Rolex Daytona 116500LN Super Clone: Ceramic Bezel White Dial Steel Oyster
The Rolex Daytona 116500LN super clone features the 40mm steel Cosmograph Daytona paired with a white lacquer dial and a black Cerachrom ceramic bezel, finished to 98% visual and dimensional parity with the genuine reference. This 116500LN Super Clone carries three black chronograph sub-dials against the white dial for the classic panda contrast, priced at $1,499 against a genuine retail near $15,500.
This steel Daytona 116500LN Super Clone uses a polished and brushed 904L steel Oyster case, a black ceramic tachymetric bezel, and a steel Oyster bracelet with the Oysterlock safety clasp. A Swiss-grade clone of Rolex Caliber 4130 drives the chronograph at 28,800 vibrations per hour with a 72-hour power reserve. The watch ships from a top-tier specialist factory with a full quality control pass, insured worldwide delivery, and a 1-year limited warranty.
| Reference | 116500LN-0001 |
|---|---|
| Case | 40mm × 12.4mm, 904L steel |
| Dial | White lacquer with black sub-dials |
| Movement | Swiss-grade Caliber 4130 chronograph clone, automatic |
| Power Reserve | 72 hours |
| Frequency | 28,800 vph (4 Hz) |
| Water Res. | 100 meters |
| Crystal | Sapphire, anti-reflective coating |
| Bezel | Black Cerachrom ceramic, tachymetric scale |
| Bracelet | Steel Oyster, Oysterlock clasp with Easylink |
| Functions | Hours, minutes, small seconds, chronograph |
$ 1,499
4-Stage QC
Verified factory
Insured Shipping
DHL · FedEx · 5–10 days
1-Year Warranty
Parts + servicing
Discreet Packaging
Signature required
SSL Secure
Description
Rolex Daytona 116500LN Super Clone: Ceramic Bezel White Dial Steel Oyster Overview
The Daytona 116500LN is the steel Cosmograph Daytona with a black Cerachrom ceramic bezel, shown here with the white lacquer dial and three black chronograph sub-dials. This super clone reproduces the 116500LN-0001 reference with screw-down chronograph pushers, the steel Oyster bracelet, and the tachymetric bezel scale for $1,499. Every proportion, sub-dial position, and bracelet link follows the genuine reference within tight production tolerance.
Case & Crystal
Case, Pushers and Cerachrom Bezel 40mm Steel Build
The Rolex Daytona 116500LN super clone carries a 40mm Oyster case measuring 12.4mm thick, machined from 904L stainless steel for accurate weight and corrosion resistance. The case mixes brushed surfaces on the lugs with polished flanks, matching the genuine steel Daytona finishing. Screw-down chronograph pushers flank the screw-down Triplock crown at 3 o’clock and keep the case sealed during chronograph use.
Black Cerachrom Bezel and Tachymetric Scale
The black Cerachrom ceramic bezel rings the dial with an engraved tachymetric scale for measuring average speed over distance. Cerachrom is the corrosion-proof and fade-proof ceramic Rolex introduced on the steel Daytona in 2016, and this super clone reproduces the deep black ceramic with a recessed, light-filled numeral track. The fixed bezel resists scratches and holds its color through years of daily wear.
Sapphire Crystal and Caseback
Scratch-resistant sapphire crystal with anti-reflective coating covers the white dial and keeps the chronograph readout clear in direct light. The flat crystal sits without a date magnifier, true to the no-date Daytona layout. The solid screw-down caseback seals the Caliber 4130 clone movement and holds w
Dial & Markers
White Lacquer Dial with Black Chronograph Sub-Dials
The white lacquer dial of this Daytona 116500LN super clone carries a clean, bright white surface that frames the three black chronograph sub-dials for the classic “panda” contrast. The dial holds applied baton hour markers with a luminous coating, polished and faceted to read clearly against the white ground.
Three Sub-Dials and Chronograph Layout
The three black sub-dials handle the chronograph functions of the 116500LN Super Clone in the genuine layout. The sub-dial positions are listed below.
- Small seconds: Positioned at 6 o’clock, tracking the running seconds of the movement.
- 30-minute counter: Positioned at 3 o’clock, recording elapsed minutes during chronograph timing.
- 12-hour counter: Positioned at 9 o’clock, recording elapsed hours during chronograph timing.
Hands, Text and Symmetry
The applied Rolex coronet sits at 12 o’clock with “Rolex Oyster Perpetual Cosmograph Daytona” printed in crisp red and black text. The central chronograph seconds hand sweeps across the white dial, and the hour and minute hands carry the same luminous fill as the markers. The white dial and black sub-dials give the 116500LN a sharp, balanced “panda” face that reads quickly at a glance.
Movement & Specifications
Swiss-Grade Caliber 4130 Chronograph Clone Movement
The Rolex Daytona 116500LN super clone runs on a Swiss-grade automatic chronograph movement engineered to reproduce the genuine Rolex Caliber 4130 in feel, frequency, and autonomy. The movement operates at 28,800 vibrations per hour, winds bidirectionally through a free-rotating rotor, and holds a 72-hour power reserve for a full weekend off the wrist.
Chronograph Action and Accuracy
Daily deviation holds within -5 to +8 seconds per day after factory regulation, close to the chronometer standard of the genuine Caliber 4130. The chronograph starts, stops, and resets cleanly through the screw-down pushers, and the central seconds hand returns precisely to zero. The smooth sweeping seconds and the quiet rotor confirm the Swiss-grade chronograph build.
Spec grid:
Bracelet & Strap
Steel Oyster Bracelet and Oysterlock Clasp
The Daytona 116500LN super clone carries the steel Oyster bracelet, the flat three-piece-link design Rolex pairs with the steel Cosmograph Daytona. The bracelet uses solid 904L steel links with brushed centers and polished edges, and the folding Oysterlock safety clasp closes flush to prevent accidental opening.
Wrist Feel, Easylink and Comfort
The watch weighs approximately 145 grams on the full bracelet, giving the substantial wrist presence buyers expect from a steel sports Rolex. The Oysterlock clasp includes the Easylink 5mm comfort extension, letting the wearer adjust the fit without tools. The 40mm case and tapered Oyster bracelet sit comfortably on wrists from 6.5 to 8 inches.
Case, Pushers and Cerachrom Bezel 40mm Steel Build
The Rolex Daytona 116500LN super clone carries a 40mm Oyster case measuring 12.4mm thick, machined from 904L stainless steel for accurate weight and corrosion resistance. The case mixes brushed surfaces on the lugs with polished flanks, matching the genuine steel Daytona finishing. Screw-down chronograph pushers flank the screw-down Triplock crown at 3 o’clock and keep the case sealed during chronograph use.
Black Cerachrom Bezel and Tachymetric Scale
The black Cerachrom ceramic bezel rings the dial with an engraved tachymetric scale for measuring average speed over distance. Cerachrom is the corrosion-proof and fade-proof ceramic Rolex introduced on the steel Daytona in 2016, and this super clone reproduces the deep black ceramic with a recessed, light-filled numeral track. The fixed bezel resists scratches and holds its color through years of daily wear.
Sapphire Crystal and Caseback
Scratch-resistant sapphire crystal with anti-reflective coating covers the white dial and keeps the chronograph readout clear in direct light. The flat crystal sits without a date magnifier, true to the no-date Daytona layout. The solid screw-down caseback seals the Caliber 4130 clone movement and holds w
White Lacquer Dial with Black Chronograph Sub-Dials
The white lacquer dial of this Daytona 116500LN super clone carries a clean, bright white surface that frames the three black chronograph sub-dials for the classic “panda” contrast. The dial holds applied baton hour markers with a luminous coating, polished and faceted to read clearly against the white ground.
Three Sub-Dials and Chronograph Layout
The three black sub-dials handle the chronograph functions of the 116500LN Super Clone in the genuine layout. The sub-dial positions are listed below.
- Small seconds: Positioned at 6 o’clock, tracking the running seconds of the movement.
- 30-minute counter: Positioned at 3 o’clock, recording elapsed minutes during chronograph timing.
- 12-hour counter: Positioned at 9 o’clock, recording elapsed hours during chronograph timing.
Hands, Text and Symmetry
The applied Rolex coronet sits at 12 o’clock with “Rolex Oyster Perpetual Cosmograph Daytona” printed in crisp red and black text. The central chronograph seconds hand sweeps across the white dial, and the hour and minute hands carry the same luminous fill as the markers. The white dial and black sub-dials give the 116500LN a sharp, balanced “panda” face that reads quickly at a glance.
Swiss-Grade Caliber 4130 Chronograph Clone Movement
The Rolex Daytona 116500LN super clone runs on a Swiss-grade automatic chronograph movement engineered to reproduce the genuine Rolex Caliber 4130 in feel, frequency, and autonomy. The movement operates at 28,800 vibrations per hour, winds bidirectionally through a free-rotating rotor, and holds a 72-hour power reserve for a full weekend off the wrist.
Chronograph Action and Accuracy
Daily deviation holds within -5 to +8 seconds per day after factory regulation, close to the chronometer standard of the genuine Caliber 4130. The chronograph starts, stops, and resets cleanly through the screw-down pushers, and the central seconds hand returns precisely to zero. The smooth sweeping seconds and the quiet rotor confirm the Swiss-grade chronograph build.
Spec grid:
Steel Oyster Bracelet and Oysterlock Clasp
The Daytona 116500LN super clone carries the steel Oyster bracelet, the flat three-piece-link design Rolex pairs with the steel Cosmograph Daytona. The bracelet uses solid 904L steel links with brushed centers and polished edges, and the folding Oysterlock safety clasp closes flush to prevent accidental opening.
Wrist Feel, Easylink and Comfort
The watch weighs approximately 145 grams on the full bracelet, giving the substantial wrist presence buyers expect from a steel sports Rolex. The Oysterlock clasp includes the Easylink 5mm comfort extension, letting the wearer adjust the fit without tools. The 40mm case and tapered Oyster bracelet sit comfortably on wrists from 6.5 to 8 inches.
Case & Crystal
Case, Pushers and Cerachrom Bezel 40mm Steel Build
The Rolex Daytona 116500LN super clone carries a 40mm Oyster case measuring 12.4mm thick, machined from 904L stainless steel for accurate weight and corrosion resistance. The case mixes brushed surfaces on the lugs with polished flanks, matching the genuine steel Daytona finishing. Screw-down chronograph pushers flank the screw-down Triplock crown at 3 o’clock and keep the case sealed during chronograph use.
Black Cerachrom Bezel and Tachymetric Scale
The black Cerachrom ceramic bezel rings the dial with an engraved tachymetric scale for measuring average speed over distance. Cerachrom is the corrosion-proof and fade-proof ceramic Rolex introduced on the steel Daytona in 2016, and this super clone reproduces the deep black ceramic with a recessed, light-filled numeral track. The fixed bezel resists scratches and holds its color through years of daily wear.
Sapphire Crystal and Caseback
Scratch-resistant sapphire crystal with anti-reflective coating covers the white dial and keeps the chronograph readout clear in direct light. The flat crystal sits without a date magnifier, true to the no-date Daytona layout. The solid screw-down caseback seals the Caliber 4130 clone movement and holds w
Dial & Markers
White Lacquer Dial with Black Chronograph Sub-Dials
The white lacquer dial of this Daytona 116500LN super clone carries a clean, bright white surface that frames the three black chronograph sub-dials for the classic “panda” contrast. The dial holds applied baton hour markers with a luminous coating, polished and faceted to read clearly against the white ground.
Three Sub-Dials and Chronograph Layout
The three black sub-dials handle the chronograph functions of the 116500LN Super Clone in the genuine layout. The sub-dial positions are listed below.
- Small seconds: Positioned at 6 o’clock, tracking the running seconds of the movement.
- 30-minute counter: Positioned at 3 o’clock, recording elapsed minutes during chronograph timing.
- 12-hour counter: Positioned at 9 o’clock, recording elapsed hours during chronograph timing.
Hands, Text and Symmetry
The applied Rolex coronet sits at 12 o’clock with “Rolex Oyster Perpetual Cosmograph Daytona” printed in crisp red and black text. The central chronograph seconds hand sweeps across the white dial, and the hour and minute hands carry the same luminous fill as the markers. The white dial and black sub-dials give the 116500LN a sharp, balanced “panda” face that reads quickly at a glance.
Movement & Specifications
Swiss-Grade Caliber 4130 Chronograph Clone Movement
The Rolex Daytona 116500LN super clone runs on a Swiss-grade automatic chronograph movement engineered to reproduce the genuine Rolex Caliber 4130 in feel, frequency, and autonomy. The movement operates at 28,800 vibrations per hour, winds bidirectionally through a free-rotating rotor, and holds a 72-hour power reserve for a full weekend off the wrist.
Chronograph Action and Accuracy
Daily deviation holds within -5 to +8 seconds per day after factory regulation, close to the chronometer standard of the genuine Caliber 4130. The chronograph starts, stops, and resets cleanly through the screw-down pushers, and the central seconds hand returns precisely to zero. The smooth sweeping seconds and the quiet rotor confirm the Swiss-grade chronograph build.
Spec grid:
Bracelet & Strap
Steel Oyster Bracelet and Oysterlock Clasp
The Daytona 116500LN super clone carries the steel Oyster bracelet, the flat three-piece-link design Rolex pairs with the steel Cosmograph Daytona. The bracelet uses solid 904L steel links with brushed centers and polished edges, and the folding Oysterlock safety clasp closes flush to prevent accidental opening.
Wrist Feel, Easylink and Comfort
The watch weighs approximately 145 grams on the full bracelet, giving the substantial wrist presence buyers expect from a steel sports Rolex. The Oysterlock clasp includes the Easylink 5mm comfort extension, letting the wearer adjust the fit without tools. The 40mm case and tapered Oyster bracelet sit comfortably on wrists from 6.5 to 8 inches.
OUR QUALITY PROMISE
Quality Checks Before Shipping
Every timepiece deserves careful attention before it reaches you. Before dispatch, each watch undergoes a visual inspection to review its overall appearance, finishing, and key components.
Visual Inspection
Checking the overall appearance, dial and finishing.
Component Review
Reviewing hands, case, bracelet and clasp.
Final Review
A final check before careful packaging and dispatch.
THE ELITE EXPERIENCE
A Better Way to Shop for Timepieces
Enjoy a more reassuring shopping experience with thoughtful service, added protection and convenient delivery with every order.
1-Year Warranty
Added peace of mind with 1-year warranty coverage.
Free Shipping
Complimentary shipping on your order.
Careful Packaging
Carefully packed to help protect your order during transit.











