Rolex Daytona 116520 Super Clone: 40mm Steel Black Dial

The Rolex Daytona 116520 super clone features the 40mm stainless steel Cosmograph Daytona paired with a black dial and contrasting silver-white chronograph sub-dials, finished to 98% visual and dimensional parity with the genuine reference. This 116520 Super Clone carries the engraved steel tachymeter bezel, screw-down chronograph pushers, and the steel Oyster bracelet, priced at $1,399 against a genuine secondary-market figure near $30,000.

This steel Daytona 116520 Super Clone uses a brushed and polished 904L steel case, an engraved steel tachymetric bezel, and the three-link Oyster bracelet with an Oysterlock safety clasp. A Swiss-grade clone of Rolex Caliber 4130 drives the chronograph at 28,800 vibrations per hour with a 72-hour power reserve. The watch ships from a top-tier specialist factory with a full quality control pass, insured worldwide delivery, and a 1-year limited warranty.

Reference 116520
Case 40mm × 12.5mm, 904L stainless steel
Dial Black with silver-white chronograph sub-dials
Movement Swiss-grade Caliber 4130 clone, automatic chronograph
Power Reserve 72 hours
Frequency 28,800 vph (4 Hz)
Water Res. 100 meters
Crystal Sapphire, no Cyclops
Bezel Engraved steel tachymeter scale
Bracelet Steel Oyster, three-piece links, Oysterlock clasp
Functions Hours, minutes, seconds, chronograph, tachymeter

$ 1,399

4-Stage QC

Verified factory

Insured Shipping

DHL · FedEx · 5–10 days

1-Year Warranty

Parts + servicing

Discreet Packaging

Signature required

SSL Secure

Description

Rolex Daytona 116520 Super Clone: 40mm Steel Black Dial Overview

The Daytona 116520 is the stainless steel version of the Rolex Cosmograph Daytona, paired here with a black dial and silver-white sub-dials. This super clone follows the 116520 reference with an engraved steel tachymeter bezel, screw-down chronograph pushers, and the Oyster bracelet for $1,399. Every proportion, bezel engraving, and sub-dial position follows the genuine reference within tight production tolerance.

Case & Crystal

 Case, Pushers and Engraved Steel Tachymeter Bezel 40mm Build

The Rolex Daytona 116520 super clone carries a 40mm Oyster case measuring 12.5mm thick, built from 904L stainless steel for the bright finish and corrosion resistance of the genuine reference. The case mixes brushed surfaces on the top with polished edges along the sides, matching the contrast finishing Rolex applies to the steel Daytona.

Engraved Steel Tachymeter Bezel and Crown Geometry

The engraved steel tachymeter bezel rings the dial with a tachymetric scale used to read average speed over a measured distance. This super clone engraves the scale into the steel itself rather than printing it, so the markings stay crisp through years of wear. The Triplock screw-down crown sits at 3 o’clock between two screw-down chronograph pushers, and all three thread closed to seal the case.

Sapphire Crystal and Caseback

Scratch-resistant sapphire crystal covers the black dial and resists daily knocks for years of clear reading. The Daytona crystal carries no Cyclops lens, since the 116520 has no date function. The solid screw-down caseback seals the chronograph movement and holds water resistance to 100 meters, supported by the Triplock crown and the screw-down pushers.

Dial & Markers

Black Dial with Silver-White Chronograph Sub-Dials

The black dial of this Daytona 116520 super clone carries a deep, even black that frames the three silver-white chronograph sub-dials with strong contrast. The dial holds applied steel-tone baton markers at every hour, each filled with luminous material and edged in polished metal to catch light against the dark surface.

Three Chronograph Sub-Dials and Hands

The dial carries three chronograph registers laid out in the genuine Daytona pattern. The sub-dial functions are listed below.

  1. Small running seconds: Positioned at 6 o’clock and active whenever the watch runs.
  2. 30-minute counter: Positioned at 3 o’clock and driven by the chronograph.
  3. 12-hour counter: Positioned at 9 o’clock and driven by the chronograph.

The central chronograph seconds hand sweeps across the full dial when the chronograph runs, while steel-tone baton hands track the hours and minutes.

Logo, Text and Symmetry

The applied Rolex coronet sits at 12 o’clock, with “Rolex Oyster Perpetual Superlative Chronometer Cosmograph” printed in crisp, fine text. The “Daytona” name prints in red just above the 6 o’clock sub-dial. The minute and tachymeter tracks frame the dial with even spacing, giving the 116520 the balanced layout collectors expect from the steel Daytona.

Movement & Specifications

Swiss-Grade Caliber 4130 Clone Movement

The Rolex Daytona 116520 super clone runs on a Swiss-grade automatic chronograph movement engineered to reproduce the genuine Rolex Caliber 4130 in feel, frequency, and autonomy. The movement operates at 28,800 vibrations per hour, winds bidirectionally through a free-rotating rotor, and holds a 72-hour power reserve for three days off the wrist.

Chronograph Action, Accuracy and Performance

Daily deviation holds within -5 to +8 seconds per day after factory regulation, close to the chronometer standard of the genuine Caliber 4130. The chronograph pushers engage with a clean, defined click, and the central seconds hand starts, stops, and resets cleanly. The smooth sweeping seconds hand and the quiet winding rotor confirm the Swiss-grade build.

Spec grid:

Type:Automatic chronograph
Frequency:28,800 vph (4 Hz)
Power Reserve:72 hours
Jewels:44
Winding:Automatic bidirectional
Functions:Hours, minutes, seconds, chronograph
Bracelet & Strap

Steel Oyster Bracelet and Oysterlock Clasp

The Daytona 116520 super clone carries the steel Oyster bracelet, the three-piece-link design Rolex uses across its professional sport models. The bracelet uses brushed outer links with polished center links, and the Oysterlock folding clasp closes flush with a safety catch that guards against accidental opening.

Wrist Feel, Weight and Comfort

The watch weighs approximately 145 grams on the full steel bracelet, giving the solid wrist presence buyers expect from a steel Daytona. The 40mm case and the tapered Oyster bracelet sit comfortably on wrists from 6.5 to 8 inches. The clasp includes a fine-adjustment system for small length changes through the day.

 Case, Pushers and Engraved Steel Tachymeter Bezel 40mm Build

The Rolex Daytona 116520 super clone carries a 40mm Oyster case measuring 12.5mm thick, built from 904L stainless steel for the bright finish and corrosion resistance of the genuine reference. The case mixes brushed surfaces on the top with polished edges along the sides, matching the contrast finishing Rolex applies to the steel Daytona.

Engraved Steel Tachymeter Bezel and Crown Geometry

The engraved steel tachymeter bezel rings the dial with a tachymetric scale used to read average speed over a measured distance. This super clone engraves the scale into the steel itself rather than printing it, so the markings stay crisp through years of wear. The Triplock screw-down crown sits at 3 o’clock between two screw-down chronograph pushers, and all three thread closed to seal the case.

Sapphire Crystal and Caseback

Scratch-resistant sapphire crystal covers the black dial and resists daily knocks for years of clear reading. The Daytona crystal carries no Cyclops lens, since the 116520 has no date function. The solid screw-down caseback seals the chronograph movement and holds water resistance to 100 meters, supported by the Triplock crown and the screw-down pushers.

Black Dial with Silver-White Chronograph Sub-Dials

The black dial of this Daytona 116520 super clone carries a deep, even black that frames the three silver-white chronograph sub-dials with strong contrast. The dial holds applied steel-tone baton markers at every hour, each filled with luminous material and edged in polished metal to catch light against the dark surface.

Three Chronograph Sub-Dials and Hands

The dial carries three chronograph registers laid out in the genuine Daytona pattern. The sub-dial functions are listed below.

  1. Small running seconds: Positioned at 6 o’clock and active whenever the watch runs.
  2. 30-minute counter: Positioned at 3 o’clock and driven by the chronograph.
  3. 12-hour counter: Positioned at 9 o’clock and driven by the chronograph.

The central chronograph seconds hand sweeps across the full dial when the chronograph runs, while steel-tone baton hands track the hours and minutes.

Logo, Text and Symmetry

The applied Rolex coronet sits at 12 o’clock, with “Rolex Oyster Perpetual Superlative Chronometer Cosmograph” printed in crisp, fine text. The “Daytona” name prints in red just above the 6 o’clock sub-dial. The minute and tachymeter tracks frame the dial with even spacing, giving the 116520 the balanced layout collectors expect from the steel Daytona.

Swiss-Grade Caliber 4130 Clone Movement

The Rolex Daytona 116520 super clone runs on a Swiss-grade automatic chronograph movement engineered to reproduce the genuine Rolex Caliber 4130 in feel, frequency, and autonomy. The movement operates at 28,800 vibrations per hour, winds bidirectionally through a free-rotating rotor, and holds a 72-hour power reserve for three days off the wrist.

Chronograph Action, Accuracy and Performance

Daily deviation holds within -5 to +8 seconds per day after factory regulation, close to the chronometer standard of the genuine Caliber 4130. The chronograph pushers engage with a clean, defined click, and the central seconds hand starts, stops, and resets cleanly. The smooth sweeping seconds hand and the quiet winding rotor confirm the Swiss-grade build.

Spec grid:

Type:Automatic chronograph
Frequency:28,800 vph (4 Hz)
Power Reserve:72 hours
Jewels:44
Winding:Automatic bidirectional
Functions:Hours, minutes, seconds, chronograph

Steel Oyster Bracelet and Oysterlock Clasp

The Daytona 116520 super clone carries the steel Oyster bracelet, the three-piece-link design Rolex uses across its professional sport models. The bracelet uses brushed outer links with polished center links, and the Oysterlock folding clasp closes flush with a safety catch that guards against accidental opening.

Wrist Feel, Weight and Comfort

The watch weighs approximately 145 grams on the full steel bracelet, giving the solid wrist presence buyers expect from a steel Daytona. The 40mm case and the tapered Oyster bracelet sit comfortably on wrists from 6.5 to 8 inches. The clasp includes a fine-adjustment system for small length changes through the day.

Case & Crystal

 Case, Pushers and Engraved Steel Tachymeter Bezel 40mm Build

The Rolex Daytona 116520 super clone carries a 40mm Oyster case measuring 12.5mm thick, built from 904L stainless steel for the bright finish and corrosion resistance of the genuine reference. The case mixes brushed surfaces on the top with polished edges along the sides, matching the contrast finishing Rolex applies to the steel Daytona.

Engraved Steel Tachymeter Bezel and Crown Geometry

The engraved steel tachymeter bezel rings the dial with a tachymetric scale used to read average speed over a measured distance. This super clone engraves the scale into the steel itself rather than printing it, so the markings stay crisp through years of wear. The Triplock screw-down crown sits at 3 o’clock between two screw-down chronograph pushers, and all three thread closed to seal the case.

Sapphire Crystal and Caseback

Scratch-resistant sapphire crystal covers the black dial and resists daily knocks for years of clear reading. The Daytona crystal carries no Cyclops lens, since the 116520 has no date function. The solid screw-down caseback seals the chronograph movement and holds water resistance to 100 meters, supported by the Triplock crown and the screw-down pushers.

Dial & Markers

Black Dial with Silver-White Chronograph Sub-Dials

The black dial of this Daytona 116520 super clone carries a deep, even black that frames the three silver-white chronograph sub-dials with strong contrast. The dial holds applied steel-tone baton markers at every hour, each filled with luminous material and edged in polished metal to catch light against the dark surface.

Three Chronograph Sub-Dials and Hands

The dial carries three chronograph registers laid out in the genuine Daytona pattern. The sub-dial functions are listed below.

  1. Small running seconds: Positioned at 6 o’clock and active whenever the watch runs.
  2. 30-minute counter: Positioned at 3 o’clock and driven by the chronograph.
  3. 12-hour counter: Positioned at 9 o’clock and driven by the chronograph.

The central chronograph seconds hand sweeps across the full dial when the chronograph runs, while steel-tone baton hands track the hours and minutes.

Logo, Text and Symmetry

The applied Rolex coronet sits at 12 o’clock, with “Rolex Oyster Perpetual Superlative Chronometer Cosmograph” printed in crisp, fine text. The “Daytona” name prints in red just above the 6 o’clock sub-dial. The minute and tachymeter tracks frame the dial with even spacing, giving the 116520 the balanced layout collectors expect from the steel Daytona.

Movement & Specifications

Swiss-Grade Caliber 4130 Clone Movement

The Rolex Daytona 116520 super clone runs on a Swiss-grade automatic chronograph movement engineered to reproduce the genuine Rolex Caliber 4130 in feel, frequency, and autonomy. The movement operates at 28,800 vibrations per hour, winds bidirectionally through a free-rotating rotor, and holds a 72-hour power reserve for three days off the wrist.

Chronograph Action, Accuracy and Performance

Daily deviation holds within -5 to +8 seconds per day after factory regulation, close to the chronometer standard of the genuine Caliber 4130. The chronograph pushers engage with a clean, defined click, and the central seconds hand starts, stops, and resets cleanly. The smooth sweeping seconds hand and the quiet winding rotor confirm the Swiss-grade build.

Spec grid:

Type:Automatic chronograph
Frequency:28,800 vph (4 Hz)
Power Reserve:72 hours
Jewels:44
Winding:Automatic bidirectional
Functions:Hours, minutes, seconds, chronograph
Bracelet & Strap

Steel Oyster Bracelet and Oysterlock Clasp

The Daytona 116520 super clone carries the steel Oyster bracelet, the three-piece-link design Rolex uses across its professional sport models. The bracelet uses brushed outer links with polished center links, and the Oysterlock folding clasp closes flush with a safety catch that guards against accidental opening.

Wrist Feel, Weight and Comfort

The watch weighs approximately 145 grams on the full steel bracelet, giving the solid wrist presence buyers expect from a steel Daytona. The 40mm case and the tapered Oyster bracelet sit comfortably on wrists from 6.5 to 8 inches. The clasp includes a fine-adjustment system for small length changes through the day.

OUR QUALITY PROMISE

Quality Checks Before Shipping

Every timepiece deserves careful attention before it reaches you. Before dispatch, each watch undergoes a visual inspection to review its overall appearance, finishing, and key components.

Visual Inspection

Checking the overall appearance, dial and finishing.

Component Review

Reviewing hands, case, bracelet and clasp.

Final Review

A final check before careful packaging and dispatch.

shopping with confidence

THE ELITE EXPERIENCE

A Better Way to Shop for Timepieces

Enjoy a more reassuring shopping experience with thoughtful service, added protection and convenient delivery with every order.

1-Year Warranty

Added peace of mind with 1-year warranty coverage.

Free Shipping

Complimentary shipping on your order.

Careful Packaging

Carefully packed to help protect your order during transit.