Rolex Daytona Super Clone DiW NTPT Carbon 46490: Lemon Edition Forged Carbon Chronograph
The Rolex Daytona DiW NTPT Carbon 46490 Lemon Edition super clone features a 40mm forged carbon-composite case, a black dial with bright lemon-yellow chronograph accents, and a tachymetric carbon bezel, finished to 98% visual and dimensional parity with a genuine DiW carbon Daytona build. This 46490 Super Clone carries three chronograph sub-dials, screw-down chronograph pushers, and a black rubber strap, priced at $1,599 against a genuine DiW carbon Daytona near $52,000.
This DiW Carbon 46490 Super Clone uses a layered NTPT carbon case and matching tachymetric bezel, a satin-black dial, and lemon-yellow detailing across the sub-dial rings, the chronograph hand, and the minute track. A Swiss-grade clone of Rolex Caliber 4130 drives the chronograph at 28,800 vibrations per hour with a 72-hour power reserve. The watch ships from a top-tier specialist factory with a full quality control pass, insured worldwide delivery, and a 1-year limited warranty.
| Case | 40mm × 12.5mm, forged NTPT carbon composite |
|---|---|
| Dial | Black with lemon-yellow chronograph accents |
| Movement | Swiss-grade Caliber 4130 clone, automatic chronograph |
| Power Reserve | 72 hours |
| Frequency | 28,800 vph (4 Hz) |
| Water Res. | 100 meters |
| Crystal | Sapphire, anti-reflective coating |
| Bezel | Tachymetric scale, forged NTPT carbon |
| Functions | Hours, minutes, small seconds, chronograph |
| Model Code: | DiW 46490 (Lemon Edition) |
| Strap | Black rubber with carbon-pattern folding clasp |
$ 1,599
4-Stage QC
Verified factory
Insured Shipping
DHL · FedEx · 5–10 days
1-Year Warranty
Parts + servicing
Discreet Packaging
Signature required
SSL Secure
Description
Rolex Daytona Super Clone DiW NTPT Carbon 46490: Lemon Edition Forged Carbon Chronograph Overview
The Daytona DiW NTPT Carbon 46490 is a forged carbon-composite custom build of the Rolex Cosmograph Daytona, paired here with a black dial and bright lemon-yellow chronograph accents. This super clone reproduces the DiW 46490 Lemon Edition with a layered NTPT carbon case, a tachymetric carbon bezel, and a black rubber strap for $1,599. Every case layer, sub-dial ring, and accent placement follows the genuine DiW build within tight production tolerance.
Case & Crystal
Case, Pushers and Tachymetric Bezel 40mm Forged NTPT Carbon Build
The Rolex Daytona DiW NTPT Carbon 46490 super clone carries a 40mm Oyster case measuring 12.5mm thick, built from layered NTPT carbon composite for a light, dark, and strong wrist presence. NTPT carbon stacks thin carbon-fibre sheets at alternating angles and bonds them under heat and pressure, which gives every case a unique marbled grain. The screw-down chronograph pushers flank the screw-down crown at 3 o’clock and seal the case for water resistance.
Tachymetric Bezel Geometry and Carbon Finishing
The tachymetric bezel rings the dial with an engraved speed scale and shares the forged NTPT carbon material of the case for a single visual line. This super clone cuts the tachymetric numerals cleanly into the carbon surface so the scale stays legible against the dark grain. The matte carbon finish across the case and bezel reduces glare and separates this build from the polished steel and gold Daytona references.
Sapphire Crystal and Caseback
Scratch-resistant sapphire crystal covers the black dial with an anti-reflective coating for clear reading in direct light. The Daytona carries no Cyclops lens, since the chronograph layout omits a date window, and this 46490 Super Clone keeps that clean flat crystal. The screw-down caseback seals the movement and holds water resistance to 100 meters, supported by the screw-down crown and pusher system.
Dial & Markers
Black Dial with Bright Lemon-Yellow Chronograph Accents
The black dial of this Daytona DiW NTPT Carbon 46490 super clone carries a deep satin black that frames the bright lemon-yellow accents with high contrast. The dial holds applied markers with lume fill, and the lemon-yellow detailing runs through the minute track and the central chronograph seconds hand for a sharp sporting look.
Three Chronograph Sub-Dials
The dial carries three chronograph sub-dials in the genuine Daytona layout. The small seconds sub-dial sits at 6 o’clock, the 30-minute counter sits at 3 o’clock, and the 12-hour counter sits at 9 o’clock. Each sub-dial ring takes a lemon-yellow outline against the black dial, which lifts the counters and confirms the Lemon Edition styling of this 46490 build.
Hands, Text and Symmetry
The hour and minute hands carry lume fill for low-light reading, and the lemon-yellow central chronograph hand tracks elapsed seconds across the dial. The DiW signature replaces the Rolex line on a genuine custom build, and this super clone follows the DiW dial text layout. The three-counter balance and the lemon-yellow accent line give the 46490 a modern, race-ready face.
Movement & Specifications
Swiss-Grade Caliber 4130 Clone Movement
The Rolex Daytona DiW NTPT Carbon 46490 super clone runs on a Swiss-grade automatic chronograph movement engineered to reproduce the genuine Rolex Caliber 4130 in feel, frequency, and autonomy. The movement operates at 28,800 vibrations per hour, winds bidirectionally through a free-rotating rotor, and holds a 72-hour power reserve for three days off the wrist.
Chronograph Accuracy and Performance
Daily deviation holds within -5 to +8 seconds per day after factory regulation, close to the chronometer standard of the genuine Caliber 4130. The chronograph starts, stops, and resets cleanly through the screw-down pushers, and the central chronograph hand returns to zero on reset. The smooth sweeping seconds and the quiet rotor confirm the Swiss-grade build of this 46490 Super Clone.
Spec grid:
Bracelet & Strap
Black Rubber Strap and Carbon-Pattern Clasp
The Daytona DiW NTPT Carbon 46490 super clone carries a black rubber strap, the strap choice DiW pairs with its forged carbon Daytona builds. The rubber strap stays flexible across temperatures, resists sweat and water, and matches the matte carbon case for a single dark tone. A folding clasp with a carbon-pattern surface secures the strap and closes flush against the wrist.
Wrist Feel, Weight and Comfort
The watch weighs approximately 95 grams on the rubber strap, lighter than a steel Daytona because forged carbon reduces case mass. The lighter build gives the 46490 an easy all-day wrist feel while keeping a full 40mm presence. The 40mm carbon case and the supple rubber strap sit comfortably on wrists from 6.5 to 8 inches.
Case, Pushers and Tachymetric Bezel 40mm Forged NTPT Carbon Build
The Rolex Daytona DiW NTPT Carbon 46490 super clone carries a 40mm Oyster case measuring 12.5mm thick, built from layered NTPT carbon composite for a light, dark, and strong wrist presence. NTPT carbon stacks thin carbon-fibre sheets at alternating angles and bonds them under heat and pressure, which gives every case a unique marbled grain. The screw-down chronograph pushers flank the screw-down crown at 3 o’clock and seal the case for water resistance.
Tachymetric Bezel Geometry and Carbon Finishing
The tachymetric bezel rings the dial with an engraved speed scale and shares the forged NTPT carbon material of the case for a single visual line. This super clone cuts the tachymetric numerals cleanly into the carbon surface so the scale stays legible against the dark grain. The matte carbon finish across the case and bezel reduces glare and separates this build from the polished steel and gold Daytona references.
Sapphire Crystal and Caseback
Scratch-resistant sapphire crystal covers the black dial with an anti-reflective coating for clear reading in direct light. The Daytona carries no Cyclops lens, since the chronograph layout omits a date window, and this 46490 Super Clone keeps that clean flat crystal. The screw-down caseback seals the movement and holds water resistance to 100 meters, supported by the screw-down crown and pusher system.
Black Dial with Bright Lemon-Yellow Chronograph Accents
The black dial of this Daytona DiW NTPT Carbon 46490 super clone carries a deep satin black that frames the bright lemon-yellow accents with high contrast. The dial holds applied markers with lume fill, and the lemon-yellow detailing runs through the minute track and the central chronograph seconds hand for a sharp sporting look.
Three Chronograph Sub-Dials
The dial carries three chronograph sub-dials in the genuine Daytona layout. The small seconds sub-dial sits at 6 o’clock, the 30-minute counter sits at 3 o’clock, and the 12-hour counter sits at 9 o’clock. Each sub-dial ring takes a lemon-yellow outline against the black dial, which lifts the counters and confirms the Lemon Edition styling of this 46490 build.
Hands, Text and Symmetry
The hour and minute hands carry lume fill for low-light reading, and the lemon-yellow central chronograph hand tracks elapsed seconds across the dial. The DiW signature replaces the Rolex line on a genuine custom build, and this super clone follows the DiW dial text layout. The three-counter balance and the lemon-yellow accent line give the 46490 a modern, race-ready face.
Swiss-Grade Caliber 4130 Clone Movement
The Rolex Daytona DiW NTPT Carbon 46490 super clone runs on a Swiss-grade automatic chronograph movement engineered to reproduce the genuine Rolex Caliber 4130 in feel, frequency, and autonomy. The movement operates at 28,800 vibrations per hour, winds bidirectionally through a free-rotating rotor, and holds a 72-hour power reserve for three days off the wrist.
Chronograph Accuracy and Performance
Daily deviation holds within -5 to +8 seconds per day after factory regulation, close to the chronometer standard of the genuine Caliber 4130. The chronograph starts, stops, and resets cleanly through the screw-down pushers, and the central chronograph hand returns to zero on reset. The smooth sweeping seconds and the quiet rotor confirm the Swiss-grade build of this 46490 Super Clone.
Spec grid:
Black Rubber Strap and Carbon-Pattern Clasp
The Daytona DiW NTPT Carbon 46490 super clone carries a black rubber strap, the strap choice DiW pairs with its forged carbon Daytona builds. The rubber strap stays flexible across temperatures, resists sweat and water, and matches the matte carbon case for a single dark tone. A folding clasp with a carbon-pattern surface secures the strap and closes flush against the wrist.
Wrist Feel, Weight and Comfort
The watch weighs approximately 95 grams on the rubber strap, lighter than a steel Daytona because forged carbon reduces case mass. The lighter build gives the 46490 an easy all-day wrist feel while keeping a full 40mm presence. The 40mm carbon case and the supple rubber strap sit comfortably on wrists from 6.5 to 8 inches.
Case & Crystal
Case, Pushers and Tachymetric Bezel 40mm Forged NTPT Carbon Build
The Rolex Daytona DiW NTPT Carbon 46490 super clone carries a 40mm Oyster case measuring 12.5mm thick, built from layered NTPT carbon composite for a light, dark, and strong wrist presence. NTPT carbon stacks thin carbon-fibre sheets at alternating angles and bonds them under heat and pressure, which gives every case a unique marbled grain. The screw-down chronograph pushers flank the screw-down crown at 3 o’clock and seal the case for water resistance.
Tachymetric Bezel Geometry and Carbon Finishing
The tachymetric bezel rings the dial with an engraved speed scale and shares the forged NTPT carbon material of the case for a single visual line. This super clone cuts the tachymetric numerals cleanly into the carbon surface so the scale stays legible against the dark grain. The matte carbon finish across the case and bezel reduces glare and separates this build from the polished steel and gold Daytona references.
Sapphire Crystal and Caseback
Scratch-resistant sapphire crystal covers the black dial with an anti-reflective coating for clear reading in direct light. The Daytona carries no Cyclops lens, since the chronograph layout omits a date window, and this 46490 Super Clone keeps that clean flat crystal. The screw-down caseback seals the movement and holds water resistance to 100 meters, supported by the screw-down crown and pusher system.
Dial & Markers
Black Dial with Bright Lemon-Yellow Chronograph Accents
The black dial of this Daytona DiW NTPT Carbon 46490 super clone carries a deep satin black that frames the bright lemon-yellow accents with high contrast. The dial holds applied markers with lume fill, and the lemon-yellow detailing runs through the minute track and the central chronograph seconds hand for a sharp sporting look.
Three Chronograph Sub-Dials
The dial carries three chronograph sub-dials in the genuine Daytona layout. The small seconds sub-dial sits at 6 o’clock, the 30-minute counter sits at 3 o’clock, and the 12-hour counter sits at 9 o’clock. Each sub-dial ring takes a lemon-yellow outline against the black dial, which lifts the counters and confirms the Lemon Edition styling of this 46490 build.
Hands, Text and Symmetry
The hour and minute hands carry lume fill for low-light reading, and the lemon-yellow central chronograph hand tracks elapsed seconds across the dial. The DiW signature replaces the Rolex line on a genuine custom build, and this super clone follows the DiW dial text layout. The three-counter balance and the lemon-yellow accent line give the 46490 a modern, race-ready face.
Movement & Specifications
Swiss-Grade Caliber 4130 Clone Movement
The Rolex Daytona DiW NTPT Carbon 46490 super clone runs on a Swiss-grade automatic chronograph movement engineered to reproduce the genuine Rolex Caliber 4130 in feel, frequency, and autonomy. The movement operates at 28,800 vibrations per hour, winds bidirectionally through a free-rotating rotor, and holds a 72-hour power reserve for three days off the wrist.
Chronograph Accuracy and Performance
Daily deviation holds within -5 to +8 seconds per day after factory regulation, close to the chronometer standard of the genuine Caliber 4130. The chronograph starts, stops, and resets cleanly through the screw-down pushers, and the central chronograph hand returns to zero on reset. The smooth sweeping seconds and the quiet rotor confirm the Swiss-grade build of this 46490 Super Clone.
Spec grid:
Bracelet & Strap
Black Rubber Strap and Carbon-Pattern Clasp
The Daytona DiW NTPT Carbon 46490 super clone carries a black rubber strap, the strap choice DiW pairs with its forged carbon Daytona builds. The rubber strap stays flexible across temperatures, resists sweat and water, and matches the matte carbon case for a single dark tone. A folding clasp with a carbon-pattern surface secures the strap and closes flush against the wrist.
Wrist Feel, Weight and Comfort
The watch weighs approximately 95 grams on the rubber strap, lighter than a steel Daytona because forged carbon reduces case mass. The lighter build gives the 46490 an easy all-day wrist feel while keeping a full 40mm presence. The 40mm carbon case and the supple rubber strap sit comfortably on wrists from 6.5 to 8 inches.
OUR QUALITY PROMISE
Quality Checks Before Shipping
Every timepiece deserves careful attention before it reaches you. Before dispatch, each watch undergoes a visual inspection to review its overall appearance, finishing, and key components.
Visual Inspection
Checking the overall appearance, dial and finishing.
Component Review
Reviewing hands, case, bracelet and clasp.
Final Review
A final check before careful packaging and dispatch.
THE ELITE EXPERIENCE
A Better Way to Shop for Timepieces
Enjoy a more reassuring shopping experience with thoughtful service, added protection and convenient delivery with every order.
1-Year Warranty
Added peace of mind with 1-year warranty coverage.
Free Shipping
Complimentary shipping on your order.
Careful Packaging
Carefully packed to help protect your order during transit.








