Richard Mille RM 59-01 Super Clone: Tourbillon Yohan Blake Green and Yellow Ceramic
The Richard Mille RM 59-01 super clone features the green and yellow ATZ ceramic tonneau case of the Yohan Blake signature edition paired with a skeletonised Jamaican-flag dial and a rubber strap, finished to 98% visual and dimensional parity with the genuine reference. This RM 59-01 Super Clone runs a Swiss-grade hand-wound mechanical skeleton movement engineered to resemble the RM 59-01 tourbillon architecture with an approximately 48-hour power reserve, priced at $1,799 against a genuine market figure above $620,000.
This green and yellow ceramic Richard Mille Super Clone uses a tonneau-shaped case measuring 50mm long by 42.70mm wide and 16.15mm thick, built around a grade 5 titanium caseband fixed with six titanium spline screws. A Swiss-grade clone of the RM 59-01 hand-wound skeleton movement drives the timekeeping at 21,600 vibrations per hour with a power reserve of approximately 48 hours, with a fixed seconds carriage at 6 o’clock styled to read as the signature tourbillon cage of the genuine reference. Richard Mille released the RM 59-01 in 2010 as a 50-piece limited edition for the Jamaican sprinter Yohan Blake, who took the 100m silver and 200m silver at the 2012 London Olympic Games. The white-bridge architecture, the Jamaican green and yellow palette, and the applied “Yohan Blake” branding on the upper bridge match the genuine reference layout. The watch ships from a top-tier specialist factory that produces the complete watch, with a full quality control pass, insured worldwide delivery, and a 1-year limited warranty.
| Reference | RM 59-01 Yohan Blake |
|---|---|
| Case | 50mm x 42.70mm, green and yellow ATZ ceramic, grade 5 titanium caseband |
| Dial | Skeletonised with Jamaican-flag green and yellow accents |
| Movement | Swiss-grade hand-wound skeleton, RM 59-01 tourbillon-style architecture |
|---|---|
| Power Reserve | Approximately 48 hours |
| Frequency | 21,600 vph (3 Hz) |
| Water Res. | 50 meters |
| Crystal | Sapphire with anti-reflective coating, sapphire caseback |
| Bezel | Green ATZ ceramic with six polished titanium spline screws |
| Functions | Hours, minutes, tourbillon-style seconds carriage at 6 o’clock |
| Case Height | 16.15mm |
| Strap | Green or yellow rubber with titanium deployant buckle |
$ 1,799
4-Stage QC
Verified factory
Insured Shipping
DHL · FedEx · 5–10 days
1-Year Warranty
Parts + servicing
Discreet Packaging
Signature required
SSL Secure
Description
Richard Mille RM 59-01 Super Clone: Tourbillon Yohan Blake Green and Yellow Ceramic Overview
The Richard Mille RM 59-01 is the Yohan Blake signature tonneau watch, built here with a green and yellow ATZ ceramic case, a grade 5 titanium caseband, and a skeletonised dial in the Jamaican flag palette. This super clone follows the RM 59-01 reference with a 50mm by 42.70mm case, six polished titanium spline screws, a fixed seconds carriage at 6 o’clock styled to resemble the genuine tourbillon cage, and a rubber strap with a titanium deployant buckle for $1,799. The tonneau geometry, the bridge cut-outs under the open dial, the green and yellow colour split, and the applied “Yohan Blake” branding track the genuine reference within tight production tolerance.
Case & Crystal
Tonneau Case, Crown and Spline Screw Profile: 50mm Green and Yellow Ceramic Build
The Richard Mille RM 59-01 super clone carries a tonneau case measuring 50mm long by 42.70mm wide and 16.15mm thick, machined to the curved Richard Mille silhouette that the Yohan Blake reference made famous. The case uses green ATZ ceramic for the upper bezel and yellow ATZ ceramic for the lower caseback ring, paired with a grade 5 titanium caseband that holds the structural rigidity of the build. Six polished titanium spline screws ring the bezel and tie into the engineered look of the RM 59-01, and the screw-down crown at 2 o’clock seals the case for water resistance to 50 meters. The two-tone ceramic split carries the Jamaican flag identity onto the case itself, a defining trait of the limited edition.
Green and Yellow ATZ Ceramic and Grade 5 Titanium Construction
The green and yellow ATZ ceramic case sections of the RM 59-01 super clone deliver a hard, scratch-resistant surface that holds the saturated Jamaican-flag colour across long-term wear. ATZ ceramic, an alumina-toughened zirconia composite, sits among the hardest engineered materials used in modern watchmaking and gives the case the matte sport finish buyers expect from this reference. The grade 5 titanium caseband provides a strong, light core that keeps the watch comfortable across an athletic day on the wrist. This super clone follows the genuine ceramic-and-titanium construction so the RM 59-01 reads correctly under close inspection on weight, surface texture, and edge geometry.
Sapphire Crystal, Sapphire Caseback and Spline Screw Set
Scratch-resistant sapphire crystal with anti-reflective coating covers the skeletonised dial and lets full light through to the open bridges and the seconds carriage below. The curved sapphire follows the tonneau profile and stays clear under angled light, a signature look of the RM 59-01. The sapphire caseback shows the hand-wound skeleton movement from the rear, including the visible mainspring barrel and the gear train, and the six titanium spline screws on the bezel match a matching set on the caseback for the engineered Richard Mille fastener language.
Tonneau Case, Crown and Spline Screw Profile: 50mm Green and Yellow Ceramic Build
The Richard Mille RM 59-01 super clone carries a tonneau case measuring 50mm long by 42.70mm wide and 16.15mm thick, machined to the curved Richard Mille silhouette that the Yohan Blake reference made famous. The case uses green ATZ ceramic for the upper bezel and yellow ATZ ceramic for the lower caseback ring, paired with a grade 5 titanium caseband that holds the structural rigidity of the build. Six polished titanium spline screws ring the bezel and tie into the engineered look of the RM 59-01, and the screw-down crown at 2 o’clock seals the case for water resistance to 50 meters. The two-tone ceramic split carries the Jamaican flag identity onto the case itself, a defining trait of the limited edition.
Green and Yellow ATZ Ceramic and Grade 5 Titanium Construction
The green and yellow ATZ ceramic case sections of the RM 59-01 super clone deliver a hard, scratch-resistant surface that holds the saturated Jamaican-flag colour across long-term wear. ATZ ceramic, an alumina-toughened zirconia composite, sits among the hardest engineered materials used in modern watchmaking and gives the case the matte sport finish buyers expect from this reference. The grade 5 titanium caseband provides a strong, light core that keeps the watch comfortable across an athletic day on the wrist. This super clone follows the genuine ceramic-and-titanium construction so the RM 59-01 reads correctly under close inspection on weight, surface texture, and edge geometry.
Sapphire Crystal, Sapphire Caseback and Spline Screw Set
Scratch-resistant sapphire crystal with anti-reflective coating covers the skeletonised dial and lets full light through to the open bridges and the seconds carriage below. The curved sapphire follows the tonneau profile and stays clear under angled light, a signature look of the RM 59-01. The sapphire caseback shows the hand-wound skeleton movement from the rear, including the visible mainspring barrel and the gear train, and the six titanium spline screws on the bezel match a matching set on the caseback for the engineered Richard Mille fastener language.
Skeletonised Dial with Jamaican-Flag Green and Yellow Accents
The skeletonised dial of this RM 59-01 super clone shows the movement bridges, the mainspring barrel, and the gear train from the front, with no traditional dial plate covering the architecture. The bridges carry yellow and green PVD accents that frame the open chapter ring, with the green tracing the inner ring and the yellow lifting the upper bridge into the Jamaican flag identity. This super clone matches the bridge cut-out shape, the colour placement, and the open architecture of the genuine RM 59-01 Yohan Blake dial.
Tourbillon-Style Seconds Carriage at 6 O’Clock
The RM 59-01 super clone carries a fixed seconds carriage at 6 o’clock that is finished and shaped to resemble the genuine tourbillon cage, with the same circular cage outline, spoke pattern, and bridge geometry visible through the sapphire. The carriage holds the running seconds hand and a small balance display, giving the visual presence of the genuine reference’s tourbillon escapement. The genuine RM 59-01 carries a true working tourbillon at this position, and the super clone delivers the appearance of the cage rather than a working tourbillon mechanism, which is the standard architecture across the super clone tier at this price.
Applied “Yohan Blake” Branding and Skeletonised Hands
The upper bridge carries applied “Yohan Blake” branding in white print over the green PVD finish, and the lower bridge carries the “RICHARD MILLE” and “RM 59-01” markings in the same applied style. The skeleton hour and minute hands run in skeletonised baton form with luminous fill on the inner edges, giving a clear time reading against the open bridges. The chapter ring carries an outer minute track for precise reading, and the green and yellow contrast keeps the dial legible across day and indoor light.
Swiss-Grade Hand-Wound Skeleton Movement with RM 59-01 Tourbillon-Style Architecture
The Richard Mille RM 59-01 super clone runs on a Swiss-grade hand-wound mechanical skeleton movement engineered to resemble the genuine Richard Mille RM 59-01 tourbillon caliber in layout, frequency, and bridge geometry. The movement operates at 21,600 vibrations per hour, winds by hand through the crown at 2 o’clock, and holds a power reserve of approximately 48 hours for two days off the wrist. The caliber drives the central hours and minutes across a grade 5 titanium baseplate and bridges, the same architectural choice the genuine RM 59-01 caliber uses for shock resistance and weight reduction during athletic wear.
Accuracy, Shock Resistance and Tourbillon Appearance Note
Daily deviation holds within -5 to +8 seconds per day after factory regulation, close to the chronometer band buyers expect from a Swiss-grade hand-wound build at this tier. The grade 5 titanium baseplate and bridges give the movement a strong, light core that handles shock during sport use, which is the architectural reasoning behind the genuine RM 59-01 built for sprinter Yohan Blake. The visible seconds carriage at 6 o’clock delivers the visual signature of the genuine tourbillon escapement without the true rotating tourbillon mechanism, an important disclosure for buyers comparing the super clone to the genuine reference. The 50-meter water resistance and the screw-down crown let the RM 59-01 super clone hold its seal through daily wear, hand washing, and light water contact.
Spec grid:
Green or Yellow Rubber Strap and Titanium Deployant Buckle
The RM 59-01 super clone carries a rubber strap available in green or yellow to match the Jamaican-flag identity that Richard Mille pairs with the Yohan Blake reference. The strap uses a soft, flexible rubber compound that holds its shape across long-term wear, with integrated lugs that flow into the tonneau case for the continuous Richard Mille silhouette. A grade 5 titanium deployant buckle closes flush against the wrist for a secure hold and lets the buyer remove the watch without flexing the strap repeatedly. The RM 59-01 uses the rubber strap on this ceramic limited edition and not a metal bracelet, matching the athletic positioning of the Yohan Blake collaboration.
Wrist Feel, Sizing and Comfort for the 50mm Tonneau
RM 59-01 Yohan Blake vs RM 055 Bubba Watson vs RM 27-01 Rafael Nadal — Which Richard Mille Athlete Reference to BuyThe watch sits comfortably on the wrist due to the curved tonneau geometry, which makes the 50mm by 42.70mm case wear closer to a 46mm round watch on a 7-inch wrist. The titanium caseband and the ceramic case sections combine for a balanced weight under 110 grams on the rubber strap, lighter than steel sports watches of similar visual size. The 16.15mm case height clears most shirt cuffs and stays comfortable for a full day, and the deployant buckle adjusts across the strap holes to fit wrists from 6.5 to 8 inches. The strap option in green or yellow lets the buyer match the visual emphasis to the dominant ceramic side of the case.
OUR QUALITY PROMISE
Quality Checks Before Shipping
Every timepiece deserves careful attention before it reaches you. Before dispatch, each watch undergoes a visual inspection to review its overall appearance, finishing, and key components.
Visual Inspection
Checking the overall appearance, dial and finishing.
Component Review
Reviewing hands, case, bracelet and clasp.
Final Review
A final check before careful packaging and dispatch.
THE ELITE EXPERIENCE
A Better Way to Shop for Timepieces
Enjoy a more reassuring shopping experience with thoughtful service, added protection and convenient delivery with every order.
1-Year Warranty
Added peace of mind with 1-year warranty coverage.
Free Shipping
Complimentary shipping on your order.
Careful Packaging
Carefully packed to help protect your order during transit.











Reviews
There are no reviews yet.