Rolex Daytona Super Clone Carbon Red Speedster: 40mm NTPT Carbon Red Dial

The Rolex Daytona Carbon Red Speedster super clone is a custom Cosmograph Daytona build that pairs a 40mm forged NTPT carbon-composite case with a bold red motorsport dial, finished to 98% visual and dimensional parity with a genuine-grade Daytona chronograph. This Carbon Red Speedster super clone carries the tachymetric scale bezel, three chronograph sub-dials, and screw-down chronograph pushers, priced at $1,549 against a comparable genuine carbon-cased chronograph near $50,000.

This carbon custom Daytona super clone uses a layered NTPT carbon case and matching carbon bezel, a red lacquer dial with motorsport-style accents, and a black rubber strap with a folding clasp. A Swiss-grade clone of Rolex Caliber 4130 drives the chronograph at 28,800 vibrations per hour with a 72-hour power reserve. The Carbon Red Speedster ships from a top-tier specialist factory that produces the complete watch, with a full quality control pass, insured worldwide delivery, and a 1-year limited warranty.

Reference Carbon Red Speedster (SKU 116503-NTPT)
Case 40mm × 12.4mm, forged NTPT carbon composite
Dial Red lacquer with motorsport accents
Movement Swiss-grade Caliber 4130 clone, automatic chronograph
Power Reserve 72 hours
Frequency 28,800 vph (4 Hz)
Water Res. 100 meters
Crystal Sapphire, anti-reflective coating
Bezel Tachymetric scale, NTPT carbon
Functions Hours, minutes, small seconds, chronograph
Strap Black rubber with folding clasp

$ 1,549

4-Stage QC

Verified factory

Insured Shipping

DHL · FedEx · 5–10 days

1-Year Warranty

Parts + servicing

Discreet Packaging

Signature required

SSL Secure

Description

Rolex Daytona Super Clone Carbon Red Speedster: 40mm NTPT Carbon Red Dial Overview

The Daytona Carbon Red Speedster is a custom Cosmograph Daytona built in forged NTPT carbon composite with a red motorsport dial. This super clone follows the 40mm Daytona case proportions, the tachymetric bezel, and the three-sub-dial chronograph layout for $1,549. Every case angle, bezel scale, and sub-dial position follows the Daytona chronograph format within tight production tolerance.

Case & Crystal

Case, Pushers and Carbon Bezel 40mm Forged NTPT Carbon Build

The Rolex Daytona Carbon Red Speedster super clone carries a 40mm Oyster-format case measuring 12.4mm thick, built from forged NTPT carbon composite for a light wrist weight and a distinct layered grain. NTPT carbon is a thin-ply carbon material that compresses dozens of carbon layers under heat and pressure, and each finished case shows a unique marbled pattern across the surface.

Tachymetric Bezel and Screw-Down Pushers

The bezel of this Carbon Red Speedster super clone carries a tachymetric scale in matching NTPT carbon, which lets the wearer read average speed over a measured distance. The two screw-down chronograph pushers sit at 2 and 4 o’clock around the screw-down winding crown, and they lock down to protect the chronograph mechanism and hold water resistance during daily wear.

Sapphire Crystal, Caseback and Water Resistance

Scratch-resistant sapphire crystal with anti-reflective coating covers the red dial and resists daily knocks for years of clear reading. The solid screw-down caseback seals the Caliber 4130 clone movement and supports water resistance to 100 meters. The carbon case, the locked pushers, and the screw-down crown work together to keep the Carbon Red Speedster sealed against dust and moisture.

Dial & Markers

 Red Motorsport Dial with Three Chronograph Sub-Dials

The red dial of this Daytona Carbon Red Speedster super clone carries a deep red lacquer finish that gives the watch its Speedster identity and a strong motorsport look. The dial holds three recessed chronograph sub-dials, applied hour markers with luminous fill, and crisp printed text against the bright red surface.

Sub-Dial Layout and Chronograph Hands

The three sub-dials sit in the standard Daytona arrangement, with small running seconds at 6 o’clock, the 30-minute counter at 3 o’clock, and the 12-hour counter at 9 o’clock. The central chronograph seconds hand sweeps across the full dial when the chronograph runs, and the contrast sub-dial rings keep each counter easy to read against the red base.

Logo, Text and Motorsport Accents

The applied Rolex coronet sits at 12 o’clock above “Rolex Cosmograph Daytona” printed in fine, crisp text. The minute and seconds tracks frame the dial edge with even spacing. White and black motorsport-style accents on the sub-dial rings and the chronograph scale give the Carbon Red Speedster a sharp, race-inspired balance against the carbon case.

Movement & Specifications

Swiss-Grade Caliber 4130 Clone Movement

The Rolex Daytona Carbon Red Speedster super clone runs on a Swiss-grade automatic chronograph movement engineered to reproduce the genuine Rolex Caliber 4130 in feel, frequency, and chronograph action. The movement operates at 28,800 vibrations per hour, winds bidirectionally through a free-rotating rotor, and holds a 72-hour power reserve for three days off the wrist.

Accuracy and Chronograph Performance

Daily deviation holds within -5 to +8 seconds per day after factory regulation, close to the chronometer standard of the genuine Caliber 4130. The chronograph starts, stops, and resets cleanly through the screw-down pushers, and the central seconds hand returns to zero on reset. The smooth sweeping motion and the quiet rotor confirm the Swiss-grade build of the Carbon Red Speedster.

Spec grid:

Type:Automatic chronograph
Frequency:28,800 vph (4 Hz)
Power Reserve:72 hours
Jewels:44
Winding:Automatic bidirectional
Functions:Hours, minutes, small seconds, chronograph
Bracelet & Strap

Black Rubber Strap and Folding Clasp

The Daytona Carbon Red Speedster super clone carries a black rubber strap rather than an Oyster bracelet, a pairing that matches the carbon case and the motorsport theme of the build. The strap uses a textured surface for grip and a folding clasp that closes flush against the wrist for a secure hold.

Wrist Feel, Weight and Comfort

 

The watch weighs approximately 95 grams on the rubber strap, lighter than a steel Daytona because of the forged carbon case. The flexible rubber strap follows the wrist and stays comfortable through the day, including in warm weather. The 40mm carbon case and the soft strap sit comfortably on wrists from 6.5 to 8 inches.

Case, Pushers and Carbon Bezel 40mm Forged NTPT Carbon Build

The Rolex Daytona Carbon Red Speedster super clone carries a 40mm Oyster-format case measuring 12.4mm thick, built from forged NTPT carbon composite for a light wrist weight and a distinct layered grain. NTPT carbon is a thin-ply carbon material that compresses dozens of carbon layers under heat and pressure, and each finished case shows a unique marbled pattern across the surface.

Tachymetric Bezel and Screw-Down Pushers

The bezel of this Carbon Red Speedster super clone carries a tachymetric scale in matching NTPT carbon, which lets the wearer read average speed over a measured distance. The two screw-down chronograph pushers sit at 2 and 4 o’clock around the screw-down winding crown, and they lock down to protect the chronograph mechanism and hold water resistance during daily wear.

Sapphire Crystal, Caseback and Water Resistance

Scratch-resistant sapphire crystal with anti-reflective coating covers the red dial and resists daily knocks for years of clear reading. The solid screw-down caseback seals the Caliber 4130 clone movement and supports water resistance to 100 meters. The carbon case, the locked pushers, and the screw-down crown work together to keep the Carbon Red Speedster sealed against dust and moisture.

 Red Motorsport Dial with Three Chronograph Sub-Dials

The red dial of this Daytona Carbon Red Speedster super clone carries a deep red lacquer finish that gives the watch its Speedster identity and a strong motorsport look. The dial holds three recessed chronograph sub-dials, applied hour markers with luminous fill, and crisp printed text against the bright red surface.

Sub-Dial Layout and Chronograph Hands

The three sub-dials sit in the standard Daytona arrangement, with small running seconds at 6 o’clock, the 30-minute counter at 3 o’clock, and the 12-hour counter at 9 o’clock. The central chronograph seconds hand sweeps across the full dial when the chronograph runs, and the contrast sub-dial rings keep each counter easy to read against the red base.

Logo, Text and Motorsport Accents

The applied Rolex coronet sits at 12 o’clock above “Rolex Cosmograph Daytona” printed in fine, crisp text. The minute and seconds tracks frame the dial edge with even spacing. White and black motorsport-style accents on the sub-dial rings and the chronograph scale give the Carbon Red Speedster a sharp, race-inspired balance against the carbon case.

Swiss-Grade Caliber 4130 Clone Movement

The Rolex Daytona Carbon Red Speedster super clone runs on a Swiss-grade automatic chronograph movement engineered to reproduce the genuine Rolex Caliber 4130 in feel, frequency, and chronograph action. The movement operates at 28,800 vibrations per hour, winds bidirectionally through a free-rotating rotor, and holds a 72-hour power reserve for three days off the wrist.

Accuracy and Chronograph Performance

Daily deviation holds within -5 to +8 seconds per day after factory regulation, close to the chronometer standard of the genuine Caliber 4130. The chronograph starts, stops, and resets cleanly through the screw-down pushers, and the central seconds hand returns to zero on reset. The smooth sweeping motion and the quiet rotor confirm the Swiss-grade build of the Carbon Red Speedster.

Spec grid:

Type:Automatic chronograph
Frequency:28,800 vph (4 Hz)
Power Reserve:72 hours
Jewels:44
Winding:Automatic bidirectional
Functions:Hours, minutes, small seconds, chronograph

Black Rubber Strap and Folding Clasp

The Daytona Carbon Red Speedster super clone carries a black rubber strap rather than an Oyster bracelet, a pairing that matches the carbon case and the motorsport theme of the build. The strap uses a textured surface for grip and a folding clasp that closes flush against the wrist for a secure hold.

Wrist Feel, Weight and Comfort

 

The watch weighs approximately 95 grams on the rubber strap, lighter than a steel Daytona because of the forged carbon case. The flexible rubber strap follows the wrist and stays comfortable through the day, including in warm weather. The 40mm carbon case and the soft strap sit comfortably on wrists from 6.5 to 8 inches.

Case & Crystal

Case, Pushers and Carbon Bezel 40mm Forged NTPT Carbon Build

The Rolex Daytona Carbon Red Speedster super clone carries a 40mm Oyster-format case measuring 12.4mm thick, built from forged NTPT carbon composite for a light wrist weight and a distinct layered grain. NTPT carbon is a thin-ply carbon material that compresses dozens of carbon layers under heat and pressure, and each finished case shows a unique marbled pattern across the surface.

Tachymetric Bezel and Screw-Down Pushers

The bezel of this Carbon Red Speedster super clone carries a tachymetric scale in matching NTPT carbon, which lets the wearer read average speed over a measured distance. The two screw-down chronograph pushers sit at 2 and 4 o’clock around the screw-down winding crown, and they lock down to protect the chronograph mechanism and hold water resistance during daily wear.

Sapphire Crystal, Caseback and Water Resistance

Scratch-resistant sapphire crystal with anti-reflective coating covers the red dial and resists daily knocks for years of clear reading. The solid screw-down caseback seals the Caliber 4130 clone movement and supports water resistance to 100 meters. The carbon case, the locked pushers, and the screw-down crown work together to keep the Carbon Red Speedster sealed against dust and moisture.

Dial & Markers

 Red Motorsport Dial with Three Chronograph Sub-Dials

The red dial of this Daytona Carbon Red Speedster super clone carries a deep red lacquer finish that gives the watch its Speedster identity and a strong motorsport look. The dial holds three recessed chronograph sub-dials, applied hour markers with luminous fill, and crisp printed text against the bright red surface.

Sub-Dial Layout and Chronograph Hands

The three sub-dials sit in the standard Daytona arrangement, with small running seconds at 6 o’clock, the 30-minute counter at 3 o’clock, and the 12-hour counter at 9 o’clock. The central chronograph seconds hand sweeps across the full dial when the chronograph runs, and the contrast sub-dial rings keep each counter easy to read against the red base.

Logo, Text and Motorsport Accents

The applied Rolex coronet sits at 12 o’clock above “Rolex Cosmograph Daytona” printed in fine, crisp text. The minute and seconds tracks frame the dial edge with even spacing. White and black motorsport-style accents on the sub-dial rings and the chronograph scale give the Carbon Red Speedster a sharp, race-inspired balance against the carbon case.

Movement & Specifications

Swiss-Grade Caliber 4130 Clone Movement

The Rolex Daytona Carbon Red Speedster super clone runs on a Swiss-grade automatic chronograph movement engineered to reproduce the genuine Rolex Caliber 4130 in feel, frequency, and chronograph action. The movement operates at 28,800 vibrations per hour, winds bidirectionally through a free-rotating rotor, and holds a 72-hour power reserve for three days off the wrist.

Accuracy and Chronograph Performance

Daily deviation holds within -5 to +8 seconds per day after factory regulation, close to the chronometer standard of the genuine Caliber 4130. The chronograph starts, stops, and resets cleanly through the screw-down pushers, and the central seconds hand returns to zero on reset. The smooth sweeping motion and the quiet rotor confirm the Swiss-grade build of the Carbon Red Speedster.

Spec grid:

Type:Automatic chronograph
Frequency:28,800 vph (4 Hz)
Power Reserve:72 hours
Jewels:44
Winding:Automatic bidirectional
Functions:Hours, minutes, small seconds, chronograph
Bracelet & Strap

Black Rubber Strap and Folding Clasp

The Daytona Carbon Red Speedster super clone carries a black rubber strap rather than an Oyster bracelet, a pairing that matches the carbon case and the motorsport theme of the build. The strap uses a textured surface for grip and a folding clasp that closes flush against the wrist for a secure hold.

Wrist Feel, Weight and Comfort

 

The watch weighs approximately 95 grams on the rubber strap, lighter than a steel Daytona because of the forged carbon case. The flexible rubber strap follows the wrist and stays comfortable through the day, including in warm weather. The 40mm carbon case and the soft strap sit comfortably on wrists from 6.5 to 8 inches.

OUR QUALITY PROMISE

Quality Checks Before Shipping

Every timepiece deserves careful attention before it reaches you. Before dispatch, each watch undergoes a visual inspection to review its overall appearance, finishing, and key components.

Visual Inspection

Checking the overall appearance, dial and finishing.

Component Review

Reviewing hands, case, bracelet and clasp.

Final Review

A final check before careful packaging and dispatch.

shopping with confidence

THE ELITE EXPERIENCE

A Better Way to Shop for Timepieces

Enjoy a more reassuring shopping experience with thoughtful service, added protection and convenient delivery with every order.

1-Year Warranty

Added peace of mind with 1-year warranty coverage.

Free Shipping

Complimentary shipping on your order.

Careful Packaging

Carefully packed to help protect your order during transit.