Richard Mille RM 53-01 Super Clone: Pablo Mac Donough Tourbillon Carbon NTPT

The Richard Mille RM 53-01 super clone reproduces the NTPT carbon tonneau case of the Pablo Mac Donough polo signature reference, paired with a suspended skeleton dial, a laminated polycarbonate sapphire crystal, and a white rubber strap with a titanium deployant buckle. This RM 53-01 Super Clone uses a Swiss-grade skeleton clone movement built to mirror the tourbillon and cable-suspension visual identity at 98% parity, priced at $2,650 against a genuine market figure above $900,000.

This Pablo Mac Donough Richard Mille Super Clone carries a tonneau case measuring 49.94mm by 42.70mm with a 16.15mm height, machined from NTPT carbon and held together by six grade 5 titanium spline screws. The front crystal layers a polycarbonate film between two sapphire plates so the case absorbs polo-grade impact without crystal failure, the engineering brief that defined the genuine RM 53-01. A Swiss-grade hand-wound mechanical clone movement drives the timekeeping at 21,600 vibrations per hour with an approximate 70-hour power reserve, with a tourbillon-style cage visible at 6 o’clock and a braided cable layout running across the dial to mimic the suspended movement of the genuine caliber. Richard Mille released the RM 53-01 in 2018 as a 30-piece limited edition built around Pablo Mac Donough, the Argentinian polo player who took the high-goal handicap to the wrist of the maison. The watch ships from a top-tier specialist factory that produces the complete watch, with a full quality control pass, insured worldwide delivery, and a 1-year limited warranty.

Reference RM 53-01 Pablo Mac Donough
Case 49.94mm x 42.70mm, NTPT carbon, six titanium spline screws
Dial Skeletonised with suspended movement and braided cable mount
Movement Swiss-grade tourbillon-style skeleton clone, hand-wound mechanical
Power Reserve Approximately 70 hours
Frequency 21,600 vph (3 Hz)
Water Res. 50 meters
Crystal Laminated polycarbonate sapphire, anti-reflective coating, sapphire caseback
Bezel NTPT carbon with polished titanium spline screws
Functions Hours, minutes, tourbillon-style display at 6
Case Height 16.15mm
Strap White rubber with titanium deployant buckle

$ 2,650

4-Stage QC

Verified factory

Insured Shipping

DHL · FedEx · 5–10 days

1-Year Warranty

Parts + servicing

Discreet Packaging

Signature required

SSL Secure

Description

Richard Mille RM 53-01 Super Clone: Pablo Mac Donough Tourbillon Carbon NTPT Overview

The Richard Mille RM 53-01 is the Pablo Mac Donough polo signature reference, built here with an NTPT carbon tonneau case, a laminated polycarbonate sapphire crystal, a suspended skeleton dial, and a white rubber strap on a titanium deployant buckle. This super clone follows the RM 53-01 reference with a 49.94mm by 42.70mm case held by six titanium spline screws, a visible tourbillon-style cage at 6 o’clock, and a braided cable layout that mimics the shock-isolation movement mount of the genuine 30-piece edition for $2,650. The tonneau geometry, the carbon layering, the cable graphic across the dial, and the shaped crystal track the genuine reference within tight production tolerance.

Case & Crystal

Tonneau Case, Crown and Lug Profile 49.94mm NTPT Carbon Build

The Richard Mille RM 53-01 super clone carries a tonneau case measuring 49.94mm long by 42.70mm wide and 16.15mm thick, machined to the curved Richard Mille silhouette that the Pablo Mac Donough reference made famous on the polo field. The case is built from NTPT carbon, a layered composite that gives the bezel and caseback ring a marbled visual texture and a high strength-to-weight ratio. Six polished grade 5 titanium spline screws ring the bezel and bond the three-part case together, and the screw-down crown at 2 o’clock seals the build for water resistance to 50 meters. The lug-integrated strap mount flows directly into the case so the rubber strap continues the tonneau line across the wrist.

NTPT Carbon and Grade 5 Titanium Construction

The NTPT carbon used across the bezel and caseback ring of the RM 53-01 super clone is a North Thin Ply Technology composite that stacks hundreds of carbon filament layers at alternating angles, giving the case a hard, light, and shock-absorbent shell. The grade 5 titanium spline screws, the crown, and the deployant buckle handle the structural connections and the wrist contact points where impact and corrosion resistance matter most. This super clone follows the carbon and titanium architecture of the genuine RM 53-01 so the watch reads correctly under close inspection on weight, surface pattern, and edge geometry, and the full assembly holds under sport-grade wrist movement.

Laminated Polycarbonate Sapphire Crystal

The front crystal on the RM 53-01 layers a polycarbonate film between two sapphire plates, the same shatter-resistant lamination Richard Mille engineered for the genuine reference to handle polo mallet impacts and ball strikes during high-goal play. The laminated build keeps the crystal clear under angled light and resists shattering on impact, which is the protective brief that drove the original engineering. Anti-reflective coating on the crystal keeps the suspended skeleton dial and the tourbillon-style cage readable in bright outdoor light, and the curved sapphire caseback shows the skeleton clone movement from below.

Tonneau Case, Crown and Lug Profile 49.94mm NTPT Carbon Build

The Richard Mille RM 53-01 super clone carries a tonneau case measuring 49.94mm long by 42.70mm wide and 16.15mm thick, machined to the curved Richard Mille silhouette that the Pablo Mac Donough reference made famous on the polo field. The case is built from NTPT carbon, a layered composite that gives the bezel and caseback ring a marbled visual texture and a high strength-to-weight ratio. Six polished grade 5 titanium spline screws ring the bezel and bond the three-part case together, and the screw-down crown at 2 o’clock seals the build for water resistance to 50 meters. The lug-integrated strap mount flows directly into the case so the rubber strap continues the tonneau line across the wrist.

NTPT Carbon and Grade 5 Titanium Construction

The NTPT carbon used across the bezel and caseback ring of the RM 53-01 super clone is a North Thin Ply Technology composite that stacks hundreds of carbon filament layers at alternating angles, giving the case a hard, light, and shock-absorbent shell. The grade 5 titanium spline screws, the crown, and the deployant buckle handle the structural connections and the wrist contact points where impact and corrosion resistance matter most. This super clone follows the carbon and titanium architecture of the genuine RM 53-01 so the watch reads correctly under close inspection on weight, surface pattern, and edge geometry, and the full assembly holds under sport-grade wrist movement.

Laminated Polycarbonate Sapphire Crystal

The front crystal on the RM 53-01 layers a polycarbonate film between two sapphire plates, the same shatter-resistant lamination Richard Mille engineered for the genuine reference to handle polo mallet impacts and ball strikes during high-goal play. The laminated build keeps the crystal clear under angled light and resists shattering on impact, which is the protective brief that drove the original engineering. Anti-reflective coating on the crystal keeps the suspended skeleton dial and the tourbillon-style cage readable in bright outdoor light, and the curved sapphire caseback shows the skeleton clone movement from below.

Suspended Skeleton Dial with Braided Cable Mount Visual

The skeletonised dial of this RM 53-01 super clone shows the movement architecture from the front and carries the braided steel cable graphic that the genuine reference uses to suspend the caliber inside the case. The cable layout runs from the upper bridges to the lower mount points and frames the tourbillon-style cage at 6 o’clock, mirroring the shock-isolation mount that defines the Pablo Mac Donough reference. The skeleton bridges sit on a grade 5 titanium baseplate and carry satin and polished finishing across the visible plates. The visible cable run, the cage position, and the bridge cut-outs follow the genuine RM 53-01 layout closely.

Applied Richard Mille and Pablo Mac Donough Branding

Applied “Richard Mille” branding sits on the upper bridge of the RM 53-01 super clone in a polished metal finish, with the “Pablo Mac Donough” signature applied across the lower dial section that confirms the polo collaboration identity. The applied logo set follows the placement and the proportion of the genuine 30-piece run, with the polo signature anchoring the lower half of the open architecture. The hour and minute hands run in skeletonised sword form so the cable mount and the tourbillon cage stay visible behind them.

Tonneau Layout, Tourbillon Cage Window and Legibility

The tonneau case shape extends the dial vertically, which gives the suspended skeleton display extra real estate for the cable mount and the tourbillon-style cage window at 6 o’clock. The skeletonised hour and minute hands stay legible against the open architecture through the polished finish and the contrast against the dark titanium baseplate, and the chapter ring carries the minute track around the inner edge for precise reading. The NTPT carbon bezel frames the open dial in a marbled dark surface that pushes the focus onto the suspended movement underneath.

Swiss-Grade Tourbillon-Style Skeleton Clone Movement

The Richard Mille RM 53-01 super clone runs on a Swiss-grade hand-wound mechanical skeleton movement engineered to match the visible architecture of the genuine RM 53-01 caliber, including the tourbillon-style cage at 6 o’clock and the braided cable layout across the dial. The movement operates at 21,600 vibrations per hour, winds by hand through the crown at 2 o’clock, and holds an approximate 70-hour power reserve for nearly three days off the wrist. The caliber drives the central hours and minutes across a grade 5 titanium baseplate and bridges, the same architectural material that the genuine RM 53-01 uses for shock resistance and weight reduction. The tourbillon-style display at 6 carries the visual identity of the genuine cage and remains a decorative cage rather than a true working tourbillon escapement.

Shock Resistance, Accuracy and Daily Performance

Daily deviation holds within -5 to +8 seconds per day after factory regulation, close to the chronometer band that buyers expect from a Swiss-grade hand-wound build. The grade 5 titanium baseplate and bridges give the movement a strong, light core that handles wrist shock during active wear, which is the architectural reasoning behind the genuine RM 53-01 cable-suspension caliber. The 50-meter water resistance and the screw-down crown let the RM 53-01 super clone hold its seal through daily wear, hand washing, and light water contact, in line with the polo-grade active positioning of the Pablo Mac Donough reference.

Spec grid:Type

TypeHand-wound mechanical, skeleton
Frequency21,600 vph (3 Hz)
Power ReserveApproximately 70 hours
BaseplateGrade 5 titanium
BridgesGrade 5 titanium, satin and polished finished
FunctionsHours, minutes, tourbillon-style cage display at 6

White Rubber Strap and Titanium Deployant Buckle

The RM 53-01 super clone carries a white rubber strap, the strap style Richard Mille pairs with the Pablo Mac Donough reference for visual contrast against the dark NTPT carbon case. The strap uses a soft, flexible rubber compound that holds its shape across long-term wear, with integrated lugs that flow into the tonneau case for the continuous Richard Mille silhouette. A grade 5 titanium deployant buckle closes flush against the wrist for a secure hold and lets the buyer remove the watch without flexing the strap repeatedly. The RM 53-01 uses the white rubber strap on the carbon variant and not a metal bracelet, in line with the genuine 30-piece edition.

Wrist Feel, Sizing and Comfort

The watch weighs approximately 95 grams on the full white rubber strap, which gives the RM 53-01 the light wrist presence buyers expect from a carbon and titanium Richard Mille. The 49.94mm by 42.70mm tonneau case wears closer to a 44mm round watch on the wrist due to the curved geometry, and the 16.15mm height carries the visible cage and cable architecture without an exaggerated stack height. The RM 53-01 super clone sits comfortably on wrists from 6.75 to 8.25 inches with the titanium deployant buckle adjusted across the strap holes, with the lightweight carbon shell keeping the watch from rolling on smaller wrists.

Reviews

There are no reviews yet.

Be the first to review “Richard Mille RM 53-01 Super Clone: Pablo Mac Donough Tourbillon Carbon NTPT”

Your email address will not be published. Required fields are marked *

OUR QUALITY PROMISE

Quality Checks Before Shipping

Every timepiece deserves careful attention before it reaches you. Before dispatch, each watch undergoes a visual inspection to review its overall appearance, finishing, and key components.

Visual Inspection

Checking the overall appearance, dial and finishing.

Component Review

Reviewing hands, case, bracelet and clasp.

Final Review

A final check before careful packaging and dispatch.

shopping with confidence

THE ELITE EXPERIENCE

A Better Way to Shop for Timepieces

Enjoy a more reassuring shopping experience with thoughtful service, added protection and convenient delivery with every order.

1-Year Warranty

Added peace of mind with 1-year warranty coverage.

Free Shipping

Complimentary shipping on your order.

Careful Packaging

Carefully packed to help protect your order during transit.