Rolex Daytona 116500LN Super Clone: 40mm Steel Blue Sunray Dial
The Rolex Daytona 116500LN super clone features the 40mm steel Cosmograph case paired with a blue sunray-brushed dial and a black Cerachrom ceramic bezel, finished to 98% visual and dimensional parity with the genuine reference. This 116500LN Super Clone carries three chronograph sub-dials, screw-down chronograph pushers, and a tachymetric bezel scale, priced at $1,399 against a genuine retail near $15,500.
This steel Daytona Super Clone uses an Oyster steel case, a black Cerachrom ceramic bezel with a moulded tachymetric scale, and a three-piece-link Oyster bracelet with an Oysterlock safety clasp. A Swiss-grade clone of Rolex Caliber 4130 drives the chronograph at 28,800 vibrations per hour with a 72-hour power reserve. The watch ships from a top-tier specialist factory with a full quality control pass, insured worldwide delivery, and a 1-year limited warranty.
| Reference | 116500LN |
|---|---|
| Case | 40mm × 12.4mm, Oyster steel |
| Dial | Blue sunray-brushed with three sub-dials |
| Movement | Swiss-grade Caliber 4130 clone, automatic chronograph |
| Power Reserve | 72 hours |
| Frequency | 28,800 vph (4 Hz) |
| Water Res. | 100 meters |
| Crystal | Sapphire, no Cyclops |
| Bezel | Black Cerachrom ceramic, tachymetric scale |
| Bracelet | Oyster, three-piece links, Oysterlock safety clasp |
| Functions | Hours, minutes, small seconds, chronograph |
$ 1,399
4-Stage QC
Verified factory
Insured Shipping
DHL · FedEx · 5–10 days
1-Year Warranty
Parts + servicing
Discreet Packaging
Signature required
SSL Secure
Description
Rolex Daytona 116500LN Super Clone: 40mm Steel Blue Sunray Dial Overview
The Daytona 116500LN is the steel version of the Rolex Cosmograph Daytona, configured here with a blue sunray-brushed dial and the black Cerachrom ceramic bezel. This super clone reproduces the 116500LN reference with three chronograph sub-dials, screw-down pushers, and an Oyster bracelet for $1,399. Every case angle, bezel scale marking, and sub-dial position follows the genuine reference within tight production tolerance.
Case & Crystal
Case, Pushers and Cerachrom Bezel 40mm Steel Build
The Rolex Daytona 116500LN super clone carries a 40mm Oyster case measuring 12.4mm thick, built on a 904L stainless steel core for accurate color, weight, and corrosion resistance. The case sides show the sharp polished and brushed contrast that defines the steel Daytona, and the screw-down chronograph pushers thread into the case to hold water resistance at 100 meters.
Black Cerachrom Bezel and Tachymetric Scale
The black Cerachrom ceramic bezel rings the dial with a moulded tachymetric scale that measures average speed over a fixed distance. Cerachrom is the hard ceramic Rolex introduced to the steel Daytona in 2016, and this super clone reproduces the deep black gloss and the fade-proof, scratch-resistant surface. The tachymetric numerals sit clean and evenly spaced around the bezel.
Sapphire Crystal and Caseback
Scratch-resistant sapphire crystal covers the blue sunray dial and resists daily knocks for years of clear reading. The Daytona crystal carries no Cyclops lens, since the chronograph has no date window, so the dial reads flat and unbroken. The solid screw-down caseback seals the chronograph movement and holds water resistance to 100 meters, supported by the Triplock screw-down crown.
Dial & Markers
Blue Sunray-Brushed Dial with Three Sub-Dials
The blue sunray-brushed dial of this Daytona 116500LN super clone carries a fine radial brushing that fans out from the center, so the blue shifts from bright to deep as the wrist turns under light. This sunray finish is the “sun flower” effect named in the brief, and the super clone reproduces the even radial grain across the full dial surface.
Chronograph Sub-Dial Layout
The dial holds three chronograph sub-dials in the genuine Daytona positions. The small seconds counter sits at 6 o’clock, the 30-minute chronograph counter sits at 3 o’clock, and the 12-hour chronograph counter sits at 9 o’clock. Each sub-dial carries a contrasting ring that lifts it clear of the blue surface for fast reading.
Markers, Hands and Text
The dial holds applied baton hour markers and applied hands with luminous fill for low-light legibility. The applied Rolex coronet sits at 12 o’clock, with “Rolex Oyster Perpetual Superlative Chronometer Cosmograph Daytona” printed in crisp, fine text. The central chronograph seconds hand sweeps the full dial when the chronograph runs, while the small seconds counter at 6 o’clock tracks the running movement.
Movement & Specifications
Swiss-Grade Caliber 4130 Clone Movement
The Rolex Daytona 116500LN super clone runs on a Swiss-grade automatic chronograph movement engineered to reproduce the genuine Rolex Caliber 4130 in feel, frequency, and autonomy. The movement operates at 28,800 vibrations per hour, winds bidirectionally through a free-rotating rotor, and holds a 72-hour power reserve for a full weekend off the wrist.
Chronograph Function and Accuracy
The chronograph starts, stops, and resets through the two screw-down pushers, and the central seconds hand returns cleanly to zero on reset. Daily deviation holds within -5 to +8 seconds per day after factory regulation, close to the chronometer standard of the genuine Caliber 4130. The smooth sweeping chronograph seconds hand and the quiet rotor confirm the Swiss-grade build.
Spec grid:
Bracelet & Clasp
Steel Oyster Bracelet and Oysterlock Clasp
The Daytona 116500LN super clone carries the Oyster bracelet, the flat three-piece-link steel design Rolex pairs with the steel Cosmograph. The bracelet uses a brushed-and-polished finish to match the case, with solid links that taper smoothly from the lugs toward the wrist. The folding Oysterlock safety clasp closes with a secure click and guards against accidental opening.
Wrist Feel, Weight and Comfort
The watch weighs approximately 145 grams on the full steel bracelet, giving the solid wrist presence buyers expect from a steel Daytona. The Oysterlock clasp holds the bracelet firmly and the Easylink comfort extension allows a 5mm on-the-fly adjustment. The 40mm case and tapered Oyster bracelet sit comfortably on wrists from 6.5 to 8 inches.
Case, Pushers and Cerachrom Bezel 40mm Steel Build
The Rolex Daytona 116500LN super clone carries a 40mm Oyster case measuring 12.4mm thick, built on a 904L stainless steel core for accurate color, weight, and corrosion resistance. The case sides show the sharp polished and brushed contrast that defines the steel Daytona, and the screw-down chronograph pushers thread into the case to hold water resistance at 100 meters.
Black Cerachrom Bezel and Tachymetric Scale
The black Cerachrom ceramic bezel rings the dial with a moulded tachymetric scale that measures average speed over a fixed distance. Cerachrom is the hard ceramic Rolex introduced to the steel Daytona in 2016, and this super clone reproduces the deep black gloss and the fade-proof, scratch-resistant surface. The tachymetric numerals sit clean and evenly spaced around the bezel.
Sapphire Crystal and Caseback
Scratch-resistant sapphire crystal covers the blue sunray dial and resists daily knocks for years of clear reading. The Daytona crystal carries no Cyclops lens, since the chronograph has no date window, so the dial reads flat and unbroken. The solid screw-down caseback seals the chronograph movement and holds water resistance to 100 meters, supported by the Triplock screw-down crown.
Blue Sunray-Brushed Dial with Three Sub-Dials
The blue sunray-brushed dial of this Daytona 116500LN super clone carries a fine radial brushing that fans out from the center, so the blue shifts from bright to deep as the wrist turns under light. This sunray finish is the “sun flower” effect named in the brief, and the super clone reproduces the even radial grain across the full dial surface.
Chronograph Sub-Dial Layout
The dial holds three chronograph sub-dials in the genuine Daytona positions. The small seconds counter sits at 6 o’clock, the 30-minute chronograph counter sits at 3 o’clock, and the 12-hour chronograph counter sits at 9 o’clock. Each sub-dial carries a contrasting ring that lifts it clear of the blue surface for fast reading.
Markers, Hands and Text
The dial holds applied baton hour markers and applied hands with luminous fill for low-light legibility. The applied Rolex coronet sits at 12 o’clock, with “Rolex Oyster Perpetual Superlative Chronometer Cosmograph Daytona” printed in crisp, fine text. The central chronograph seconds hand sweeps the full dial when the chronograph runs, while the small seconds counter at 6 o’clock tracks the running movement.
Swiss-Grade Caliber 4130 Clone Movement
The Rolex Daytona 116500LN super clone runs on a Swiss-grade automatic chronograph movement engineered to reproduce the genuine Rolex Caliber 4130 in feel, frequency, and autonomy. The movement operates at 28,800 vibrations per hour, winds bidirectionally through a free-rotating rotor, and holds a 72-hour power reserve for a full weekend off the wrist.
Chronograph Function and Accuracy
The chronograph starts, stops, and resets through the two screw-down pushers, and the central seconds hand returns cleanly to zero on reset. Daily deviation holds within -5 to +8 seconds per day after factory regulation, close to the chronometer standard of the genuine Caliber 4130. The smooth sweeping chronograph seconds hand and the quiet rotor confirm the Swiss-grade build.
Spec grid:
Steel Oyster Bracelet and Oysterlock Clasp
The Daytona 116500LN super clone carries the Oyster bracelet, the flat three-piece-link steel design Rolex pairs with the steel Cosmograph. The bracelet uses a brushed-and-polished finish to match the case, with solid links that taper smoothly from the lugs toward the wrist. The folding Oysterlock safety clasp closes with a secure click and guards against accidental opening.
Wrist Feel, Weight and Comfort
The watch weighs approximately 145 grams on the full steel bracelet, giving the solid wrist presence buyers expect from a steel Daytona. The Oysterlock clasp holds the bracelet firmly and the Easylink comfort extension allows a 5mm on-the-fly adjustment. The 40mm case and tapered Oyster bracelet sit comfortably on wrists from 6.5 to 8 inches.
Case & Crystal
Case, Pushers and Cerachrom Bezel 40mm Steel Build
The Rolex Daytona 116500LN super clone carries a 40mm Oyster case measuring 12.4mm thick, built on a 904L stainless steel core for accurate color, weight, and corrosion resistance. The case sides show the sharp polished and brushed contrast that defines the steel Daytona, and the screw-down chronograph pushers thread into the case to hold water resistance at 100 meters.
Black Cerachrom Bezel and Tachymetric Scale
The black Cerachrom ceramic bezel rings the dial with a moulded tachymetric scale that measures average speed over a fixed distance. Cerachrom is the hard ceramic Rolex introduced to the steel Daytona in 2016, and this super clone reproduces the deep black gloss and the fade-proof, scratch-resistant surface. The tachymetric numerals sit clean and evenly spaced around the bezel.
Sapphire Crystal and Caseback
Scratch-resistant sapphire crystal covers the blue sunray dial and resists daily knocks for years of clear reading. The Daytona crystal carries no Cyclops lens, since the chronograph has no date window, so the dial reads flat and unbroken. The solid screw-down caseback seals the chronograph movement and holds water resistance to 100 meters, supported by the Triplock screw-down crown.
Dial & Markers
Blue Sunray-Brushed Dial with Three Sub-Dials
The blue sunray-brushed dial of this Daytona 116500LN super clone carries a fine radial brushing that fans out from the center, so the blue shifts from bright to deep as the wrist turns under light. This sunray finish is the “sun flower” effect named in the brief, and the super clone reproduces the even radial grain across the full dial surface.
Chronograph Sub-Dial Layout
The dial holds three chronograph sub-dials in the genuine Daytona positions. The small seconds counter sits at 6 o’clock, the 30-minute chronograph counter sits at 3 o’clock, and the 12-hour chronograph counter sits at 9 o’clock. Each sub-dial carries a contrasting ring that lifts it clear of the blue surface for fast reading.
Markers, Hands and Text
The dial holds applied baton hour markers and applied hands with luminous fill for low-light legibility. The applied Rolex coronet sits at 12 o’clock, with “Rolex Oyster Perpetual Superlative Chronometer Cosmograph Daytona” printed in crisp, fine text. The central chronograph seconds hand sweeps the full dial when the chronograph runs, while the small seconds counter at 6 o’clock tracks the running movement.
Movement & Specifications
Swiss-Grade Caliber 4130 Clone Movement
The Rolex Daytona 116500LN super clone runs on a Swiss-grade automatic chronograph movement engineered to reproduce the genuine Rolex Caliber 4130 in feel, frequency, and autonomy. The movement operates at 28,800 vibrations per hour, winds bidirectionally through a free-rotating rotor, and holds a 72-hour power reserve for a full weekend off the wrist.
Chronograph Function and Accuracy
The chronograph starts, stops, and resets through the two screw-down pushers, and the central seconds hand returns cleanly to zero on reset. Daily deviation holds within -5 to +8 seconds per day after factory regulation, close to the chronometer standard of the genuine Caliber 4130. The smooth sweeping chronograph seconds hand and the quiet rotor confirm the Swiss-grade build.
Spec grid:
Bracelet & Clasp
Steel Oyster Bracelet and Oysterlock Clasp
The Daytona 116500LN super clone carries the Oyster bracelet, the flat three-piece-link steel design Rolex pairs with the steel Cosmograph. The bracelet uses a brushed-and-polished finish to match the case, with solid links that taper smoothly from the lugs toward the wrist. The folding Oysterlock safety clasp closes with a secure click and guards against accidental opening.
Wrist Feel, Weight and Comfort
The watch weighs approximately 145 grams on the full steel bracelet, giving the solid wrist presence buyers expect from a steel Daytona. The Oysterlock clasp holds the bracelet firmly and the Easylink comfort extension allows a 5mm on-the-fly adjustment. The 40mm case and tapered Oyster bracelet sit comfortably on wrists from 6.5 to 8 inches.
OUR QUALITY PROMISE
Quality Checks Before Shipping
Every timepiece deserves careful attention before it reaches you. Before dispatch, each watch undergoes a visual inspection to review its overall appearance, finishing, and key components.
Visual Inspection
Checking the overall appearance, dial and finishing.
Component Review
Reviewing hands, case, bracelet and clasp.
Final Review
A final check before careful packaging and dispatch.
THE ELITE EXPERIENCE
A Better Way to Shop for Timepieces
Enjoy a more reassuring shopping experience with thoughtful service, added protection and convenient delivery with every order.
1-Year Warranty
Added peace of mind with 1-year warranty coverage.
Free Shipping
Complimentary shipping on your order.
Careful Packaging
Carefully packed to help protect your order during transit.









