Rolex Daytona 116509 Super Clone: 40mm White Gold Silver Dial
The Rolex Daytona 116509 super clone features the 40mm white gold Cosmograph Daytona paired with a silver dial and contrasting chronograph sub-dials, finished to 98% visual and dimensional parity with the genuine reference. This 116509 Super Clone carries the white gold tachymeter bezel, three chronograph counters, and screw-down pushers above the white gold-tone Oyster case, priced at $1,549 against a genuine retail near $43,000.
This white gold Daytona Super Clone uses a polished white gold-tone case, a precisely engraved tachymetric bezel, and a flat three-piece-link Oyster bracelet with an Oysterlock safety clasp. A Swiss-grade clone of Rolex Caliber 4130 drives the chronograph at 28,800 vibrations per hour with a 72-hour power reserve. The watch ships from a top-tier specialist factory with a full quality control pass, insured worldwide delivery, and a 1-year limited warranty.
| Reference | 116509 |
|---|---|
| Case | 40mm × 12.4mm, 18k white gold-tone |
| Dial | Silver with contrasting black sub-dials |
| Movement | Swiss-grade Caliber 4130 clone, automatic chronograph |
| Power Reserve | 72 hours |
| Frequency | 28,800 vph (4 Hz) |
| Water Res. | 100 meters |
| Crystal | Sapphire, anti-reflective |
| Bezel | Engraved tachymeter, white gold-tone |
| Bracelet | Oyster, three-piece links, Oysterlock clasp |
| Functions | Hours, minutes, small seconds, chronograph with 30-minute and 12-hour counters |
$ 1,549
4-Stage QC
Verified factory
Insured Shipping
DHL · FedEx · 5–10 days
1-Year Warranty
Parts + servicing
Discreet Packaging
Signature required
SSL Secure
Description
Rolex Daytona 116509 Super Clone: 40mm White Gold Silver Dial Overview
The Daytona 116509 is the 40mm white gold version of the Rolex Cosmograph Daytona, paired here with a silver dial and contrasting black chronograph sub-dials. This super clone reproduces the 116509 reference with an engraved white gold tachymeter bezel, three counters, and screw-down chronograph pushers for $1,549. Every proportion, bezel marking, and bracelet link follows the genuine reference within tight production tolerance.
Case & Crystal
Case, Crown and Tachymeter Bezel 40mm White Gold-Tone Build
The Rolex Daytona 116509 super clone carries a 40mm Oyster case measuring 12.4mm thick, built on a 904L stainless steel core with a high-grade white gold-tone finish for accurate color and long-term wear. The Cosmograph Daytona uses screw-down chronograph pushers on each side of the crown, and this clone reproduces the screw-thread action that seals the pushers for 100-meter water resistance.
Tachymeter Bezel Geometry and Finishing
The tachymeter bezel rings the dial with an engraved scale that converts elapsed seconds into average speed over a measured distance. This super clone engraves the scale into the white gold-tone bezel and fills the markings for a clean read against the polished metal. Mirror-polished surfaces wrap the case and the bezel for the bright look white gold is known for. The Triplock screw-down crown sits at 3 o’clock between the two chronograph pushers, engraved with the Rolex coronet.
Sapphire Crystal and Caseback
Scratch-resistant sapphire crystal covers the silver dial and resists daily knocks for years of clear reading. An anti-reflective coating cuts glare so the silver dial and the black sub-dials stay legible at an angle. The solid screw-down caseback seals the chronograph movement and holds water resistance to 100 meters, supported by the Triplock crown system.
Dial & Markers
Silver Dial with Contrasting Black Sub-Dials
The silver dial of this Daytona 116509 super clone carries a bright, even silver that frames the white gold case with a cool monochrome tone. The dial holds three black chronograph sub-dials set against the silver surface, a layout collectors call the panda configuration for its strong light-to-dark contrast.
Chronograph Counters, Markers and Hands
The dial carries three chronograph sub-dials in fixed positions. The sub-dial layout is listed below.
- Small seconds: Positioned at 6 o’clock, running continuously while the chronograph rests.
- 30-minute counter: Positioned at 3 o’clock, tracking elapsed minutes during timing.
- 12-hour counter: Positioned at 9 o’clock, tracking elapsed hours during timing.
Applied white gold-tone baton markers sit at every hour with a luminous fill for low-light reading. The central chronograph seconds hand sweeps the full dial for timing, while the small seconds at 6 o’clock runs at 28,800 vibrations per hour for the genuine Daytona motion.
Logo, Text and Symmetry
The applied Rolex coronet sits at 12 o’clock, with “Rolex Oyster Perpetual Cosmograph” and “Daytona” printed in crisp, fine text. The minute and seconds track frames the dial edge with even spacing. The silver dial and black sub-dials give the 116509 a sharp, balanced symmetry against the bright white gold case.
Movement & Specifications
Swiss-Grade Caliber 4130 Clone Movement
The Rolex Daytona 116509 super clone runs on a Swiss-grade automatic chronograph movement engineered to reproduce the genuine Rolex Caliber 4130 in feel, frequency, and autonomy. The movement operates at 28,800 vibrations per hour, winds bidirectionally through a free-rotating rotor, and holds a 72-hour power reserve for a full weekend off the wrist.
Chronograph Function and Accuracy
The chronograph starts, stops, and resets through the two screw-down pushers, with a vertical-clutch design that engages the central seconds hand without the stutter of older lever systems. Daily deviation holds within -5 to +8 seconds per day after factory regulation, close to the chronometer standard of the genuine Caliber 4130. The smooth sweeping small seconds hand and the quiet rotor confirm the Swiss-grade build of this 116509 Super Clone.
Spec grid:
Bracelet & Strap
White Gold Oyster Bracelet and Oysterlock Clasp
The Daytona 116509 super clone carries the Oyster bracelet, the flat three-piece link design Rolex pairs with the Cosmograph Daytona. The bracelet uses a white gold-tone finish to match the case and the tachymeter bezel, with brushed centre links and polished outer links that taper smoothly from the lugs toward the wrist.
Wrist Feel, Weight and Comfort
The watch weighs approximately 150 grams on the full bracelet, giving the substantial wrist presence buyers expect from a white gold Daytona. The folding Oysterlock safety clasp closes flush and resists accidental opening, and the Easylink extension allows a 5mm comfort adjustment. The 40mm case and tapered bracelet sit comfortably on wrists from 6.5 to 8 inches.
Case, Crown and Tachymeter Bezel 40mm White Gold-Tone Build
The Rolex Daytona 116509 super clone carries a 40mm Oyster case measuring 12.4mm thick, built on a 904L stainless steel core with a high-grade white gold-tone finish for accurate color and long-term wear. The Cosmograph Daytona uses screw-down chronograph pushers on each side of the crown, and this clone reproduces the screw-thread action that seals the pushers for 100-meter water resistance.
Tachymeter Bezel Geometry and Finishing
The tachymeter bezel rings the dial with an engraved scale that converts elapsed seconds into average speed over a measured distance. This super clone engraves the scale into the white gold-tone bezel and fills the markings for a clean read against the polished metal. Mirror-polished surfaces wrap the case and the bezel for the bright look white gold is known for. The Triplock screw-down crown sits at 3 o’clock between the two chronograph pushers, engraved with the Rolex coronet.
Sapphire Crystal and Caseback
Scratch-resistant sapphire crystal covers the silver dial and resists daily knocks for years of clear reading. An anti-reflective coating cuts glare so the silver dial and the black sub-dials stay legible at an angle. The solid screw-down caseback seals the chronograph movement and holds water resistance to 100 meters, supported by the Triplock crown system.
Silver Dial with Contrasting Black Sub-Dials
The silver dial of this Daytona 116509 super clone carries a bright, even silver that frames the white gold case with a cool monochrome tone. The dial holds three black chronograph sub-dials set against the silver surface, a layout collectors call the panda configuration for its strong light-to-dark contrast.
Chronograph Counters, Markers and Hands
The dial carries three chronograph sub-dials in fixed positions. The sub-dial layout is listed below.
- Small seconds: Positioned at 6 o’clock, running continuously while the chronograph rests.
- 30-minute counter: Positioned at 3 o’clock, tracking elapsed minutes during timing.
- 12-hour counter: Positioned at 9 o’clock, tracking elapsed hours during timing.
Applied white gold-tone baton markers sit at every hour with a luminous fill for low-light reading. The central chronograph seconds hand sweeps the full dial for timing, while the small seconds at 6 o’clock runs at 28,800 vibrations per hour for the genuine Daytona motion.
Logo, Text and Symmetry
The applied Rolex coronet sits at 12 o’clock, with “Rolex Oyster Perpetual Cosmograph” and “Daytona” printed in crisp, fine text. The minute and seconds track frames the dial edge with even spacing. The silver dial and black sub-dials give the 116509 a sharp, balanced symmetry against the bright white gold case.
Swiss-Grade Caliber 4130 Clone Movement
The Rolex Daytona 116509 super clone runs on a Swiss-grade automatic chronograph movement engineered to reproduce the genuine Rolex Caliber 4130 in feel, frequency, and autonomy. The movement operates at 28,800 vibrations per hour, winds bidirectionally through a free-rotating rotor, and holds a 72-hour power reserve for a full weekend off the wrist.
Chronograph Function and Accuracy
The chronograph starts, stops, and resets through the two screw-down pushers, with a vertical-clutch design that engages the central seconds hand without the stutter of older lever systems. Daily deviation holds within -5 to +8 seconds per day after factory regulation, close to the chronometer standard of the genuine Caliber 4130. The smooth sweeping small seconds hand and the quiet rotor confirm the Swiss-grade build of this 116509 Super Clone.
Spec grid:
White Gold Oyster Bracelet and Oysterlock Clasp
The Daytona 116509 super clone carries the Oyster bracelet, the flat three-piece link design Rolex pairs with the Cosmograph Daytona. The bracelet uses a white gold-tone finish to match the case and the tachymeter bezel, with brushed centre links and polished outer links that taper smoothly from the lugs toward the wrist.
Wrist Feel, Weight and Comfort
The watch weighs approximately 150 grams on the full bracelet, giving the substantial wrist presence buyers expect from a white gold Daytona. The folding Oysterlock safety clasp closes flush and resists accidental opening, and the Easylink extension allows a 5mm comfort adjustment. The 40mm case and tapered bracelet sit comfortably on wrists from 6.5 to 8 inches.
Case & Crystal
Case, Crown and Tachymeter Bezel 40mm White Gold-Tone Build
The Rolex Daytona 116509 super clone carries a 40mm Oyster case measuring 12.4mm thick, built on a 904L stainless steel core with a high-grade white gold-tone finish for accurate color and long-term wear. The Cosmograph Daytona uses screw-down chronograph pushers on each side of the crown, and this clone reproduces the screw-thread action that seals the pushers for 100-meter water resistance.
Tachymeter Bezel Geometry and Finishing
The tachymeter bezel rings the dial with an engraved scale that converts elapsed seconds into average speed over a measured distance. This super clone engraves the scale into the white gold-tone bezel and fills the markings for a clean read against the polished metal. Mirror-polished surfaces wrap the case and the bezel for the bright look white gold is known for. The Triplock screw-down crown sits at 3 o’clock between the two chronograph pushers, engraved with the Rolex coronet.
Sapphire Crystal and Caseback
Scratch-resistant sapphire crystal covers the silver dial and resists daily knocks for years of clear reading. An anti-reflective coating cuts glare so the silver dial and the black sub-dials stay legible at an angle. The solid screw-down caseback seals the chronograph movement and holds water resistance to 100 meters, supported by the Triplock crown system.
Dial & Markers
Silver Dial with Contrasting Black Sub-Dials
The silver dial of this Daytona 116509 super clone carries a bright, even silver that frames the white gold case with a cool monochrome tone. The dial holds three black chronograph sub-dials set against the silver surface, a layout collectors call the panda configuration for its strong light-to-dark contrast.
Chronograph Counters, Markers and Hands
The dial carries three chronograph sub-dials in fixed positions. The sub-dial layout is listed below.
- Small seconds: Positioned at 6 o’clock, running continuously while the chronograph rests.
- 30-minute counter: Positioned at 3 o’clock, tracking elapsed minutes during timing.
- 12-hour counter: Positioned at 9 o’clock, tracking elapsed hours during timing.
Applied white gold-tone baton markers sit at every hour with a luminous fill for low-light reading. The central chronograph seconds hand sweeps the full dial for timing, while the small seconds at 6 o’clock runs at 28,800 vibrations per hour for the genuine Daytona motion.
Logo, Text and Symmetry
The applied Rolex coronet sits at 12 o’clock, with “Rolex Oyster Perpetual Cosmograph” and “Daytona” printed in crisp, fine text. The minute and seconds track frames the dial edge with even spacing. The silver dial and black sub-dials give the 116509 a sharp, balanced symmetry against the bright white gold case.
Movement & Specifications
Swiss-Grade Caliber 4130 Clone Movement
The Rolex Daytona 116509 super clone runs on a Swiss-grade automatic chronograph movement engineered to reproduce the genuine Rolex Caliber 4130 in feel, frequency, and autonomy. The movement operates at 28,800 vibrations per hour, winds bidirectionally through a free-rotating rotor, and holds a 72-hour power reserve for a full weekend off the wrist.
Chronograph Function and Accuracy
The chronograph starts, stops, and resets through the two screw-down pushers, with a vertical-clutch design that engages the central seconds hand without the stutter of older lever systems. Daily deviation holds within -5 to +8 seconds per day after factory regulation, close to the chronometer standard of the genuine Caliber 4130. The smooth sweeping small seconds hand and the quiet rotor confirm the Swiss-grade build of this 116509 Super Clone.
Spec grid:
Bracelet & Strap
White Gold Oyster Bracelet and Oysterlock Clasp
The Daytona 116509 super clone carries the Oyster bracelet, the flat three-piece link design Rolex pairs with the Cosmograph Daytona. The bracelet uses a white gold-tone finish to match the case and the tachymeter bezel, with brushed centre links and polished outer links that taper smoothly from the lugs toward the wrist.
Wrist Feel, Weight and Comfort
The watch weighs approximately 150 grams on the full bracelet, giving the substantial wrist presence buyers expect from a white gold Daytona. The folding Oysterlock safety clasp closes flush and resists accidental opening, and the Easylink extension allows a 5mm comfort adjustment. The 40mm case and tapered bracelet sit comfortably on wrists from 6.5 to 8 inches.
OUR QUALITY PROMISE
Quality Checks Before Shipping
Every timepiece deserves careful attention before it reaches you. Before dispatch, each watch undergoes a visual inspection to review its overall appearance, finishing, and key components.
Visual Inspection
Checking the overall appearance, dial and finishing.
Component Review
Reviewing hands, case, bracelet and clasp.
Final Review
A final check before careful packaging and dispatch.
THE ELITE EXPERIENCE
A Better Way to Shop for Timepieces
Enjoy a more reassuring shopping experience with thoughtful service, added protection and convenient delivery with every order.
1-Year Warranty
Added peace of mind with 1-year warranty coverage.
Free Shipping
Complimentary shipping on your order.
Careful Packaging
Carefully packed to help protect your order during transit.











