Richard Mille RM 68-01 Super Clone: Tourbillon Cyril Kongo Hand-Painted Skeleton Carbon TPT
The Richard Mille RM 68-01 super clone carries the Cyril Kongo signature graffiti palette across hand-painted skeleton bridges, set inside a Carbon TPT tonneau case with a grade 5 titanium caseband and a black rubber strap. This RM 68-01 Super Clone matches the 30-piece genuine collaboration on case geometry, bridge colour layout, and tourbillon-position styling at 98% visual parity for $1,799 against a genuine market figure above $700,000.
The RM 68-01 Cyril Kongo Super Clone uses a tonneau-shaped case measuring 49.94mm long by 42.70mm wide and 16.80mm thick, machined in Carbon TPT with a grade 5 titanium caseband and six titanium spline screws around the bezel. A Swiss-grade skeleton automatic clone movement drives the timekeeping at 21,600 vibrations per hour with a power reserve of approximately 70 hours, and the sub-dial position at 6 o’clock carries a tourbillon-style visual that mirrors the layout of the genuine RM 68-01 caliber. Cyril Kongo, born Cyril Phan in Toulouse in 1969, is a French graffiti artist who hand-painted the bridges on every one of the 30 genuine pieces produced from 2016, making the RM 68-01 the first Richard Mille to carry hand-applied artwork inside the movement itself. This super clone reproduces the multi-colour bridge palette in red, blue, yellow, and green, the applied “Richard Mille” and “Cyril Kongo” branding, and the open skeleton architecture of the genuine reference. The watch ships from a top-tier specialist factory that produces the complete watch, with a full quality control pass, insured worldwide delivery, and a 1-year limited warranty.
| Reference | RM 68-01 Tourbillon Cyril Kongo |
|---|---|
| Case | 49.94mm x 42.70mm, Carbon TPT, grade 5 titanium caseband |
| Dial | Skeletonised with hand-painted graffiti bridges in red, blue, yellow, green |
| Movement | Swiss-grade skeleton automatic clone with tourbillon-style visual at 6 o’clock |
|---|---|
| Power Reserve | Approximately 70 hours |
| Frequency | 21,600 vph (3 Hz) |
| Water Res. | 50 meters |
| Crystal | Sapphire with anti-reflective coating, sapphire caseback |
| Bezel | Carbon TPT with six titanium spline screws |
| Functions | Hours, minutes, tourbillon-style sub-dial at 6 |
| Case Height | 16.80mm |
| Strap | Black rubber with titanium deployant buckle |
$ 1,799
4-Stage QC
Verified factory
Insured Shipping
DHL · FedEx · 5–10 days
1-Year Warranty
Parts + servicing
Discreet Packaging
Signature required
SSL Secure
Description
Richard Mille RM 68-01 Super Clone: Tourbillon Cyril Kongo Hand-Painted Skeleton Carbon TPT Overview
The Richard Mille RM 68-01 is the Cyril Kongo signature tonneau reference produced in a 30-piece run by Richard Mille from 2016, with hand-painted graffiti bridges that no other Richard Mille edition carries. This super clone follows the RM 68-01 reference with a 49.94mm by 42.70mm Carbon TPT case, a grade 5 titanium caseband, six titanium spline screws, a skeletonised dial showing the multi-colour graffiti bridge palette, and a black rubber strap with a titanium deployant buckle for $1,799. The bridge colour layout, the tonneau geometry, and the tourbillon-position styling at 6 o’clock track the genuine reference within tight production tolerance.
Case & Crystal
Tonneau Case, Crown and Lug Profile 49.94mm Carbon TPT Build
The Richard Mille RM 68-01 super clone carries a tonneau case measuring 49.94mm long by 42.70mm wide and 16.80mm thick, machined to the curved Richard Mille silhouette that every modern RM sports tourbillon shares. The case uses Carbon TPT, a layered composite of carbon fibre sheets compressed at low pressure, for the bezel and caseback ring, paired with a grade 5 titanium caseband that gives the case its structural rigidity. Six polished titanium spline screws sit around the bezel and tie into the engineered visual identity of the RM 68-01, and the screw-down crown at 2 o’clock seals the case for water resistance to 50 meters.
Carbon TPT and Grade 5 Titanium Construction
The Carbon TPT bezel and caseback ring of the RM 68-01 super clone deliver the streaked, layered visual texture that the genuine reference launched with, in a hard, light, scratch-resistant composite. Carbon TPT, short for Thin Ply Technology, layers hundreds of woven carbon sheets to under 50 microns each before pressing them under heat, which is the same construction language Richard Mille uses for several of its sport tourbillon references. The grade 5 titanium caseband provides a strong, light core that keeps the watch under 110 grams on the rubber strap. This super clone follows the genuine Carbon TPT and titanium construction so the RM 68-01 reads correctly under close inspection on weight, surface texture, and edge geometry.
Sapphire Crystal and Sapphire Caseback
Scratch-resistant sapphire crystal with anti-reflective coating covers the skeletonised dial and lets full light reach the hand-painted bridges below. The curved sapphire follows the tonneau profile and stays clear under angled light, which is the key to reading the Cyril Kongo bridge colours from any angle. The sapphire caseback shows the skeleton clone movement from below, including the visible automatic rotor and the gear train, and the screw-down crown supports the 50-meter water resistance of the reference.
Tonneau Case, Crown and Lug Profile 49.94mm Carbon TPT Build
The Richard Mille RM 68-01 super clone carries a tonneau case measuring 49.94mm long by 42.70mm wide and 16.80mm thick, machined to the curved Richard Mille silhouette that every modern RM sports tourbillon shares. The case uses Carbon TPT, a layered composite of carbon fibre sheets compressed at low pressure, for the bezel and caseback ring, paired with a grade 5 titanium caseband that gives the case its structural rigidity. Six polished titanium spline screws sit around the bezel and tie into the engineered visual identity of the RM 68-01, and the screw-down crown at 2 o’clock seals the case for water resistance to 50 meters.
Carbon TPT and Grade 5 Titanium Construction
The Carbon TPT bezel and caseback ring of the RM 68-01 super clone deliver the streaked, layered visual texture that the genuine reference launched with, in a hard, light, scratch-resistant composite. Carbon TPT, short for Thin Ply Technology, layers hundreds of woven carbon sheets to under 50 microns each before pressing them under heat, which is the same construction language Richard Mille uses for several of its sport tourbillon references. The grade 5 titanium caseband provides a strong, light core that keeps the watch under 110 grams on the rubber strap. This super clone follows the genuine Carbon TPT and titanium construction so the RM 68-01 reads correctly under close inspection on weight, surface texture, and edge geometry.
Sapphire Crystal and Sapphire Caseback
Scratch-resistant sapphire crystal with anti-reflective coating covers the skeletonised dial and lets full light reach the hand-painted bridges below. The curved sapphire follows the tonneau profile and stays clear under angled light, which is the key to reading the Cyril Kongo bridge colours from any angle. The sapphire caseback shows the skeleton clone movement from below, including the visible automatic rotor and the gear train, and the screw-down crown supports the 50-meter water resistance of the reference.
Skeletonised Dial with Hand-Painted Graffiti Bridges
The skeletonised dial of this RM 68-01 super clone shows the movement bridges, the mainspring barrel, and the gear train from the front, with no traditional dial plate covering the architecture. The bridges carry the hand-painted graffiti-style palette in red, blue, yellow, and green that defines the Cyril Kongo collaboration, applied across the skeleton structure in the loose, freehand brush language the artist made his signature. This super clone matches the colour placement, the satin finishing on the bridges, and the open architecture of the genuine Cyril Kongo collaboration.
Applied Branding and Sub-Dial Tourbillon Layout
The RM 68-01 carries applied “Richard Mille” branding at 12 o’clock and applied “Cyril Kongo” branding at 9 o’clock, set against the colour-painted bridges in a contrasting tone that holds legibility against the busy graffiti palette. The sub-dial position at 6 o’clock carries the tourbillon-style visual that mirrors the cage cut-out of the genuine RM 68-01 caliber, framed by a circular bridge ring in the Kongo colour palette. The skeleton hour and minute hands run in skeleton baton form, giving a clear time reading against the painted bridges, and the central pinion sits cleanly above the dial centre.
Tonneau Layout and Legibility
The tonneau case shape extends the dial vertically, which gives the skeletonised display extra real estate for the visible movement architecture and the multi-colour bridge artwork. The skeleton hour and minute hands stay legible against the painted bridges through the contrast of the polished metal hand finish, and the chapter ring carries the minute track around the outer edge for precise reading. The Carbon TPT bezel frames the dial in a dark, layered border that lets the painted colour palette read as the main visual focus.
Swiss-Grade Skeleton Automatic Clone Movement with Tourbillon Visual
The Richard Mille RM 68-01 super clone runs on a Swiss-grade skeleton automatic mechanical movement engineered to match the visual architecture of the genuine Richard Mille RM 68-01 caliber, with a tourbillon-style sub-dial layout at 6 o’clock. The movement operates at 21,600 vibrations per hour, winds by both the crown and the automatic rotor, and holds a power reserve of approximately 70 hours for nearly three days off the wrist. The caliber drives the central hours and minutes across a grade 5 titanium baseplate and bridges, with the bridges hand-finished and colour-painted to follow the Kongo collaboration layout.
Tourbillon Appearance vs True Tourbillon Escapement
The sub-dial at 6 o’clock on this RM 68-01 super clone delivers the tourbillon visual of the genuine reference, with the rotating cage layout and the open bridge framing that the Richard Mille caliber is known for. The escapement underneath drives the time function from a standard balance assembly rather than a fully rotating tourbillon cage, which keeps the price at the $1,799 super clone tier rather than the five-figure tourbillon-clone bracket. Buyers gain the on-wrist Kongo collaboration look, the bridge colour palette, and the sub-dial framing of the RM 68-01 without the cost of a working tourbillon module.
Accuracy, Shock Resistance and Daily Performance
Daily deviation holds within -5 to +8 seconds per day after factory regulation, close to the chronometer band that buyers expect from a Swiss-grade automatic build. The grade 5 titanium baseplate and bridges give the movement a strong, light core that handles shock during daily wear, which is the architectural reasoning behind the genuine RM 68-01 caliber. The 50-meter water resistance and the screw-down crown let the RM 68-01 super clone hold its seal through daily wear, hand washing, and light water contact, in line with the active-wear positioning of the Richard Mille sports range.
Spec grid:
Black Rubber Strap and Titanium Deployant Buckle
The RM 68-01 super clone carries a black rubber strap, the strap style Richard Mille pairs with the Cyril Kongo collaboration to let the multi-colour bridge palette carry the visual energy of the watch. The strap uses a soft, flexible rubber compound that holds its shape across long-term wear, with integrated lugs that flow into the tonneau case for the continuous Richard Mille silhouette. A titanium deployant buckle closes flush against the wrist for a secure hold and lets the buyer remove the watch without flexing the strap repeatedly. The RM 68-01 uses the black rubber strap on the genuine Cyril Kongo edition and not a metal bracelet.
Wrist Feel, Sizing and Comfort
The watch weighs approximately 105 grams on the full black rubber strap, which gives the RM 68-01 the light wrist presence buyers expect from a Carbon TPT and titanium Richard Mille. The 49.94mm by 42.70mm tonneau case wears closer to a 44mm round watch on the wrist due to the curved geometry, and the 16.80mm height clears most shirt cuffs with a small lift. The RM 68-01 super clone sits comfortably on wrists from 6.5 to 8 inches with the deployant buckle adjusted across the strap holes.
OUR QUALITY PROMISE
Quality Checks Before Shipping
Every timepiece deserves careful attention before it reaches you. Before dispatch, each watch undergoes a visual inspection to review its overall appearance, finishing, and key components.
Visual Inspection
Checking the overall appearance, dial and finishing.
Component Review
Reviewing hands, case, bracelet and clasp.
Final Review
A final check before careful packaging and dispatch.
THE ELITE EXPERIENCE
A Better Way to Shop for Timepieces
Enjoy a more reassuring shopping experience with thoughtful service, added protection and convenient delivery with every order.
1-Year Warranty
Added peace of mind with 1-year warranty coverage.
Free Shipping
Complimentary shipping on your order.
Careful Packaging
Carefully packed to help protect your order during transit.







Reviews
There are no reviews yet.