Richard Mille RM 53-01 Super Clone: Tourbillon Yas Marina Circuit Edition

The Richard Mille RM 53-01 Yas Marina Circuit super clone carries the NTPT carbon tonneau case of the cable-suspended tourbillon polo watch, finished in the green and yellow racing colours of the Abu Dhabi Yas Marina Formula 1 circuit. The case measures 49.94mm by 42.70mm with six titanium spline screws, and a skeletonised dial shows the suspended tourbillon architecture in the same green and yellow palette as the circuit theme. The watch lists at $2,650 against a genuine market figure above $900,000.

This Yas Marina Circuit edition reads the RM 53-01 from the wrist as a racing-themed iteration of the suspended-cable polo tourbillon, paired with a green and yellow rubber strap and a grade 5 titanium deployant buckle. The case stands 16.15mm tall and uses NTPT (North Thin Ply Technology) carbon for the upper and lower halves with a polycarbonate laminate front sapphire crystal, the shock-resistant material specification the genuine RM 53-01 uses to survive polo mallet strikes. A hand-wound skeleton mechanical movement at 21,600 vibrations per hour drives the central hours, minutes, and an exhibition tourbillon at 6 o’clock, with the visible cable-suspension architecture detailed across the bridges in the same Yas Marina palette. Power reserve runs approximately 70 hours, and water resistance holds to 50 meters. Richard Mille launched the RM 53-01 in 2018 as the second-generation polo reference, after the original RM 053 Pablo Mac Donough, and the suspended cable architecture remains one of the most engineered shock systems in modern watchmaking. The Yas Marina Circuit edition layers the Abu Dhabi F1 racing identity over that polo tourbillon platform, which pairs the two motorsport-and-polo brand pillars of Richard Mille into a single watch. This super clone ships from a top-tier specialist factory that produces the complete watch, with a full quality control pass, insured worldwide delivery, and a 1-year limited warranty.

Reference RM 53-01 Yas Marina Circuit
Case 49.94mm x 42.70mm NTPT carbon, six titanium spline screws
Dial Skeletonised with green and yellow Yas Marina accents
Movement Hand-wound skeleton mechanical, tourbillon-styled at 6 o’clock
Power Reserve Approximately 70 hours
Frequency 21,600 vph (3 Hz)
Water Res. 50 meters
Crystal Polycarbonate laminate front sapphire crystal, sapphire caseback
Bezel NTPT carbon with polished titanium spline screws
Functions Hours, minutes, exhibition tourbillon at 6 o’clock
Case Height 16.15mm
Functions Green and yellow rubber with titanium deployant buckle

$ 2,650

4-Stage QC

Verified factory

Insured Shipping

DHL · FedEx · 5–10 days

1-Year Warranty

Parts + servicing

Discreet Packaging

Signature required

SSL Secure

Description

Richard Mille RM 53-01 Super Clone: Tourbillon Yas Marina Circuit Edition Overview

The Richard Mille RM 53-01 is the second-generation Pablo Mac Donough polo tourbillon, and the Yas Marina Circuit edition reskins that platform in the green and yellow racing colours of the Abu Dhabi Formula 1 venue. This super clone follows the genuine reference with a 49.94mm by 42.70mm NTPT carbon tonneau case, a 16.15mm height, six titanium spline screws, and a skeletonised dial with applied “Yas Marina Circuit” branding. The tourbillon-styled exhibition sits at 6 o’clock under a polycarbonate laminate front sapphire crystal, with the cable-suspension visual detailing rendered across the green and yellow bridges in the racing palette. The watch lists at $2,650 with a green and yellow rubber strap and a titanium deployant buckle.

Case & Crystal

NTPT Carbon Tonneau Case 49.94mm Yas Marina Build

The Richard Mille RM 53-01 super clone carries a tonneau case measuring 49.94mm long by 42.70mm wide and 16.15mm thick, milled into the curved Richard Mille silhouette that the polo collaboration defined. The case uses NTPT carbon for the upper and lower halves, layered in the diagonal weave pattern that gives every genuine RM 53-01 its grain-like surface texture. NTPT carbon, an aerospace material engineered from thin carbon plies pressed at offset angles, sits among the lightest and most shock-resistant case materials in modern watchmaking, and the layered weave reads as a unique fingerprint on every individual case. Six polished titanium spline screws ring the bezel, and the screw-down crown at 2 o’clock seals the case for water resistance to 50 meters.

NTPT Carbon, Grade 5 Titanium and Polycarbonate Laminate Crystal

The NTPT carbon construction of the RM 53-01 super clone delivers a hard, lightweight surface that reads in the hand as warmer and lighter than steel and as more shock-tolerant than ceramic. The grade 5 titanium spline screws and the internal caseband structure give the watch a strong, light core that keeps total weight under 90 grams on the rubber strap. The Yas Marina Circuit edition layers the green and yellow racing accents over this carbon-and-titanium platform without compromising the structural architecture of the genuine reference. The polycarbonate laminate front sapphire crystal repeats the genuine RM 53-01 specification, a layered crystal stack that resists shattering on impact and that addresses the polo-mallet shock risk the reference was engineered to survive.

Sapphire Caseback and Spline Screw Detailing

The sapphire caseback shows the hand-wound skeleton movement from below, with the cable-suspension bridge architecture and the tourbillon-styled cage visible across the open back. The six titanium spline screws sit polished against the matte NTPT carbon weave, which is the visual signature buyers recognise across every Richard Mille reference. The screw-down crown supports the 50-meter water resistance rating, and the integrated lug geometry flows directly into the rubber strap without separate spring bars on the exterior.

NTPT Carbon Tonneau Case 49.94mm Yas Marina Build

The Richard Mille RM 53-01 super clone carries a tonneau case measuring 49.94mm long by 42.70mm wide and 16.15mm thick, milled into the curved Richard Mille silhouette that the polo collaboration defined. The case uses NTPT carbon for the upper and lower halves, layered in the diagonal weave pattern that gives every genuine RM 53-01 its grain-like surface texture. NTPT carbon, an aerospace material engineered from thin carbon plies pressed at offset angles, sits among the lightest and most shock-resistant case materials in modern watchmaking, and the layered weave reads as a unique fingerprint on every individual case. Six polished titanium spline screws ring the bezel, and the screw-down crown at 2 o’clock seals the case for water resistance to 50 meters.

NTPT Carbon, Grade 5 Titanium and Polycarbonate Laminate Crystal

The NTPT carbon construction of the RM 53-01 super clone delivers a hard, lightweight surface that reads in the hand as warmer and lighter than steel and as more shock-tolerant than ceramic. The grade 5 titanium spline screws and the internal caseband structure give the watch a strong, light core that keeps total weight under 90 grams on the rubber strap. The Yas Marina Circuit edition layers the green and yellow racing accents over this carbon-and-titanium platform without compromising the structural architecture of the genuine reference. The polycarbonate laminate front sapphire crystal repeats the genuine RM 53-01 specification, a layered crystal stack that resists shattering on impact and that addresses the polo-mallet shock risk the reference was engineered to survive.

Sapphire Caseback and Spline Screw Detailing

The sapphire caseback shows the hand-wound skeleton movement from below, with the cable-suspension bridge architecture and the tourbillon-styled cage visible across the open back. The six titanium spline screws sit polished against the matte NTPT carbon weave, which is the visual signature buyers recognise across every Richard Mille reference. The screw-down crown supports the 50-meter water resistance rating, and the integrated lug geometry flows directly into the rubber strap without separate spring bars on the exterior.

Skeletonised Dial with Suspended Tourbillon Architecture

The skeletonised dial of this RM 53-01 super clone shows the movement bridges, the cable-suspension visual detailing, and the tourbillon-styled cage at 6 o’clock from the front, with no traditional dial plate covering the architecture. The open design lets the buyer read both the time and the suspended-cable engineering through the polycarbonate laminate sapphire, which is the signature visual identity of every Richard Mille polo reference. This super clone matches the bridge cut-out shape, the green and yellow cable detailing, and the open architecture of the genuine Yas Marina Circuit reference rendered on the RM 53-01 platform.

Yas Marina Green and Yellow Racing Accents

The Yas Marina Circuit edition applies the green and yellow racing colours of the Abu Dhabi Formula 1 venue across the bridges, the chapter ring, and the tourbillon-styled cage. Green carries the upper bridges and the perimeter accents, and yellow runs across the cable detailing and the tourbillon cage outline. The applied “Yas Marina Circuit” branding sits on the upper bridge in the same green and yellow palette, with the “Richard Mille” name printed on the chapter ring. The skeleton hour and minute hands run in skeletonised baton form with yellow tips for high-contrast time reading against the green bridge structure.

Tonneau Layout, Tourbillon at 6 and Legibility

The tonneau case shape extends the dial vertically, which gives the skeletonised display extra real estate for the visible cable-suspension architecture and the tourbillon-styled cage at 6 o’clock. The skeleton hour and minute hands stay legible against the open bridges through the yellow-tipped contrast, and the chapter ring carries the minute track around the outer edge for precise reading. The tourbillon-styled exhibition at 6 o’clock rotates within the cage to deliver the suspended-tourbillon visual reading that the RM 53-01 launched, and the green and yellow palette frames the architecture without colour interference from the chapter ring.

Hand-Wound Skeleton Movement With Tourbillon-Styled Architecture

The Richard Mille RM 53-01 Yas Marina Circuit super clone runs on a hand-wound skeleton mechanical movement engineered to resemble the genuine Richard Mille RM 53-01 caliber from the dial and caseback sides. The movement operates at 21,600 vibrations per hour, winds by hand through the crown at 2 o’clock, and holds a power reserve of approximately 70 hours for nearly three days off the wrist. The caliber drives the central hours and minutes across a grade 5 titanium baseplate and bridges, the same architectural choice the genuine RM 53-01 uses for shock resistance and weight reduction, with a tourbillon-styled cage exhibition at 6 o’clock that delivers the suspended-tourbillon visual reading buyers expect from this reference. The replica caliber renders the cable-suspension detailing across the bridges as visual architecture and not as a true working cable-suspended tourbillon escapement.

Accuracy, Shock Resistance and Daily Performance

Daily deviation holds within -5 to +8 seconds per day after factory regulation, close to the chronometer band that buyers expect from a Swiss-grade hand-wound build. The grade 5 titanium baseplate and bridges give the movement a strong, light core that handles shock during sport use, which is the architectural reasoning behind the genuine cable-suspended RM 53-01. The polycarbonate laminate front sapphire crystal absorbs impact across the case face, the 50-meter water resistance and the screw-down crown let the watch hold its seal through daily wear, and the 70-hour autonomy lets the buyer rest the watch over a weekend without losing the set time.

Spec grid:

TypeHand-wound mechanical, skeleton
Frequency21,600 vph (3 Hz)
Power ReserveApproximately 70 hours
BaseplateGrade 5 titanium
BridgesGrade 5 titanium, green and yellow accented
FunctionsHours, minutes, tourbillon-styled exhibition at 6 o’clock

Yas Marina Green and Yellow Rubber Strap and Titanium Deployant Buckle

The RM 53-01 Yas Marina Circuit super clone carries a green and yellow rubber strap that mirrors the racing palette of the Abu Dhabi Formula 1 circuit across the dial and case. The strap uses a soft, flexible rubber compound that holds its shape across long-term wear, with integrated lugs that flow into the tonneau case for the continuous Richard Mille silhouette. A grade 5 titanium deployant buckle closes flush against the wrist for a secure hold and lets the buyer remove the watch without flexing the strap repeatedly. The two-tone green and yellow rubber pairs directly with the dial palette and reads as a coordinated colour story across the full watch.

Wrist Feel, Sizing and Comfort

The watch weighs approximately 85 grams on the full green and yellow rubber strap, which gives the RM 53-01 the featherweight wrist presence that NTPT carbon and grade 5 titanium deliver. The 49.94mm by 42.70mm tonneau case wears closer to a 44mm round watch on the wrist due to the curved geometry, and the 16.15mm height clears most shirt cuffs with a small visible profile under the cuff edge. The RM 53-01 Yas Marina Circuit Super Clone sits comfortably on wrists from 6.5 to 8 inches with the deployant buckle adjusted across the strap holes.

Reviews

There are no reviews yet.

Be the first to review “Richard Mille RM 53-01 Super Clone: Tourbillon Yas Marina Circuit Edition”

Your email address will not be published. Required fields are marked *

OUR QUALITY PROMISE

Quality Checks Before Shipping

Every timepiece deserves careful attention before it reaches you. Before dispatch, each watch undergoes a visual inspection to review its overall appearance, finishing, and key components.

Visual Inspection

Checking the overall appearance, dial and finishing.

Component Review

Reviewing hands, case, bracelet and clasp.

Final Review

A final check before careful packaging and dispatch.

shopping with confidence

THE ELITE EXPERIENCE

A Better Way to Shop for Timepieces

Enjoy a more reassuring shopping experience with thoughtful service, added protection and convenient delivery with every order.

1-Year Warranty

Added peace of mind with 1-year warranty coverage.

Free Shipping

Complimentary shipping on your order.

Careful Packaging

Carefully packed to help protect your order during transit.