Rolex Daytona 116508 Super Clone: 40mm Yellow Gold Green Dial

The Rolex Daytona 116508 super clone features the 40mm yellow gold Cosmograph paired with a green dial and gold chronograph sub-dials, finished to 98% visual and dimensional parity with the genuine reference. This 116508 Super Clone carries the engraved yellow gold tachymeter bezel, three chronograph counters, and screw-down pushers on a yellow gold Oyster bracelet, priced at $1,499 against a genuine retail near $43,000.

This yellow gold Daytona 116508 Super Clone uses a polished yellow gold-tone case, an engraved gold tachymetric bezel, and a three-piece-link Oyster bracelet with an Oysterlock safety clasp. A Swiss-grade clone of Rolex Caliber 4130 drives the chronograph at 28,800 vibrations per hour with a 72-hour power reserve. The watch ships from a top-tier specialist factory with a full quality control pass, insured worldwide delivery, and a 1-year limited warranty.

Reference 116508
Case 40mm × 12.4mm, 18k yellow gold-tone
Dial Green with gold chronograph sub-dials
Movement Swiss-grade Caliber 4130 clone, automatic chronograph
Power Reserve 72 hours
Frequency 28,800 vph (4 Hz)
Water Res. 100 meters
Crystal Sapphire, anti-reflective coating
Bezel Engraved tachymeter, yellow gold-tone
Bracelet Oyster, three-piece links, Oysterlock clasp
Functions Hours, minutes, small seconds, chronograph, tachymeter

$ 1,499

4-Stage QC

Verified factory

Insured Shipping

DHL · FedEx · 5–10 days

1-Year Warranty

Parts + servicing

Discreet Packaging

Signature required

SSL Secure

Description

Rolex Daytona 116508 Super Clone: 40mm Yellow Gold Green Dial Overview

The Daytona 116508 is the 40mm yellow gold version of the Rolex Cosmograph Daytona, paired here with a green dial and gold chronograph sub-dials. This super clone reproduces the 116508 reference with an engraved gold tachymeter bezel, screw-down chronograph pushers, and a yellow gold Oyster bracelet for $1,499. Every counter position, bezel marking, and bracelet link follows the genuine reference within tight production tolerance.

Case & Crystal

Case, Pushers and Tachymeter Bezel 40mm Yellow Gold-Tone Build

The Rolex Daytona 116508 super clone carries a 40mm Oyster case measuring 12.4mm thick, built on a 904L stainless steel core with a high-grade yellow gold-tone finish for accurate color and long-term wear. Two screw-down chronograph pushers flank the screw-down Triplock crown at 3 o’clock, and each pusher locks down to support the 100-meter water resistance.

Engraved Tachymeter Bezel and Finishing

The tachymeter bezel rings the dial with an engraved speed scale graduated from 60 to 400 units per hour for measuring average speed over a fixed distance. This super clone cuts and fills each engraved numeral cleanly so the scale stays legible against the polished gold rim. Mirror-polished surfaces wrap the case sides, lugs, and bezel for the bright look yellow gold is known for.

Sapphire Crystal and Caseback

Scratch-resistant sapphire crystal with anti-reflective coating covers the green dial and keeps it readable in direct light for years of clear use. The Daytona uses a flat crystal without a Cyclops lens, since the reference carries no date window. The solid screw-down caseback seals the Caliber 4130 clone movement and holds water resistance to 100 meters, supported by the Triplock crown system.

Dial & Markers

Green Dial with Gold Chronograph Sub-Dials

The green dial of this Daytona 116508 super clone carries a rich, even green that sets a distinctive tone against the warm yellow gold case. The dial holds applied gold-tone hour markers and three recessed chronograph counters, each finished with a fine snailed texture that catches light at a different angle than the main dial.

Three Chronograph Counters and Hands

The dial carries three chronograph sub-dials in the standard Daytona layout. The three counters are listed below.

  • Small seconds: Runs continuously at 6 o’clock and shows the watch is running.
  • 30-minute counter: Sits at 3 o’clock and tracks elapsed chronograph minutes.
  • 12-hour counter: Sits at 9 o’clock and tracks elapsed chronograph hours.

Gold-tone baton hands sweep the main dial, and the central chronograph seconds hand starts, stops, and resets through the two screw-down pushers.

Logo, Text and Symmetry

The applied Rolex coronet sits at 12 o’clock above “Rolex Oyster Perpetual Superlative Chronometer Cosmograph Daytona” printed in crisp, fine text. The minute and seconds track frames the dial edge with even spacing. The green dial and gold counters give the 116508 a balanced, modern face that reads cleanly at a glance.

Movement & Specifications

Swiss-Grade Caliber 4130 Clone Movement

The Rolex Daytona 116508 super clone runs on a Swiss-grade automatic chronograph movement engineered to reproduce the genuine Rolex Caliber 4130 in feel, frequency, and autonomy. The movement operates at 28,800 vibrations per hour, winds bidirectionally through a free-rotating rotor, and holds a 72-hour power reserve for a full weekend off the wrist.

Chronograph Action and Accuracy

Daily deviation holds within -5 to +8 seconds per day after factory regulation, close to the chronometer standard of the genuine Caliber 4130. The vertical-clutch chronograph engages cleanly with no stutter when the top pusher starts the central seconds hand. The smooth sweeping seconds hand and the quiet winding rotor confirm the Swiss-grade build of the 116508 Super Clone.

Spec grid:

TypeAutomatic chronograph
Frequency28,800 vph (4 Hz)
Power Reserve72 hours
Jewels44
WindingAutomatic bidirectional
FunctionsHours, minutes, small seconds, chronograph
Bracelet & Strap

Yellow Gold Oyster Bracelet and Oysterlock Clasp

The Daytona 116508 super clone carries the Oyster bracelet, the three-piece flat-link design Rolex pairs with the gold Cosmograph. The bracelet uses a yellow gold-tone finish to match the case and the tachymeter bezel, with polished center links framed by brushed outer links that taper from the lugs toward the wrist.

Wrist Feel, Weight and Comfort

The watch weighs approximately 145 grams on the full bracelet, giving the substantial wrist presence buyers expect from a gold Daytona. The folding Oysterlock safety clasp closes flush and locks shut to prevent accidental opening. The 40mm case and tapered Oyster bracelet sit comfortably on wrists from 6.5 to 8 inches.

Case, Pushers and Tachymeter Bezel 40mm Yellow Gold-Tone Build

The Rolex Daytona 116508 super clone carries a 40mm Oyster case measuring 12.4mm thick, built on a 904L stainless steel core with a high-grade yellow gold-tone finish for accurate color and long-term wear. Two screw-down chronograph pushers flank the screw-down Triplock crown at 3 o’clock, and each pusher locks down to support the 100-meter water resistance.

Engraved Tachymeter Bezel and Finishing

The tachymeter bezel rings the dial with an engraved speed scale graduated from 60 to 400 units per hour for measuring average speed over a fixed distance. This super clone cuts and fills each engraved numeral cleanly so the scale stays legible against the polished gold rim. Mirror-polished surfaces wrap the case sides, lugs, and bezel for the bright look yellow gold is known for.

Sapphire Crystal and Caseback

Scratch-resistant sapphire crystal with anti-reflective coating covers the green dial and keeps it readable in direct light for years of clear use. The Daytona uses a flat crystal without a Cyclops lens, since the reference carries no date window. The solid screw-down caseback seals the Caliber 4130 clone movement and holds water resistance to 100 meters, supported by the Triplock crown system.

Green Dial with Gold Chronograph Sub-Dials

The green dial of this Daytona 116508 super clone carries a rich, even green that sets a distinctive tone against the warm yellow gold case. The dial holds applied gold-tone hour markers and three recessed chronograph counters, each finished with a fine snailed texture that catches light at a different angle than the main dial.

Three Chronograph Counters and Hands

The dial carries three chronograph sub-dials in the standard Daytona layout. The three counters are listed below.

  • Small seconds: Runs continuously at 6 o’clock and shows the watch is running.
  • 30-minute counter: Sits at 3 o’clock and tracks elapsed chronograph minutes.
  • 12-hour counter: Sits at 9 o’clock and tracks elapsed chronograph hours.

Gold-tone baton hands sweep the main dial, and the central chronograph seconds hand starts, stops, and resets through the two screw-down pushers.

Logo, Text and Symmetry

The applied Rolex coronet sits at 12 o’clock above “Rolex Oyster Perpetual Superlative Chronometer Cosmograph Daytona” printed in crisp, fine text. The minute and seconds track frames the dial edge with even spacing. The green dial and gold counters give the 116508 a balanced, modern face that reads cleanly at a glance.

Swiss-Grade Caliber 4130 Clone Movement

The Rolex Daytona 116508 super clone runs on a Swiss-grade automatic chronograph movement engineered to reproduce the genuine Rolex Caliber 4130 in feel, frequency, and autonomy. The movement operates at 28,800 vibrations per hour, winds bidirectionally through a free-rotating rotor, and holds a 72-hour power reserve for a full weekend off the wrist.

Chronograph Action and Accuracy

Daily deviation holds within -5 to +8 seconds per day after factory regulation, close to the chronometer standard of the genuine Caliber 4130. The vertical-clutch chronograph engages cleanly with no stutter when the top pusher starts the central seconds hand. The smooth sweeping seconds hand and the quiet winding rotor confirm the Swiss-grade build of the 116508 Super Clone.

Spec grid:

TypeAutomatic chronograph
Frequency28,800 vph (4 Hz)
Power Reserve72 hours
Jewels44
WindingAutomatic bidirectional
FunctionsHours, minutes, small seconds, chronograph

Yellow Gold Oyster Bracelet and Oysterlock Clasp

The Daytona 116508 super clone carries the Oyster bracelet, the three-piece flat-link design Rolex pairs with the gold Cosmograph. The bracelet uses a yellow gold-tone finish to match the case and the tachymeter bezel, with polished center links framed by brushed outer links that taper from the lugs toward the wrist.

Wrist Feel, Weight and Comfort

The watch weighs approximately 145 grams on the full bracelet, giving the substantial wrist presence buyers expect from a gold Daytona. The folding Oysterlock safety clasp closes flush and locks shut to prevent accidental opening. The 40mm case and tapered Oyster bracelet sit comfortably on wrists from 6.5 to 8 inches.

Case & Crystal

Case, Pushers and Tachymeter Bezel 40mm Yellow Gold-Tone Build

The Rolex Daytona 116508 super clone carries a 40mm Oyster case measuring 12.4mm thick, built on a 904L stainless steel core with a high-grade yellow gold-tone finish for accurate color and long-term wear. Two screw-down chronograph pushers flank the screw-down Triplock crown at 3 o’clock, and each pusher locks down to support the 100-meter water resistance.

Engraved Tachymeter Bezel and Finishing

The tachymeter bezel rings the dial with an engraved speed scale graduated from 60 to 400 units per hour for measuring average speed over a fixed distance. This super clone cuts and fills each engraved numeral cleanly so the scale stays legible against the polished gold rim. Mirror-polished surfaces wrap the case sides, lugs, and bezel for the bright look yellow gold is known for.

Sapphire Crystal and Caseback

Scratch-resistant sapphire crystal with anti-reflective coating covers the green dial and keeps it readable in direct light for years of clear use. The Daytona uses a flat crystal without a Cyclops lens, since the reference carries no date window. The solid screw-down caseback seals the Caliber 4130 clone movement and holds water resistance to 100 meters, supported by the Triplock crown system.

Dial & Markers

Green Dial with Gold Chronograph Sub-Dials

The green dial of this Daytona 116508 super clone carries a rich, even green that sets a distinctive tone against the warm yellow gold case. The dial holds applied gold-tone hour markers and three recessed chronograph counters, each finished with a fine snailed texture that catches light at a different angle than the main dial.

Three Chronograph Counters and Hands

The dial carries three chronograph sub-dials in the standard Daytona layout. The three counters are listed below.

  • Small seconds: Runs continuously at 6 o’clock and shows the watch is running.
  • 30-minute counter: Sits at 3 o’clock and tracks elapsed chronograph minutes.
  • 12-hour counter: Sits at 9 o’clock and tracks elapsed chronograph hours.

Gold-tone baton hands sweep the main dial, and the central chronograph seconds hand starts, stops, and resets through the two screw-down pushers.

Logo, Text and Symmetry

The applied Rolex coronet sits at 12 o’clock above “Rolex Oyster Perpetual Superlative Chronometer Cosmograph Daytona” printed in crisp, fine text. The minute and seconds track frames the dial edge with even spacing. The green dial and gold counters give the 116508 a balanced, modern face that reads cleanly at a glance.

Movement & Specifications

Swiss-Grade Caliber 4130 Clone Movement

The Rolex Daytona 116508 super clone runs on a Swiss-grade automatic chronograph movement engineered to reproduce the genuine Rolex Caliber 4130 in feel, frequency, and autonomy. The movement operates at 28,800 vibrations per hour, winds bidirectionally through a free-rotating rotor, and holds a 72-hour power reserve for a full weekend off the wrist.

Chronograph Action and Accuracy

Daily deviation holds within -5 to +8 seconds per day after factory regulation, close to the chronometer standard of the genuine Caliber 4130. The vertical-clutch chronograph engages cleanly with no stutter when the top pusher starts the central seconds hand. The smooth sweeping seconds hand and the quiet winding rotor confirm the Swiss-grade build of the 116508 Super Clone.

Spec grid:

TypeAutomatic chronograph
Frequency28,800 vph (4 Hz)
Power Reserve72 hours
Jewels44
WindingAutomatic bidirectional
FunctionsHours, minutes, small seconds, chronograph
Bracelet & Strap

Yellow Gold Oyster Bracelet and Oysterlock Clasp

The Daytona 116508 super clone carries the Oyster bracelet, the three-piece flat-link design Rolex pairs with the gold Cosmograph. The bracelet uses a yellow gold-tone finish to match the case and the tachymeter bezel, with polished center links framed by brushed outer links that taper from the lugs toward the wrist.

Wrist Feel, Weight and Comfort

The watch weighs approximately 145 grams on the full bracelet, giving the substantial wrist presence buyers expect from a gold Daytona. The folding Oysterlock safety clasp closes flush and locks shut to prevent accidental opening. The 40mm case and tapered Oyster bracelet sit comfortably on wrists from 6.5 to 8 inches.

OUR QUALITY PROMISE

Quality Checks Before Shipping

Every timepiece deserves careful attention before it reaches you. Before dispatch, each watch undergoes a visual inspection to review its overall appearance, finishing, and key components.

Visual Inspection

Checking the overall appearance, dial and finishing.

Component Review

Reviewing hands, case, bracelet and clasp.

Final Review

A final check before careful packaging and dispatch.

shopping with confidence

THE ELITE EXPERIENCE

A Better Way to Shop for Timepieces

Enjoy a more reassuring shopping experience with thoughtful service, added protection and convenient delivery with every order.

1-Year Warranty

Added peace of mind with 1-year warranty coverage.

Free Shipping

Complimentary shipping on your order.

Careful Packaging

Carefully packed to help protect your order during transit.