Rolex Daytona 16520 Super Clone: 40mm Steel White Floating Cosmograph Dial

The Rolex Daytona 16520 super clone features the 40mm stainless steel “Zenith Daytona” paired with a white dial that shows the sought-after floating Cosmograph layout, finished to 98% visual and dimensional parity with the genuine reference. This 16520 Super Clone carries three black sub-dials, a steel tachymeter bezel, and screw-down chronograph pushers, priced at $1,399 against a genuine collector-market figure near $35,000.

This steel Daytona 16520 Super Clone uses a polished and brushed Oyster case, an engraved steel tachymeter bezel, and a three-link steel Oyster bracelet with a folding Oysterlock clasp. A Swiss-grade clone of Rolex Caliber 4030, the movement based on the Zenith El Primero, drives the chronograph at 28,800 vibrations per hour with a 50-hour power reserve. The watch ships from a top-tier specialist factory with a full quality control pass, insured worldwide delivery, and a 1-year limited warranty.

Reference 16520
Case 40mm × 13mm, 904L stainless steel
Dial White with black sub-dials, floating Cosmograph layout
Movement Swiss-grade Caliber 4030 clone, automatic chronograph
Power Reserve 50 hours
Frequency 28,800 vph (4 Hz)
Water Res. 100 meters
Crystal Sapphire, flat
Bezel Engraved steel tachymeter scale
Bracelet Oyster, three-link steel, Oysterlock clasp
Functions Hours, minutes, small seconds, chronograph, 30-minute and 12-hour counters

$ 1,399

4-Stage QC

Verified factory

Insured Shipping

DHL · FedEx · 5–10 days

1-Year Warranty

Parts + servicing

Discreet Packaging

Signature required

SSL Secure

Description

Rolex Daytona 16520 Super Clone: 40mm Steel White Floating Cosmograph Dial Overview

The Daytona 16520 is the steel chronograph Rolex produced from 1988 to 2000, the first Daytona with an automatic movement. This super clone reproduces the 16520 reference with a white dial, the floating Cosmograph dial layout, three black sub-dials, and a steel tachymeter bezel for $1,399. Every case angle, sub-dial ring, and bracelet link follows the genuine reference within tight production tolerance.

Case & Crystal

Case, Pushers and Tachymeter Bezel 40mm Steel Build

The Rolex Daytona 16520 super clone carries a 40mm Oyster case measuring 13mm thick, built from 904L stainless steel for corrosion resistance and a bright, hard-wearing finish. The case mixes brushed surfaces on the lugs and bezel sides with polished bevels for the contrast a steel sport Rolex shows.

Steel Tachymeter Bezel and Screw-Down Pushers

The engraved steel tachymeter bezel rings the dial with a graduated scale used to read average speed over a measured distance. Two screw-down chronograph pushers flank the Triplock screw-down crown at 3 o’clock, and each pusher threads shut to protect the chronograph and hold water resistance. The pushers unscrew for chronograph use and lock down again for daily wear.

Sapphire Crystal and Caseback

Scratch-resistant sapphire crystal covers the white dial and resists daily knocks for years of clear reading. The flat sapphire crystal carries no Cyclops lens, since the 16520 has no date function. The solid screw-down caseback seals the movement and supports water resistance to 100 meters through the Triplock crown system.

Dial & Markers

White Dial with Floating Cosmograph Layout

The white dial of this Daytona 16520 super clone shows the floating Cosmograph layout collectors search for on early steel 16520 watches. The word “Cosmograph” sits lower on the dial with a clear gap above it, separated from the model line, which makes the word appear to float. This dial trait appears on early production 16520 watches and identifies the most sought-after layout of the reference.

Three Sub-Dials and Chronograph Counters

The white dial carries three black sub-dials in the panda configuration, set at 3, 6, and 9 o’clock. The sub-dial at 9 o’clock runs the small seconds, the sub-dial at 3 o’clock counts elapsed minutes to 30, and the sub-dial at 6 o’clock counts elapsed hours to 12. The black sub-dials against the white dial give the high-contrast panda look the steel Daytona is known for.

Markers, Hands and Text

The dial holds applied luminous baton markers at every hour with a central chronograph seconds hand sweeping over the tachymeter reading. The applied Rolex coronet sits at 12 o’clock above “Rolex Oyster Perpetual Superlative Chronometer.” The “Cosmograph” line and “Daytona” in red print sit in the lower dial, with the floating gap above “Cosmograph” reproduced to match the genuine 16520.

Movement & Specifications

Swiss-Grade Caliber 4030 Clone Movement

The Rolex Daytona 16520 super clone runs on a Swiss-grade automatic chronograph movement engineered to reproduce the genuine Rolex Caliber 4030 in feel, frequency, and autonomy. The genuine Caliber 4030 is the Daytona movement based on the Zenith El Primero, modified by Rolex for the 16520 generation. The clone movement operates at 28,800 vibrations per hour, winds bidirectionally through a rotor, and holds a 50-hour power reserve.

Accuracy and Chronograph Performance

Daily deviation holds within -5 to +8 seconds per day after factory regulation, close to the chronometer standard of the genuine Caliber 4030. The central chronograph seconds hand starts, stops, and resets cleanly from the screw-down pushers. The smooth sweeping motion and the quiet rotor confirm the Swiss-grade build of this 16520 Super Clone.

Spec grid:

Type:Automatic chronograph
Base caliber:Caliber 4030 clone (Zenith El Primero base)
Frequency:28,800 vph (4 Hz)
Power Reserve:50 hours
Winding:Automatic bidirectional
Functions:Chronograph, small seconds, 30-minute and 12-hour counters
Bracelet & Strap

Steel Oyster Bracelet and Oysterlock Clasp

The Daytona 16520 super clone carries the steel Oyster bracelet, the three-link flat design Rolex pairs with its sport models. The bracelet uses 904L stainless steel to match the case, with brushed outer links and a folding Oysterlock safety clasp that closes flush against the wrist.

Wrist Feel, Weight and Comfort

The watch weighs approximately 145 grams on the full bracelet, giving the solid wrist presence buyers expect from a steel Daytona. The Oysterlock clasp adds a folding safety catch that holds the bracelet shut during active wear. The 40mm case and tapered Oyster bracelet sit comfortably on wrists from 6.5 to 8 inches.

Case, Pushers and Tachymeter Bezel 40mm Steel Build

The Rolex Daytona 16520 super clone carries a 40mm Oyster case measuring 13mm thick, built from 904L stainless steel for corrosion resistance and a bright, hard-wearing finish. The case mixes brushed surfaces on the lugs and bezel sides with polished bevels for the contrast a steel sport Rolex shows.

Steel Tachymeter Bezel and Screw-Down Pushers

The engraved steel tachymeter bezel rings the dial with a graduated scale used to read average speed over a measured distance. Two screw-down chronograph pushers flank the Triplock screw-down crown at 3 o’clock, and each pusher threads shut to protect the chronograph and hold water resistance. The pushers unscrew for chronograph use and lock down again for daily wear.

Sapphire Crystal and Caseback

Scratch-resistant sapphire crystal covers the white dial and resists daily knocks for years of clear reading. The flat sapphire crystal carries no Cyclops lens, since the 16520 has no date function. The solid screw-down caseback seals the movement and supports water resistance to 100 meters through the Triplock crown system.

White Dial with Floating Cosmograph Layout

The white dial of this Daytona 16520 super clone shows the floating Cosmograph layout collectors search for on early steel 16520 watches. The word “Cosmograph” sits lower on the dial with a clear gap above it, separated from the model line, which makes the word appear to float. This dial trait appears on early production 16520 watches and identifies the most sought-after layout of the reference.

Three Sub-Dials and Chronograph Counters

The white dial carries three black sub-dials in the panda configuration, set at 3, 6, and 9 o’clock. The sub-dial at 9 o’clock runs the small seconds, the sub-dial at 3 o’clock counts elapsed minutes to 30, and the sub-dial at 6 o’clock counts elapsed hours to 12. The black sub-dials against the white dial give the high-contrast panda look the steel Daytona is known for.

Markers, Hands and Text

The dial holds applied luminous baton markers at every hour with a central chronograph seconds hand sweeping over the tachymeter reading. The applied Rolex coronet sits at 12 o’clock above “Rolex Oyster Perpetual Superlative Chronometer.” The “Cosmograph” line and “Daytona” in red print sit in the lower dial, with the floating gap above “Cosmograph” reproduced to match the genuine 16520.

Swiss-Grade Caliber 4030 Clone Movement

The Rolex Daytona 16520 super clone runs on a Swiss-grade automatic chronograph movement engineered to reproduce the genuine Rolex Caliber 4030 in feel, frequency, and autonomy. The genuine Caliber 4030 is the Daytona movement based on the Zenith El Primero, modified by Rolex for the 16520 generation. The clone movement operates at 28,800 vibrations per hour, winds bidirectionally through a rotor, and holds a 50-hour power reserve.

Accuracy and Chronograph Performance

Daily deviation holds within -5 to +8 seconds per day after factory regulation, close to the chronometer standard of the genuine Caliber 4030. The central chronograph seconds hand starts, stops, and resets cleanly from the screw-down pushers. The smooth sweeping motion and the quiet rotor confirm the Swiss-grade build of this 16520 Super Clone.

Spec grid:

Type:Automatic chronograph
Base caliber:Caliber 4030 clone (Zenith El Primero base)
Frequency:28,800 vph (4 Hz)
Power Reserve:50 hours
Winding:Automatic bidirectional
Functions:Chronograph, small seconds, 30-minute and 12-hour counters

Steel Oyster Bracelet and Oysterlock Clasp

The Daytona 16520 super clone carries the steel Oyster bracelet, the three-link flat design Rolex pairs with its sport models. The bracelet uses 904L stainless steel to match the case, with brushed outer links and a folding Oysterlock safety clasp that closes flush against the wrist.

Wrist Feel, Weight and Comfort

The watch weighs approximately 145 grams on the full bracelet, giving the solid wrist presence buyers expect from a steel Daytona. The Oysterlock clasp adds a folding safety catch that holds the bracelet shut during active wear. The 40mm case and tapered Oyster bracelet sit comfortably on wrists from 6.5 to 8 inches.

Case & Crystal

Case, Pushers and Tachymeter Bezel 40mm Steel Build

The Rolex Daytona 16520 super clone carries a 40mm Oyster case measuring 13mm thick, built from 904L stainless steel for corrosion resistance and a bright, hard-wearing finish. The case mixes brushed surfaces on the lugs and bezel sides with polished bevels for the contrast a steel sport Rolex shows.

Steel Tachymeter Bezel and Screw-Down Pushers

The engraved steel tachymeter bezel rings the dial with a graduated scale used to read average speed over a measured distance. Two screw-down chronograph pushers flank the Triplock screw-down crown at 3 o’clock, and each pusher threads shut to protect the chronograph and hold water resistance. The pushers unscrew for chronograph use and lock down again for daily wear.

Sapphire Crystal and Caseback

Scratch-resistant sapphire crystal covers the white dial and resists daily knocks for years of clear reading. The flat sapphire crystal carries no Cyclops lens, since the 16520 has no date function. The solid screw-down caseback seals the movement and supports water resistance to 100 meters through the Triplock crown system.

Dial & Markers

White Dial with Floating Cosmograph Layout

The white dial of this Daytona 16520 super clone shows the floating Cosmograph layout collectors search for on early steel 16520 watches. The word “Cosmograph” sits lower on the dial with a clear gap above it, separated from the model line, which makes the word appear to float. This dial trait appears on early production 16520 watches and identifies the most sought-after layout of the reference.

Three Sub-Dials and Chronograph Counters

The white dial carries three black sub-dials in the panda configuration, set at 3, 6, and 9 o’clock. The sub-dial at 9 o’clock runs the small seconds, the sub-dial at 3 o’clock counts elapsed minutes to 30, and the sub-dial at 6 o’clock counts elapsed hours to 12. The black sub-dials against the white dial give the high-contrast panda look the steel Daytona is known for.

Markers, Hands and Text

The dial holds applied luminous baton markers at every hour with a central chronograph seconds hand sweeping over the tachymeter reading. The applied Rolex coronet sits at 12 o’clock above “Rolex Oyster Perpetual Superlative Chronometer.” The “Cosmograph” line and “Daytona” in red print sit in the lower dial, with the floating gap above “Cosmograph” reproduced to match the genuine 16520.

Movement & Specifications

Swiss-Grade Caliber 4030 Clone Movement

The Rolex Daytona 16520 super clone runs on a Swiss-grade automatic chronograph movement engineered to reproduce the genuine Rolex Caliber 4030 in feel, frequency, and autonomy. The genuine Caliber 4030 is the Daytona movement based on the Zenith El Primero, modified by Rolex for the 16520 generation. The clone movement operates at 28,800 vibrations per hour, winds bidirectionally through a rotor, and holds a 50-hour power reserve.

Accuracy and Chronograph Performance

Daily deviation holds within -5 to +8 seconds per day after factory regulation, close to the chronometer standard of the genuine Caliber 4030. The central chronograph seconds hand starts, stops, and resets cleanly from the screw-down pushers. The smooth sweeping motion and the quiet rotor confirm the Swiss-grade build of this 16520 Super Clone.

Spec grid:

Type:Automatic chronograph
Base caliber:Caliber 4030 clone (Zenith El Primero base)
Frequency:28,800 vph (4 Hz)
Power Reserve:50 hours
Winding:Automatic bidirectional
Functions:Chronograph, small seconds, 30-minute and 12-hour counters
Bracelet & Strap

Steel Oyster Bracelet and Oysterlock Clasp

The Daytona 16520 super clone carries the steel Oyster bracelet, the three-link flat design Rolex pairs with its sport models. The bracelet uses 904L stainless steel to match the case, with brushed outer links and a folding Oysterlock safety clasp that closes flush against the wrist.

Wrist Feel, Weight and Comfort

The watch weighs approximately 145 grams on the full bracelet, giving the solid wrist presence buyers expect from a steel Daytona. The Oysterlock clasp adds a folding safety catch that holds the bracelet shut during active wear. The 40mm case and tapered Oyster bracelet sit comfortably on wrists from 6.5 to 8 inches.

OUR QUALITY PROMISE

Quality Checks Before Shipping

Every timepiece deserves careful attention before it reaches you. Before dispatch, each watch undergoes a visual inspection to review its overall appearance, finishing, and key components.

Visual Inspection

Checking the overall appearance, dial and finishing.

Component Review

Reviewing hands, case, bracelet and clasp.

Final Review

A final check before careful packaging and dispatch.

shopping with confidence

THE ELITE EXPERIENCE

A Better Way to Shop for Timepieces

Enjoy a more reassuring shopping experience with thoughtful service, added protection and convenient delivery with every order.

1-Year Warranty

Added peace of mind with 1-year warranty coverage.

Free Shipping

Complimentary shipping on your order.

Careful Packaging

Carefully packed to help protect your order during transit.