Rolex Daytona 116520 Super Clone: Blaken Blackout 40mm Black Dial

The Rolex Daytona 116520 Blaken super clone features the 40mm steel Cosmograph Daytona finished in a full blackout coating across the case, tachymeter bezel, and Oyster bracelet, paired with a black chronograph dial. This 116520 Super Clone follows the Blaken custom blackout treatment to 98% visual and dimensional parity with the genuine reference, priced at $1,499 against a genuine custom build that runs well above $20,000.

This Blaken blackout Daytona Super Clone uses a coated 904L stainless steel case, an engraved tachymeter bezel, three chronograph sub-dials, and screw-down chronograph pushers. A Swiss-grade clone of Rolex Caliber 4130 drives the chronograph at 28,800 vibrations per hour with a 72-hour power reserve. The watch ships from a top-tier specialist factory with a full quality control pass, insured worldwide delivery, and a 1-year limited warranty.

Reference 116520
Case 40mm × 12.5mm, blackout-coated steel
Dial Black with three chronograph sub-dials
Movement Swiss-grade Caliber 4130 clone, automatic chronograph
Power Reserve 72 hours
Frequency 28,800 vph (4 Hz)
Water Res. 100 meters
Crystal Sapphire, anti-reflective
Bezel Tachymeter scale, blackout-coated
Bracelet Oyster, three-piece links, blackout-coated, Oysterlock clasp
Functions Hours, minutes, small seconds, chronograph

$ 1,499

4-Stage QC

Verified factory

Insured Shipping

DHL · FedEx · 5–10 days

1-Year Warranty

Parts + servicing

Discreet Packaging

Signature required

SSL Secure

Description

Rolex Daytona 116520 Super Clone: Blaken Blackout 40mm Black Dial Overview

The Daytona 116520 is the steel Cosmograph Daytona Rolex produced from about 2000 to 2016, and this super clone presents it in the Blaken blackout style with a coated case, bezel, and bracelet over a black dial. This Blaken Daytona Super Clone follows the 116520 reference with three chronograph sub-dials, an engraved tachymeter bezel, and screw-down pushers for $1,499. Every proportion, sub-dial position, and bracelet link follows the genuine reference within tight production tolerance.

Case & Crystal

Case, Pushers and Tachymeter Bezel 40mm Blackout-Coated Build

The Rolex Daytona 116520 Blaken super clone carries a 40mm Oyster case measuring 12.5mm thick, built on a 904L stainless steel core and finished with a hard black coating across every surface. The blackout coating reproduces the Blaken DLC-style treatment, which gives the steel a deep matte-to-satin black tone and adds scratch resistance for daily wear.

Tachymeter Bezel and Chronograph Pushers

The fixed tachymeter bezel rings the dial with an engraved speed scale, and this super clone fills the engraving in contrasting tone so the numerals read clearly against the black coating. The two chronograph pushers screw down at 2 and 4 o’clock, and the Triplock screw-down crown sits between them at 3 o’clock. The screw-down pushers and crown together hold the case sealed during chronograph use.

Sapphire Crystal and Caseback

Scratch-resistant sapphire crystal with anti-reflective treatment covers the black dial for clear reading at any angle. The solid screw-down caseback seals the Caliber 4130 clone movement and holds water resistance to 100 meters. The blackout coating wraps the caseback as well, so the watch shows a consistent black finish from every angle.

Dial & Markers

Black Dial with Three Chronograph Sub-Dials

The black dial of this Daytona 116520 Blaken super clone carries a deep, even black that sits flush with the blackout-coated case for a single-tone look. The dial holds three recessed sub-dials, each set against the main surface with a fine snailed texture that catches light under the sapphire crystal.

Sub-Dial Layout and Chronograph Counters

The Daytona dial places the small seconds at 6 o’clock, the 30-minute chronograph counter at 3 o’clock, and the 12-hour chronograph counter at 9 o’clock. The central chronograph seconds hand sweeps the full dial when the chronograph runs and stops on command through the pushers. The Cosmograph Daytona carries no date function, so the dial stays symmetrical across all three counters.

Markers, Hands and Text

Applied hour markers with luminous fill ring the dial and stay legible against the black surface in low light. The hour and minute hands carry the same luminous treatment for a matched glow. The applied Rolex coronet sits at 12 o’clock with “Cosmograph Daytona” printed in crisp text, keeping the 116520 layout accurate under the blackout treatment.

Movement & Specifications

Swiss-Grade Caliber 4130 Clone Movement

The Rolex Daytona 116520 Blaken super clone runs on a Swiss-grade automatic chronograph movement engineered to reproduce the genuine Rolex Caliber 4130 in feel, frequency, and autonomy. The movement operates at 28,800 vibrations per hour, winds bidirectionally through a free-rotating rotor, and holds a 72-hour power reserve for a full weekend off the wrist.

Chronograph Operation and Accuracy

The chronograph starts, stops, and resets cleanly through the screw-down pushers, with the central seconds hand snapping back to zero on reset. Daily deviation holds within -5 to +8 seconds per day after factory regulation, close to the chronometer standard of the genuine Caliber 4130. The smooth sweeping seconds hand and the quiet winding rotor confirm the Swiss-grade build of this 116520 Super Clone.

Spec grid:

TypeAutomatic chronograph
Frequency28,800 vph (4 Hz)
Power Reserve72 hours
Jewels44
WindingAutomatic bidirectional
FunctionsHours, minutes, small seconds, chronograph
Bracelet & Strap

Blackout-Coated Oyster Bracelet and Oysterlock Clasp

The Daytona 116520 Blaken super clone carries the three-piece-link Oyster bracelet, the bracelet Rolex pairs with every steel Daytona. The bracelet wears the same blackout coating as the case and bezel, so the finish runs unbroken from the lugs to the clasp. The folding Oysterlock safety clasp closes with a firm click and holds the bracelet secure on the wrist.

Wrist Feel, Weight and Comfort

The watch weighs approximately 135 grams on the full bracelet, giving the solid wrist presence buyers expect from a steel Daytona. The Easylink extension inside the clasp adds about 5mm of length for fit through the day. The 40mm case and tapered Oyster bracelet sit comfortably on wrists from 6.5 to 8 inches, and the Daytona never uses a President bracelet.

Case, Pushers and Tachymeter Bezel 40mm Blackout-Coated Build

The Rolex Daytona 116520 Blaken super clone carries a 40mm Oyster case measuring 12.5mm thick, built on a 904L stainless steel core and finished with a hard black coating across every surface. The blackout coating reproduces the Blaken DLC-style treatment, which gives the steel a deep matte-to-satin black tone and adds scratch resistance for daily wear.

Tachymeter Bezel and Chronograph Pushers

The fixed tachymeter bezel rings the dial with an engraved speed scale, and this super clone fills the engraving in contrasting tone so the numerals read clearly against the black coating. The two chronograph pushers screw down at 2 and 4 o’clock, and the Triplock screw-down crown sits between them at 3 o’clock. The screw-down pushers and crown together hold the case sealed during chronograph use.

Sapphire Crystal and Caseback

Scratch-resistant sapphire crystal with anti-reflective treatment covers the black dial for clear reading at any angle. The solid screw-down caseback seals the Caliber 4130 clone movement and holds water resistance to 100 meters. The blackout coating wraps the caseback as well, so the watch shows a consistent black finish from every angle.

Black Dial with Three Chronograph Sub-Dials

The black dial of this Daytona 116520 Blaken super clone carries a deep, even black that sits flush with the blackout-coated case for a single-tone look. The dial holds three recessed sub-dials, each set against the main surface with a fine snailed texture that catches light under the sapphire crystal.

Sub-Dial Layout and Chronograph Counters

The Daytona dial places the small seconds at 6 o’clock, the 30-minute chronograph counter at 3 o’clock, and the 12-hour chronograph counter at 9 o’clock. The central chronograph seconds hand sweeps the full dial when the chronograph runs and stops on command through the pushers. The Cosmograph Daytona carries no date function, so the dial stays symmetrical across all three counters.

Markers, Hands and Text

Applied hour markers with luminous fill ring the dial and stay legible against the black surface in low light. The hour and minute hands carry the same luminous treatment for a matched glow. The applied Rolex coronet sits at 12 o’clock with “Cosmograph Daytona” printed in crisp text, keeping the 116520 layout accurate under the blackout treatment.

Swiss-Grade Caliber 4130 Clone Movement

The Rolex Daytona 116520 Blaken super clone runs on a Swiss-grade automatic chronograph movement engineered to reproduce the genuine Rolex Caliber 4130 in feel, frequency, and autonomy. The movement operates at 28,800 vibrations per hour, winds bidirectionally through a free-rotating rotor, and holds a 72-hour power reserve for a full weekend off the wrist.

Chronograph Operation and Accuracy

The chronograph starts, stops, and resets cleanly through the screw-down pushers, with the central seconds hand snapping back to zero on reset. Daily deviation holds within -5 to +8 seconds per day after factory regulation, close to the chronometer standard of the genuine Caliber 4130. The smooth sweeping seconds hand and the quiet winding rotor confirm the Swiss-grade build of this 116520 Super Clone.

Spec grid:

TypeAutomatic chronograph
Frequency28,800 vph (4 Hz)
Power Reserve72 hours
Jewels44
WindingAutomatic bidirectional
FunctionsHours, minutes, small seconds, chronograph

Blackout-Coated Oyster Bracelet and Oysterlock Clasp

The Daytona 116520 Blaken super clone carries the three-piece-link Oyster bracelet, the bracelet Rolex pairs with every steel Daytona. The bracelet wears the same blackout coating as the case and bezel, so the finish runs unbroken from the lugs to the clasp. The folding Oysterlock safety clasp closes with a firm click and holds the bracelet secure on the wrist.

Wrist Feel, Weight and Comfort

The watch weighs approximately 135 grams on the full bracelet, giving the solid wrist presence buyers expect from a steel Daytona. The Easylink extension inside the clasp adds about 5mm of length for fit through the day. The 40mm case and tapered Oyster bracelet sit comfortably on wrists from 6.5 to 8 inches, and the Daytona never uses a President bracelet.

Case & Crystal

Case, Pushers and Tachymeter Bezel 40mm Blackout-Coated Build

The Rolex Daytona 116520 Blaken super clone carries a 40mm Oyster case measuring 12.5mm thick, built on a 904L stainless steel core and finished with a hard black coating across every surface. The blackout coating reproduces the Blaken DLC-style treatment, which gives the steel a deep matte-to-satin black tone and adds scratch resistance for daily wear.

Tachymeter Bezel and Chronograph Pushers

The fixed tachymeter bezel rings the dial with an engraved speed scale, and this super clone fills the engraving in contrasting tone so the numerals read clearly against the black coating. The two chronograph pushers screw down at 2 and 4 o’clock, and the Triplock screw-down crown sits between them at 3 o’clock. The screw-down pushers and crown together hold the case sealed during chronograph use.

Sapphire Crystal and Caseback

Scratch-resistant sapphire crystal with anti-reflective treatment covers the black dial for clear reading at any angle. The solid screw-down caseback seals the Caliber 4130 clone movement and holds water resistance to 100 meters. The blackout coating wraps the caseback as well, so the watch shows a consistent black finish from every angle.

Dial & Markers

Black Dial with Three Chronograph Sub-Dials

The black dial of this Daytona 116520 Blaken super clone carries a deep, even black that sits flush with the blackout-coated case for a single-tone look. The dial holds three recessed sub-dials, each set against the main surface with a fine snailed texture that catches light under the sapphire crystal.

Sub-Dial Layout and Chronograph Counters

The Daytona dial places the small seconds at 6 o’clock, the 30-minute chronograph counter at 3 o’clock, and the 12-hour chronograph counter at 9 o’clock. The central chronograph seconds hand sweeps the full dial when the chronograph runs and stops on command through the pushers. The Cosmograph Daytona carries no date function, so the dial stays symmetrical across all three counters.

Markers, Hands and Text

Applied hour markers with luminous fill ring the dial and stay legible against the black surface in low light. The hour and minute hands carry the same luminous treatment for a matched glow. The applied Rolex coronet sits at 12 o’clock with “Cosmograph Daytona” printed in crisp text, keeping the 116520 layout accurate under the blackout treatment.

Movement & Specifications

Swiss-Grade Caliber 4130 Clone Movement

The Rolex Daytona 116520 Blaken super clone runs on a Swiss-grade automatic chronograph movement engineered to reproduce the genuine Rolex Caliber 4130 in feel, frequency, and autonomy. The movement operates at 28,800 vibrations per hour, winds bidirectionally through a free-rotating rotor, and holds a 72-hour power reserve for a full weekend off the wrist.

Chronograph Operation and Accuracy

The chronograph starts, stops, and resets cleanly through the screw-down pushers, with the central seconds hand snapping back to zero on reset. Daily deviation holds within -5 to +8 seconds per day after factory regulation, close to the chronometer standard of the genuine Caliber 4130. The smooth sweeping seconds hand and the quiet winding rotor confirm the Swiss-grade build of this 116520 Super Clone.

Spec grid:

TypeAutomatic chronograph
Frequency28,800 vph (4 Hz)
Power Reserve72 hours
Jewels44
WindingAutomatic bidirectional
FunctionsHours, minutes, small seconds, chronograph
Bracelet & Strap

Blackout-Coated Oyster Bracelet and Oysterlock Clasp

The Daytona 116520 Blaken super clone carries the three-piece-link Oyster bracelet, the bracelet Rolex pairs with every steel Daytona. The bracelet wears the same blackout coating as the case and bezel, so the finish runs unbroken from the lugs to the clasp. The folding Oysterlock safety clasp closes with a firm click and holds the bracelet secure on the wrist.

Wrist Feel, Weight and Comfort

The watch weighs approximately 135 grams on the full bracelet, giving the solid wrist presence buyers expect from a steel Daytona. The Easylink extension inside the clasp adds about 5mm of length for fit through the day. The 40mm case and tapered Oyster bracelet sit comfortably on wrists from 6.5 to 8 inches, and the Daytona never uses a President bracelet.

OUR QUALITY PROMISE

Quality Checks Before Shipping

Every timepiece deserves careful attention before it reaches you. Before dispatch, each watch undergoes a visual inspection to review its overall appearance, finishing, and key components.

Visual Inspection

Checking the overall appearance, dial and finishing.

Component Review

Reviewing hands, case, bracelet and clasp.

Final Review

A final check before careful packaging and dispatch.

shopping with confidence

THE ELITE EXPERIENCE

A Better Way to Shop for Timepieces

Enjoy a more reassuring shopping experience with thoughtful service, added protection and convenient delivery with every order.

1-Year Warranty

Added peace of mind with 1-year warranty coverage.

Free Shipping

Complimentary shipping on your order.

Careful Packaging

Carefully packed to help protect your order during transit.