and flanks, and the 41mm diameter gives the Datejust II a larger, bolder wrist presence than the classic 36mm Datejust. The screw-down Twinlock crown at 3 o’clock carries an 18k yellow gold finish and seals the case for water resistance to 100 meters.

18k Yellow Gold Bezel Set with Simulated Diamonds

The diamond-set bezel is the defining feature of this iced-out Datejust II 116625, finished in 18k yellow gold and set with high-grade simulated diamonds around the full circumference. The simulated stones are cut and seated for even spacing and consistent light return, so the bezel sparkles cleanly from every angle. This super clone uses high-grade simulated diamonds rather than mined diamonds, which keeps the iced-out look while holding the $1,699 price.

Sapphire Crystal, Cyclops Lens and Caseback

Scratch-resistant sapphire crystal with anti-reflective coating covers the pave dial and carries a Cyclops magnification lens over the date aperture at 3 o’clock. The Cyclops lens enlarges the date by 2.5 times for quick reading, a signature detail of the Datejust line since 1953. The solid screw-down caseback seals the Caliber 3136 clone movement and supports the 100-meter water resistance rating of the Datejust II.

Pave Simulated-Diamond Dial

The dial of this Datejust II 116625 super clone carries a full pave surface of high-grade simulated diamonds set across the face for an iced-out finish. The pave stones are seated in a tight, even pattern that catches light across the whole dial while keeping the time readable. This super clone uses simulated diamonds, not mined stones, and matches the setting density and the dial layout of a genuine pave two-tone Datejust II.

Hands and Hour Markers

The Datejust II 116625 carries gold-tone baton hands and applied hour markers that read clearly against the bright pave dial. The marker placement and the hand proportions follow the genuine 41mm Datejust II layout. The central hour, minute, and seconds hands match the reference in shape and length, and the gold tone ties the dial to the yellow Rolesor case and bracelet.

Logo, Text and Symmetry

The applied Rolex coronet sits at 12 o’clock, with “Rolex Oyster Perpetual Datejust” printed across the dial in fine text. The print stays crisp against the pave surface, and the line spacing follows the genuine Datejust II layout. The pave diamond dial, the simulated-diamond bezel, and the two-tone yellow gold case give the 116625 a full iced-out face that suits statement wear and evening occasions.

Swiss-Grade Caliber 3136 Clone Movement

The Rolex Datejust II 116625 super clone runs on a Swiss-grade automatic movement engineered to match the genuine Rolex Caliber 3136 in feel, frequency, and autonomy. The movement operates at 28,800 vibrations per hour, winds bidirectionally through a free-rotating rotor, and holds a power reserve of approximately 48 hours for two days off the wrist. The caliber drives the central hours, minutes, seconds, and the date at 3 o’clock.

Accuracy and Daily Performance

Daily deviation holds within -5 to +8 seconds per day after factory regulation, close to the chronometer standard of the genuine Caliber 3136. The smooth sweeping seconds hand and the quiet rotor confirm the Swiss-grade build of the Datejust II 116625. The 100-meter water resistance and the screw-down Twinlock crown let the watch hold its seal through daily wear, hand washing, and light water contact.

Spec grid:

TypeAutomatic, self-winding
Frequency28,800 vph (4 Hz)
Power ReserveApproximately 48 hours
Jewels31
WindingAutomatic bidirectional
FunctionsHours, minutes, seconds, date

Two-Tone Oyster Bracelet and Folding Oysterclasp

The Datejust II 116625 super clone carries a two-tone Oyster bracelet, the three-piece-link design Rolex pairs with the yellow Rolesor Datejust II. The bracelet uses brushed Oystersteel outer links and polished 18k yellow gold center links, tapering smoothly from the lugs toward the wrist. A folding Oysterclasp closes flush against the wrist for a secure hold. The Datejust uses the Oyster bracelet or the Jubilee bracelet and never a President bracelet.

Wrist Feel, Sizing and Comfort

The watch weighs approximately 155 grams on the full two-tone Oyster bracelet, giving the substantial wrist presence buyers expect from a 41mm yellow Rolesor Datejust II. The 41mm case fills the wrist with a bold, visible profile while the smooth bracelet taper keeps it comfortable through the day. The Datejust II 116625 sits well on wrists from 6.5 to 8 inches.

 

Case & Crystal

Case, Crown and Lug Profile 41mm Yellow Rolesor Build

The Rolex Datejust II 116625 super clone carries a 41mm Oyster case measuring 12mm thick, built on a 904L stainless steel core for accurate weight and corrosion resistance. The case uses mirror-polished surfaces across the lugs and flanks, and the 41mm diameter gives the Datejust II a larger, bolder wrist presence than the classic 36mm Datejust. The screw-down Twinlock crown at 3 o’clock carries an 18k yellow gold finish and seals the case for water resistance to 100 meters.

18k Yellow Gold Bezel Set with Simulated Diamonds

The diamond-set bezel is the defining feature of this iced-out Datejust II 116625, finished in 18k yellow gold and set with high-grade simulated diamonds around the full circumference. The simulated stones are cut and seated for even spacing and consistent light return, so the bezel sparkles cleanly from every angle. This super clone uses high-grade simulated diamonds rather than mined diamonds, which keeps the iced-out look while holding the $1,699 price.

Sapphire Crystal, Cyclops Lens and Caseback

Scratch-resistant sapphire crystal with anti-reflective coating covers the pave dial and carries a Cyclops magnification lens over the date aperture at 3 o’clock. The Cyclops lens enlarges the date by 2.5 times for quick reading, a signature detail of the Datejust line since 1953. The solid screw-down caseback seals the Caliber 3136 clone movement and supports the 100-meter water resistance rating of the Datejust II.

Dial & Markers

Pave Simulated-Diamond Dial

The dial of this Datejust II 116625 super clone carries a full pave surface of high-grade simulated diamonds set across the face for an iced-out finish. The pave stones are seated in a tight, even pattern that catches light across the whole dial while keeping the time readable. This super clone uses simulated diamonds, not mined stones, and matches the setting density and the dial layout of a genuine pave two-tone Datejust II.

Hands and Hour Markers

The Datejust II 116625 carries gold-tone baton hands and applied hour markers that read clearly against the bright pave dial. The marker placement and the hand proportions follow the genuine 41mm Datejust II layout. The central hour, minute, and seconds hands match the reference in shape and length, and the gold tone ties the dial to the yellow Rolesor case and bracelet.

Logo, Text and Symmetry

The applied Rolex coronet sits at 12 o’clock, with “Rolex Oyster Perpetual Datejust” printed across the dial in fine text. The print stays crisp against the pave surface, and the line spacing follows the genuine Datejust II layout. The pave diamond dial, the simulated-diamond bezel, and the two-tone yellow gold case give the 116625 a full iced-out face that suits statement wear and evening occasions.

Movement & Specifications

Swiss-Grade Caliber 3136 Clone Movement

The Rolex Datejust II 116625 super clone runs on a Swiss-grade automatic movement engineered to match the genuine Rolex Caliber 3136 in feel, frequency, and autonomy. The movement operates at 28,800 vibrations per hour, winds bidirectionally through a free-rotating rotor, and holds a power reserve of approximately 48 hours for two days off the wrist. The caliber drives the central hours, minutes, seconds, and the date at 3 o’clock.

Accuracy and Daily Performance

Daily deviation holds within -5 to +8 seconds per day after factory regulation, close to the chronometer standard of the genuine Caliber 3136. The smooth sweeping seconds hand and the quiet rotor confirm the Swiss-grade build of the Datejust II 116625. The 100-meter water resistance and the screw-down Twinlock crown let the watch hold its seal through daily wear, hand washing, and light water contact.

Spec grid:

TypeAutomatic, self-winding
Frequency28,800 vph (4 Hz)
Power ReserveApproximately 48 hours
Jewels31
WindingAutomatic bidirectional
FunctionsHours, minutes, seconds, date
Bracelet & Clasp

Two-Tone Oyster Bracelet and Folding Oysterclasp

The Datejust II 116625 super clone carries a two-tone Oyster bracelet, the three-piece-link design Rolex pairs with the yellow Rolesor Datejust II. The bracelet uses brushed Oystersteel outer links and polished 18k yellow gold center links, tapering smoothly from the lugs toward the wrist. A folding Oysterclasp closes flush against the wrist for a secure hold. The Datejust uses the Oyster bracelet or the Jubilee bracelet and never a President bracelet.

Wrist Feel, Sizing and Comfort

The watch weighs approximately 155 grams on the full two-tone Oyster bracelet, giving the substantial wrist presence buyers expect from a 41mm yellow Rolesor Datejust II. The 41mm case fills the wrist with a bold, visible profile while the smooth bracelet taper keeps it comfortable through the day. The Datejust II 116625 sits well on wrists from 6.5 to 8 inches.

 

OUR QUALITY PROMISE

Quality Checks Before Shipping

Every timepiece deserves careful attention before it reaches you. Before dispatch, each watch undergoes a visual inspection to review its overall appearance, finishing, and key components.

Visual Inspection

Checking the overall appearance, dial and finishing.

Component Review

Reviewing hands, case, bracelet and clasp.

Final Review

A final check before careful packaging and dispatch.

shopping with confidence

THE ELITE EXPERIENCE

A Better Way to Shop for Timepieces

Enjoy a more reassuring shopping experience with thoughtful service, added protection and convenient delivery with every order.

1-Year Warranty

Added peace of mind with 1-year warranty coverage.

Free Shipping

Complimentary shipping on your order.

Careful Packaging

Carefully packed to help protect your order during transit.