Rolex Daytona 16528 Super Clone: 40mm Yellow Gold Black Dial Cosmograph

The Rolex Daytona 16528 super clone features the 40mm yellow gold Cosmograph paired with a black dial for sharp gold-to-dark contrast, finished to 98% visual and dimensional parity with the genuine reference. This 16528 Super Clone carries the three chronograph sub-dials, the engraved yellow gold tachymeter bezel, and screw-down chronograph pushers, priced at $1,499 against a genuine secondary-market figure near $35,000.

This yellow gold Daytona Super Clone uses a polished yellow gold-tone case, a gold tachymeter bezel scaled to 400 units per hour, and the three-piece-link Oyster bracelet with a folding Oysterlock clasp. A Swiss-grade clone of Rolex Caliber 4030 drives the chronograph at 28,800 vibrations per hour with a 50-hour power reserve. The watch ships from a top-tier specialist factory with a full quality control pass, insured worldwide delivery, and a 1-year limited warranty.

Reference 16528
Case 40mm × 13mm, 18k yellow gold-tone
Dial Black with three sub-dials
Movement Swiss-grade Caliber 4030 clone, automatic chronograph
Power Reserve 50 hours
Frequency 28,800 vph (4 Hz)
Water Res. 100 meters
Crystal Sapphire, flat
Bezel Engraved tachymeter, yellow gold-tone
Bracelet Oyster, three-piece links, folding Oysterlock clasp
Functions Hours, minutes, small seconds, chronograph with 30-minute and 12-hour counters

$ 1,499

4-Stage QC

Verified factory

Insured Shipping

DHL · FedEx · 5–10 days

1-Year Warranty

Parts + servicing

Discreet Packaging

Signature required

SSL Secure

Description

Rolex Daytona 16528 Super Clone: 40mm Yellow Gold Black Dial Cosmograph Overview

The Daytona 16528 is the 18k yellow gold version of the Rolex Cosmograph Daytona from the Zenith generation, paired here with a black dial and the engraved gold tachymeter bezel. This super clone reproduces the 16528 reference with three chronograph sub-dials, an Oyster bracelet, and screw-down pushers for $1,499. Every proportion, bezel marking, and bracelet link follows the genuine reference within tight production tolerance.

Case & Crystal

Case, Pushers and Tachymeter Bezel 40mm Yellow Gold-Tone Build

The Rolex Daytona 16528 super clone carries a 40mm Oyster case measuring 13mm thick, built on a 904L stainless steel core with a high-grade yellow gold-tone finish for accurate color and long-term wear. Two screw-down chronograph pushers flank the screw-down crown at 3 o’clock, each unscrewing to operate the chronograph and locking back down to hold water resistance.

Gold Tachymeter Bezel and Finishing

The engraved tachymeter bezel rings the dial with a scale that reads up to 400 units per hour for measuring average speed over a fixed distance. This super clone cuts and fills the tachymeter numerals cleanly so the scale stays sharp against the gold surface. Mirror-polished surfaces wrap the case and the bezel for the bright look yellow gold is known for, and the Triplock screw-down crown carries the engraved Rolex coronet.

Sapphire Crystal and Caseback

Scratch-resistant sapphire crystal covers the black dial and resists daily knocks for years of clear reading. The flat crystal sits without a Cyclops lens, since the Daytona 16528 carries no date function. The solid screw-down caseback seals the chronograph movement and holds water resistance to 100 meters, supported by the Triplock crown and the two screw-down pushers.

Dial & Markers

Black Dial with Three Chronograph Sub-Dials

The black dial of this Daytona 16528 super clone carries a deep, even black that frames the warm yellow gold case with strong contrast. The dial holds three sub-dials in a contrasting tone, applied gold-tone hour markers, and the printed tachymeter reference around the chapter ring.

Sub-Dial Layout and Chronograph Counters

The three sub-dials sit at 3, 6, and 9 o’clock on this 16528 Super Clone. The sub-dial at 9 o’clock runs the small seconds, the sub-dial at 3 o’clock counts elapsed minutes up to 30, and the sub-dial at 6 o’clock counts elapsed hours up to 12. The central chronograph seconds hand sweeps the full dial when the chronograph is running and returns to zero on reset.

Logo, Text and Hands

The applied Rolex coronet sits at 12 o’clock, with “Rolex Oyster Perpetual Superlative Chronometer Cosmograph” printed in crisp, fine text and “Daytona” curved above the 6 o’clock counter. Gold-tone baton hands carry luminous fill for the hours and minutes. The black dial and gold markers give the 16528 the high-contrast Cosmograph look that defines the Zenith-era Daytona.

Movement & Specifications

Swiss-Grade Caliber 4030 Clone Movement

The Rolex Daytona 16528 super clone runs on a Swiss-grade automatic chronograph movement engineered to reproduce the genuine Rolex Caliber 4030 in feel, frequency, and autonomy. Rolex based the genuine Caliber 4030 on the Zenith El Primero, and this clone matches that lineage with a self-winding chronograph that operates at 28,800 vibrations per hour and holds a 50-hour power reserve.

Accuracy and Chronograph Performance

Daily deviation holds within -5 to +8 seconds per day after factory regulation, close to the chronometer standard of the genuine Caliber 4030. The central chronograph seconds hand starts, stops, and resets cleanly through the two screw-down pushers. The 30-minute and 12-hour counters track elapsed time accurately, and the smooth small-seconds hand confirms the Swiss-grade build.

Spec grid:

Type:Automatic chronograph
Power Reserve:50 hours
Jewels:31
Winding:Automatic bidirectional
Functions:Hours, minutes, small seconds, 30-minute counter, 12-hour counter
Bracelet & Strap

Yellow Gold Oyster Bracelet and Oysterlock Clasp

The Daytona 16528 super clone carries the Oyster bracelet, the three-piece-link design Rolex uses across its sport models, and never a President bracelet. The bracelet uses a yellow gold-tone finish to match the case and the tachymeter bezel, with flat three-piece links that close on a folding Oysterlock safety clasp.

Wrist Feel, Weight and Comfort

The watch weighs approximately 150 grams on the full bracelet, giving the substantial wrist presence buyers expect from a gold Daytona. The folding Oysterlock clasp closes flush and adds a safety catch to guard against accidental opening. The 40mm case and tapered bracelet sit comfortably on wrists from 6.5 to 8 inches.

Case, Pushers and Tachymeter Bezel 40mm Yellow Gold-Tone Build

The Rolex Daytona 16528 super clone carries a 40mm Oyster case measuring 13mm thick, built on a 904L stainless steel core with a high-grade yellow gold-tone finish for accurate color and long-term wear. Two screw-down chronograph pushers flank the screw-down crown at 3 o’clock, each unscrewing to operate the chronograph and locking back down to hold water resistance.

Gold Tachymeter Bezel and Finishing

The engraved tachymeter bezel rings the dial with a scale that reads up to 400 units per hour for measuring average speed over a fixed distance. This super clone cuts and fills the tachymeter numerals cleanly so the scale stays sharp against the gold surface. Mirror-polished surfaces wrap the case and the bezel for the bright look yellow gold is known for, and the Triplock screw-down crown carries the engraved Rolex coronet.

Sapphire Crystal and Caseback

Scratch-resistant sapphire crystal covers the black dial and resists daily knocks for years of clear reading. The flat crystal sits without a Cyclops lens, since the Daytona 16528 carries no date function. The solid screw-down caseback seals the chronograph movement and holds water resistance to 100 meters, supported by the Triplock crown and the two screw-down pushers.

Black Dial with Three Chronograph Sub-Dials

The black dial of this Daytona 16528 super clone carries a deep, even black that frames the warm yellow gold case with strong contrast. The dial holds three sub-dials in a contrasting tone, applied gold-tone hour markers, and the printed tachymeter reference around the chapter ring.

Sub-Dial Layout and Chronograph Counters

The three sub-dials sit at 3, 6, and 9 o’clock on this 16528 Super Clone. The sub-dial at 9 o’clock runs the small seconds, the sub-dial at 3 o’clock counts elapsed minutes up to 30, and the sub-dial at 6 o’clock counts elapsed hours up to 12. The central chronograph seconds hand sweeps the full dial when the chronograph is running and returns to zero on reset.

Logo, Text and Hands

The applied Rolex coronet sits at 12 o’clock, with “Rolex Oyster Perpetual Superlative Chronometer Cosmograph” printed in crisp, fine text and “Daytona” curved above the 6 o’clock counter. Gold-tone baton hands carry luminous fill for the hours and minutes. The black dial and gold markers give the 16528 the high-contrast Cosmograph look that defines the Zenith-era Daytona.

Swiss-Grade Caliber 4030 Clone Movement

The Rolex Daytona 16528 super clone runs on a Swiss-grade automatic chronograph movement engineered to reproduce the genuine Rolex Caliber 4030 in feel, frequency, and autonomy. Rolex based the genuine Caliber 4030 on the Zenith El Primero, and this clone matches that lineage with a self-winding chronograph that operates at 28,800 vibrations per hour and holds a 50-hour power reserve.

Accuracy and Chronograph Performance

Daily deviation holds within -5 to +8 seconds per day after factory regulation, close to the chronometer standard of the genuine Caliber 4030. The central chronograph seconds hand starts, stops, and resets cleanly through the two screw-down pushers. The 30-minute and 12-hour counters track elapsed time accurately, and the smooth small-seconds hand confirms the Swiss-grade build.

Spec grid:

Type:Automatic chronograph
Power Reserve:50 hours
Jewels:31
Winding:Automatic bidirectional
Functions:Hours, minutes, small seconds, 30-minute counter, 12-hour counter

Yellow Gold Oyster Bracelet and Oysterlock Clasp

The Daytona 16528 super clone carries the Oyster bracelet, the three-piece-link design Rolex uses across its sport models, and never a President bracelet. The bracelet uses a yellow gold-tone finish to match the case and the tachymeter bezel, with flat three-piece links that close on a folding Oysterlock safety clasp.

Wrist Feel, Weight and Comfort

The watch weighs approximately 150 grams on the full bracelet, giving the substantial wrist presence buyers expect from a gold Daytona. The folding Oysterlock clasp closes flush and adds a safety catch to guard against accidental opening. The 40mm case and tapered bracelet sit comfortably on wrists from 6.5 to 8 inches.

Case & Crystal

Case, Pushers and Tachymeter Bezel 40mm Yellow Gold-Tone Build

The Rolex Daytona 16528 super clone carries a 40mm Oyster case measuring 13mm thick, built on a 904L stainless steel core with a high-grade yellow gold-tone finish for accurate color and long-term wear. Two screw-down chronograph pushers flank the screw-down crown at 3 o’clock, each unscrewing to operate the chronograph and locking back down to hold water resistance.

Gold Tachymeter Bezel and Finishing

The engraved tachymeter bezel rings the dial with a scale that reads up to 400 units per hour for measuring average speed over a fixed distance. This super clone cuts and fills the tachymeter numerals cleanly so the scale stays sharp against the gold surface. Mirror-polished surfaces wrap the case and the bezel for the bright look yellow gold is known for, and the Triplock screw-down crown carries the engraved Rolex coronet.

Sapphire Crystal and Caseback

Scratch-resistant sapphire crystal covers the black dial and resists daily knocks for years of clear reading. The flat crystal sits without a Cyclops lens, since the Daytona 16528 carries no date function. The solid screw-down caseback seals the chronograph movement and holds water resistance to 100 meters, supported by the Triplock crown and the two screw-down pushers.

Dial & Markers

Black Dial with Three Chronograph Sub-Dials

The black dial of this Daytona 16528 super clone carries a deep, even black that frames the warm yellow gold case with strong contrast. The dial holds three sub-dials in a contrasting tone, applied gold-tone hour markers, and the printed tachymeter reference around the chapter ring.

Sub-Dial Layout and Chronograph Counters

The three sub-dials sit at 3, 6, and 9 o’clock on this 16528 Super Clone. The sub-dial at 9 o’clock runs the small seconds, the sub-dial at 3 o’clock counts elapsed minutes up to 30, and the sub-dial at 6 o’clock counts elapsed hours up to 12. The central chronograph seconds hand sweeps the full dial when the chronograph is running and returns to zero on reset.

Logo, Text and Hands

The applied Rolex coronet sits at 12 o’clock, with “Rolex Oyster Perpetual Superlative Chronometer Cosmograph” printed in crisp, fine text and “Daytona” curved above the 6 o’clock counter. Gold-tone baton hands carry luminous fill for the hours and minutes. The black dial and gold markers give the 16528 the high-contrast Cosmograph look that defines the Zenith-era Daytona.

Movement & Specifications

Swiss-Grade Caliber 4030 Clone Movement

The Rolex Daytona 16528 super clone runs on a Swiss-grade automatic chronograph movement engineered to reproduce the genuine Rolex Caliber 4030 in feel, frequency, and autonomy. Rolex based the genuine Caliber 4030 on the Zenith El Primero, and this clone matches that lineage with a self-winding chronograph that operates at 28,800 vibrations per hour and holds a 50-hour power reserve.

Accuracy and Chronograph Performance

Daily deviation holds within -5 to +8 seconds per day after factory regulation, close to the chronometer standard of the genuine Caliber 4030. The central chronograph seconds hand starts, stops, and resets cleanly through the two screw-down pushers. The 30-minute and 12-hour counters track elapsed time accurately, and the smooth small-seconds hand confirms the Swiss-grade build.

Spec grid:

Type:Automatic chronograph
Power Reserve:50 hours
Jewels:31
Winding:Automatic bidirectional
Functions:Hours, minutes, small seconds, 30-minute counter, 12-hour counter
Bracelet & Strap

Yellow Gold Oyster Bracelet and Oysterlock Clasp

The Daytona 16528 super clone carries the Oyster bracelet, the three-piece-link design Rolex uses across its sport models, and never a President bracelet. The bracelet uses a yellow gold-tone finish to match the case and the tachymeter bezel, with flat three-piece links that close on a folding Oysterlock safety clasp.

Wrist Feel, Weight and Comfort

The watch weighs approximately 150 grams on the full bracelet, giving the substantial wrist presence buyers expect from a gold Daytona. The folding Oysterlock clasp closes flush and adds a safety catch to guard against accidental opening. The 40mm case and tapered bracelet sit comfortably on wrists from 6.5 to 8 inches.

OUR QUALITY PROMISE

Quality Checks Before Shipping

Every timepiece deserves careful attention before it reaches you. Before dispatch, each watch undergoes a visual inspection to review its overall appearance, finishing, and key components.

Visual Inspection

Checking the overall appearance, dial and finishing.

Component Review

Reviewing hands, case, bracelet and clasp.

Final Review

A final check before careful packaging and dispatch.

shopping with confidence

THE ELITE EXPERIENCE

A Better Way to Shop for Timepieces

Enjoy a more reassuring shopping experience with thoughtful service, added protection and convenient delivery with every order.

1-Year Warranty

Added peace of mind with 1-year warranty coverage.

Free Shipping

Complimentary shipping on your order.

Careful Packaging

Carefully packed to help protect your order during transit.