Rolex Daytona Super Clone DiW NTPT Carbon 46490: All Carbon Lemon Edition

The Rolex Daytona DiW NTPT Carbon 46490 super clone features a 40mm forged carbon-composite case paired with a carbon-finish dial and bright lemon-yellow chronograph accents, finished to 98% visual and dimensional parity with a DiW carbon Daytona build. This 46490 All Carbon Lemon Edition Super Clone carries three chronograph sub-dials, a forged NTPT carbon bezel with a tachymetric scale, and a black rubber strap, priced at $1,549 against a genuine DiW carbon Daytona that trades near $48,000.

This All Carbon Lemon Edition Super Clone uses a layered NTPT carbon case and matching bezel, a carbon-textured dial with lemon-yellow sub-dial rings and accents, and screw-down chronograph pushers. A Swiss-grade clone of Rolex Caliber 4130 drives the chronograph at 28,800 vibrations per hour with a 72-hour power reserve. The watch ships from a top-tier specialist factory with a full quality control pass, insured worldwide delivery, and a 1-year limited warranty.

Reference DiW Carbon 46490
Case 40mm × 12.4mm, forged NTPT carbon
Dial Carbon-finish with lemon-yellow accents
Movement Swiss-grade Caliber 4130 clone, automatic chronograph
Power Reserve 72 hours
Frequency 28,800 vph (4 Hz)
Water Res. 100 meters
Crystal Sapphire, anti-reflective coating
Bezel Forged NTPT carbon, tachymetric scale
Functions Hours, minutes, small seconds, chronograph
Strap Black rubber with folding clasp

$ 1,549

4-Stage QC

Verified factory

Insured Shipping

DHL · FedEx · 5–10 days

1-Year Warranty

Parts + servicing

Discreet Packaging

Signature required

SSL Secure

Description

Rolex Daytona Super Clone DiW NTPT Carbon 46490: All Carbon Lemon Edition Overview

The Daytona DiW NTPT Carbon 46490 is a carbon-composite custom build based on the modern Rolex Cosmograph Daytona, finished here as the All Carbon Lemon Edition with bright lemon-yellow accents. This super clone matches the DiW 46490 build with a forged NTPT carbon case and bezel, a carbon dial, three chronograph sub-dials, and a black rubber strap for $1,549. Every case layer, bezel scale, and sub-dial ring follows the DiW reference within tight production tolerance.

Case & Crystal

Forged NTPT Carbon Case 40mm All Carbon Build

The Rolex Daytona DiW Carbon 46490 super clone carries a 40mm Oyster-profile case measuring 12.4mm thick, built from layered NTPT carbon composite for a light, distinctive marbled surface. NTPT carbon is a thin-ply carbon-fibre composite formed from stacked sheets, and each case shows a unique random grain pattern because the layers cut differently in every block.

Carbon Tachymetric Bezel and Pushers

The forged NTPT carbon bezel rings the dial with a tachymetric scale for reading average speed over a measured distance. The bezel carbon matches the case for the full All Carbon look that defines this 46490 build. Screw-down chronograph pushers sit on either side of the screw-down crown at 3 o’clock, and each pusher locks down to support the 100-meter water resistance.

Sapphire Crystal and Caseback

Scratch-resistant sapphire crystal with anti-reflective coating covers the carbon dial and resists daily knocks for years of clear reading. The crystal sits flush against the carbon case for a low, modern profile. The solid screw-down caseback seals the chronograph movement and holds water resistance to 100 meters, supported by the screw-down crown and locking pushers.

Dial & Markers

Carbon-Finish Dial with Lemon-Yellow Accents

The carbon-finish dial of this Daytona DiW Carbon 46490 super clone carries a textured carbon surface that matches the case and bezel for the full All Carbon look. Bright lemon-yellow accents ring the three sub-dials and mark the chronograph track, setting a sharp, high-contrast pop against the dark carbon base.

Three Chronograph Sub-Dials

The dial of this 46490 Lemon Edition Super Clone carries three sub-dials in the Cosmograph Daytona layout. The three sub-dial functions are listed below.

  1. Small seconds: Runs continuously at 6 o’clock to confirm the watch is running.
  2. 30-minute counter: Sits at 3 o’clock and tracks elapsed chronograph minutes.
  3. 12-hour counter: Sits at 9 o’clock and tracks elapsed chronograph hours.

Hands, Markers and Symmetry

The dial carries applied hour markers and a central chronograph seconds hand that runs smoothly at 28,800 vibrations per hour. Lemon-yellow detailing on the chronograph hand and sub-dial rings keeps the carbon dial legible at a glance. The applied Rolex coronet sits at 12 o’clock, and the All Carbon Lemon Edition keeps the balanced three-register symmetry of the Cosmograph Daytona.

Movement & Specifications

Swiss-Grade Caliber 4130 Clone Movement

The Rolex Daytona DiW Carbon 46490 super clone runs on a Swiss-grade automatic chronograph movement engineered to reproduce the genuine Rolex Caliber 4130 in feel, frequency, and autonomy. The movement operates at 28,800 vibrations per hour, winds bidirectionally through a free-rotating rotor, and holds a 72-hour power reserve for three days off the wrist.

Accuracy and Chronograph Performance

Daily deviation holds within -5 to +8 seconds per day after factory regulation, close to the chronometer standard of the genuine Caliber 4130. The chronograph starts, stops, and resets cleanly through the screw-down pushers. The central chronograph seconds hand sweeps smoothly and returns to zero on reset, confirming the Swiss-grade build of this 46490 Carbon Super Clone.

Spec grid:

Type:Automatic chronograph
Frequency:28,800 vph (4 Hz)
Power Reserve:72 hours
Jewels:44
Winding:Automatic bidirectional
Functions:Hours, minutes, small seconds, chronograph
Bracelet & Strap

Black Rubber Strap and Folding Clasp

The Daytona DiW Carbon 46490 super clone carries a black rubber strap, the natural pairing for a carbon-composite sport chronograph. The rubber strap matches the dark carbon case and bezel and uses a textured surface for a secure, modern feel against the skin.

Wrist Feel, Weight and Comfort

The watch weighs approximately 95 grams on the rubber strap, lighter than a steel Daytona because forged carbon cuts case weight. The folding clasp closes flush and holds the strap securely through daily wear and sport use. The 40mm carbon case and flexible rubber strap sit comfortably on wrists from 6.5 to 8 inches.

Forged NTPT Carbon Case 40mm All Carbon Build

The Rolex Daytona DiW Carbon 46490 super clone carries a 40mm Oyster-profile case measuring 12.4mm thick, built from layered NTPT carbon composite for a light, distinctive marbled surface. NTPT carbon is a thin-ply carbon-fibre composite formed from stacked sheets, and each case shows a unique random grain pattern because the layers cut differently in every block.

Carbon Tachymetric Bezel and Pushers

The forged NTPT carbon bezel rings the dial with a tachymetric scale for reading average speed over a measured distance. The bezel carbon matches the case for the full All Carbon look that defines this 46490 build. Screw-down chronograph pushers sit on either side of the screw-down crown at 3 o’clock, and each pusher locks down to support the 100-meter water resistance.

Sapphire Crystal and Caseback

Scratch-resistant sapphire crystal with anti-reflective coating covers the carbon dial and resists daily knocks for years of clear reading. The crystal sits flush against the carbon case for a low, modern profile. The solid screw-down caseback seals the chronograph movement and holds water resistance to 100 meters, supported by the screw-down crown and locking pushers.

Carbon-Finish Dial with Lemon-Yellow Accents

The carbon-finish dial of this Daytona DiW Carbon 46490 super clone carries a textured carbon surface that matches the case and bezel for the full All Carbon look. Bright lemon-yellow accents ring the three sub-dials and mark the chronograph track, setting a sharp, high-contrast pop against the dark carbon base.

Three Chronograph Sub-Dials

The dial of this 46490 Lemon Edition Super Clone carries three sub-dials in the Cosmograph Daytona layout. The three sub-dial functions are listed below.

  1. Small seconds: Runs continuously at 6 o’clock to confirm the watch is running.
  2. 30-minute counter: Sits at 3 o’clock and tracks elapsed chronograph minutes.
  3. 12-hour counter: Sits at 9 o’clock and tracks elapsed chronograph hours.

Hands, Markers and Symmetry

The dial carries applied hour markers and a central chronograph seconds hand that runs smoothly at 28,800 vibrations per hour. Lemon-yellow detailing on the chronograph hand and sub-dial rings keeps the carbon dial legible at a glance. The applied Rolex coronet sits at 12 o’clock, and the All Carbon Lemon Edition keeps the balanced three-register symmetry of the Cosmograph Daytona.

Swiss-Grade Caliber 4130 Clone Movement

The Rolex Daytona DiW Carbon 46490 super clone runs on a Swiss-grade automatic chronograph movement engineered to reproduce the genuine Rolex Caliber 4130 in feel, frequency, and autonomy. The movement operates at 28,800 vibrations per hour, winds bidirectionally through a free-rotating rotor, and holds a 72-hour power reserve for three days off the wrist.

Accuracy and Chronograph Performance

Daily deviation holds within -5 to +8 seconds per day after factory regulation, close to the chronometer standard of the genuine Caliber 4130. The chronograph starts, stops, and resets cleanly through the screw-down pushers. The central chronograph seconds hand sweeps smoothly and returns to zero on reset, confirming the Swiss-grade build of this 46490 Carbon Super Clone.

Spec grid:

Type:Automatic chronograph
Frequency:28,800 vph (4 Hz)
Power Reserve:72 hours
Jewels:44
Winding:Automatic bidirectional
Functions:Hours, minutes, small seconds, chronograph

Black Rubber Strap and Folding Clasp

The Daytona DiW Carbon 46490 super clone carries a black rubber strap, the natural pairing for a carbon-composite sport chronograph. The rubber strap matches the dark carbon case and bezel and uses a textured surface for a secure, modern feel against the skin.

Wrist Feel, Weight and Comfort

The watch weighs approximately 95 grams on the rubber strap, lighter than a steel Daytona because forged carbon cuts case weight. The folding clasp closes flush and holds the strap securely through daily wear and sport use. The 40mm carbon case and flexible rubber strap sit comfortably on wrists from 6.5 to 8 inches.

Case & Crystal

Forged NTPT Carbon Case 40mm All Carbon Build

The Rolex Daytona DiW Carbon 46490 super clone carries a 40mm Oyster-profile case measuring 12.4mm thick, built from layered NTPT carbon composite for a light, distinctive marbled surface. NTPT carbon is a thin-ply carbon-fibre composite formed from stacked sheets, and each case shows a unique random grain pattern because the layers cut differently in every block.

Carbon Tachymetric Bezel and Pushers

The forged NTPT carbon bezel rings the dial with a tachymetric scale for reading average speed over a measured distance. The bezel carbon matches the case for the full All Carbon look that defines this 46490 build. Screw-down chronograph pushers sit on either side of the screw-down crown at 3 o’clock, and each pusher locks down to support the 100-meter water resistance.

Sapphire Crystal and Caseback

Scratch-resistant sapphire crystal with anti-reflective coating covers the carbon dial and resists daily knocks for years of clear reading. The crystal sits flush against the carbon case for a low, modern profile. The solid screw-down caseback seals the chronograph movement and holds water resistance to 100 meters, supported by the screw-down crown and locking pushers.

Dial & Markers

Carbon-Finish Dial with Lemon-Yellow Accents

The carbon-finish dial of this Daytona DiW Carbon 46490 super clone carries a textured carbon surface that matches the case and bezel for the full All Carbon look. Bright lemon-yellow accents ring the three sub-dials and mark the chronograph track, setting a sharp, high-contrast pop against the dark carbon base.

Three Chronograph Sub-Dials

The dial of this 46490 Lemon Edition Super Clone carries three sub-dials in the Cosmograph Daytona layout. The three sub-dial functions are listed below.

  1. Small seconds: Runs continuously at 6 o’clock to confirm the watch is running.
  2. 30-minute counter: Sits at 3 o’clock and tracks elapsed chronograph minutes.
  3. 12-hour counter: Sits at 9 o’clock and tracks elapsed chronograph hours.

Hands, Markers and Symmetry

The dial carries applied hour markers and a central chronograph seconds hand that runs smoothly at 28,800 vibrations per hour. Lemon-yellow detailing on the chronograph hand and sub-dial rings keeps the carbon dial legible at a glance. The applied Rolex coronet sits at 12 o’clock, and the All Carbon Lemon Edition keeps the balanced three-register symmetry of the Cosmograph Daytona.

Movement & Specifications

Swiss-Grade Caliber 4130 Clone Movement

The Rolex Daytona DiW Carbon 46490 super clone runs on a Swiss-grade automatic chronograph movement engineered to reproduce the genuine Rolex Caliber 4130 in feel, frequency, and autonomy. The movement operates at 28,800 vibrations per hour, winds bidirectionally through a free-rotating rotor, and holds a 72-hour power reserve for three days off the wrist.

Accuracy and Chronograph Performance

Daily deviation holds within -5 to +8 seconds per day after factory regulation, close to the chronometer standard of the genuine Caliber 4130. The chronograph starts, stops, and resets cleanly through the screw-down pushers. The central chronograph seconds hand sweeps smoothly and returns to zero on reset, confirming the Swiss-grade build of this 46490 Carbon Super Clone.

Spec grid:

Type:Automatic chronograph
Frequency:28,800 vph (4 Hz)
Power Reserve:72 hours
Jewels:44
Winding:Automatic bidirectional
Functions:Hours, minutes, small seconds, chronograph
Bracelet & Strap

Black Rubber Strap and Folding Clasp

The Daytona DiW Carbon 46490 super clone carries a black rubber strap, the natural pairing for a carbon-composite sport chronograph. The rubber strap matches the dark carbon case and bezel and uses a textured surface for a secure, modern feel against the skin.

Wrist Feel, Weight and Comfort

The watch weighs approximately 95 grams on the rubber strap, lighter than a steel Daytona because forged carbon cuts case weight. The folding clasp closes flush and holds the strap securely through daily wear and sport use. The 40mm carbon case and flexible rubber strap sit comfortably on wrists from 6.5 to 8 inches.

OUR QUALITY PROMISE

Quality Checks Before Shipping

Every timepiece deserves careful attention before it reaches you. Before dispatch, each watch undergoes a visual inspection to review its overall appearance, finishing, and key components.

Visual Inspection

Checking the overall appearance, dial and finishing.

Component Review

Reviewing hands, case, bracelet and clasp.

Final Review

A final check before careful packaging and dispatch.

shopping with confidence

THE ELITE EXPERIENCE

A Better Way to Shop for Timepieces

Enjoy a more reassuring shopping experience with thoughtful service, added protection and convenient delivery with every order.

1-Year Warranty

Added peace of mind with 1-year warranty coverage.

Free Shipping

Complimentary shipping on your order.

Careful Packaging

Carefully packed to help protect your order during transit.